Keyless vs Keyed
Moderator: Shoshanah Marohn
I've never understood the physics of it, Earnest. I just know that the 3 keyless guitars I've owned all had hysteresis on the E string, easily measurable and perceptible if you listened closely. Less than a keyed guitar, but it was there.
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
-
- Posts: 1901
- Joined: 29 Aug 1998 12:01 am
- Location: Waterbury Ctr. VT 05677 USA
My Infinity has so little hysteresis it's difficult to perceive on my Boss Chromatic tuner.
Two things I believe kill it. One is the use of larger than normal diameter roller nuts with a smaller than normal axle, and two, roller bearings are used in the changer where the raise mechanism contacts the fingers.
Two things I believe kill it. One is the use of larger than normal diameter roller nuts with a smaller than normal axle, and two, roller bearings are used in the changer where the raise mechanism contacts the fingers.
- David Wright
- Posts: 5258
- Joined: 4 Aug 1998 11:00 pm
- Location: Pilot Point ,Tx USA.
- Contact:
-
- Posts: 62
- Joined: 25 Nov 2005 1:01 am
- Location: Colorado, USA
I've had keyless and keyed guitars over the years and have ended up using keyless guitars exclusively nowadays. I agree that there isn't a huge difference in tone, but my preference has do with some points that I haven't seen anyone mention yet.
I work in local bands in fairly small venues driving to the jobs in cars jammed with pa gear and guitar player's equipment and am now over 60 years old. A keyless guitar is often 3 or 4 inches shorter and 8-10 pounds lighter than a keyed guitar and when space is at a premium, that smaller size and weight matters. I once refitted a tenor sax case to hold a Kline 12 and it made a wonderfully compact,light package that would fit in an airline overhead.
Maybe the fact that the famous players don't use keyless guitars has to do with the fact that most of them have someone else humping the case around for them.
I work in local bands in fairly small venues driving to the jobs in cars jammed with pa gear and guitar player's equipment and am now over 60 years old. A keyless guitar is often 3 or 4 inches shorter and 8-10 pounds lighter than a keyed guitar and when space is at a premium, that smaller size and weight matters. I once refitted a tenor sax case to hold a Kline 12 and it made a wonderfully compact,light package that would fit in an airline overhead.
Maybe the fact that the famous players don't use keyless guitars has to do with the fact that most of them have someone else humping the case around for them.
-
- Posts: 324
- Joined: 4 Aug 1998 11:00 pm
- Location: Marshfield, MO
Pro players
I won't mention a name, but a pro player I talked to at the Texas Convention told me he liked to take a keyless SD-10 on the road or when he had to fly. But he always used his keyed D-10 when he played the Grand Ole Opry for the look.
- George Redmon
- Posts: 3529
- Joined: 8 Apr 2005 12:01 am
- Bill L. Wilson
- Posts: 935
- Joined: 14 Aug 2012 12:31 pm
- Location: Oklahoma, USA
To Keys or Not to Keys.
I sat down to my FIRST and LAST KEYLESS Pedal steel Fri. afternoon at a friends shop here in OKC. I can't stand sliding down to that first fret and nothings left, my hands are way to big, and at 220lbs. I'm a bit large for a steel that small. It was a BMI S-12 converted to E9 10string, and keyless is just to weird for me. plus it moved all over the floor when you hit the Knees. Good guitar, well built, it's just not for me, and that Allen wrench instead of a tuning key is real PITA. I prefer my 20yr. old Road Dog Emmons LGII with TUNING KEYS, over any guitar on the market cause it works for me.
-
- Posts: 2155
- Joined: 23 Jan 1999 1:01 am
- Location: Clinton, Missouri USA
Me too, George. I've owned and played both and keyless is the only way to go. As b0b stated, there was still some hysteresis on the 4th string raise, E to F on my old Williams keyless 400 series. 4 Years ago, I bought a 700 series keyless Williams. Problem has been solved. I asked Bill Rudolph what he did to remedy the problem. He said it was in the changer and he fixed it. He would not tell me what he did though. I can barely construct a square box. It's not like I was going to start manufacturing another steel guitar and go into competition.George Redmon wrote:Keyless hands down. For more reasons then listed here. I'll never go back to those heavy ugly keyed steel guitars.
- Sonny Jenkins
- Posts: 4376
- Joined: 19 Sep 2000 12:01 am
- Location: Texas Masonic Retirement Center,,,Arlington Tx
A common phrase from the 40s-50s,,,that is still applicable today,,,,,,"you ain't a'woofin'",,,,(translation in case it was more of a southern phrase,,means,,,,,"agreed",,,,)George Redmon wrote:Keyless hands down. For more reasons then listed here. I'll never go back to those heavy ugly keyed steel guitars.
-
- Posts: 388
- Joined: 23 Jan 2008 1:02 pm
- Location: Cambridgeshire, UK
And the weight difference, c'mon, guys, that has to count for something too, right? Shorter body equals less weight, and less flex because shorter, so less cabinet drop.
Remember, if you want different outcomes, you have to do something different.
Remember, if you want different outcomes, you have to do something different.
Williams 700 series keyless U12,
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay
Sierra keyless U14, Eezzee-Slide & BJS bars
Moth-eaten old Marshall 150 combo
Roland Cube 80XL, Peterson Strobo+HD,
EarthQuaker Despatch Master for reverb / delay
Having built a tuner with no keys and no nut, because it was all I could make with my limited resources, and having discovered that it works fine and the strings are easy to change which is a shame because they don't break, I am not going to try and improve on it by introducing a load of gearwheels and pulleys and lengths of spare string.
Yes, it's quick to grab a tuning peg, but it's even quicker to knock it by accident.
Yes, it's quick to grab a tuning peg, but it's even quicker to knock it by accident.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
" the Kline never goes out of tune."
True dat!
True dat!
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
Keyless Guitars
Keyless is great for the smaller size and weight and ease of string changing. I also like the difference in tone, although every steel has it's own sound. My dream guitar would be a keyless Emmons LeGrande Double 10. Black, of course!!
Emmons LeGrande D-10
GFI Ultra D-10 keyless
Quilter SteelAire
GFI Ultra D-10 keyless
Quilter SteelAire
-
- Posts: 765
- Joined: 26 Nov 2001 1:01 am
- Location: Lee, New Hampshire, USA
With all of the new lightweight guitars that have been introduced in recent years, I am a little surprised that nobody has come out with a keyless model specifically designed for fly gigs and other situations where transporting a normal steel is difficult. Imagine a steel only slightly longer than its scale length that you could put in a gig bag and take on a bus or subway.
- John Billings
- Posts: 9344
- Joined: 11 Jul 2002 12:01 am
- Location: Ohio, USA
Put it in a gig bag overhead. pack your clothes in the case and check it in.
Dr. Z Surgical Steel amp, amazing!
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
"74 Bud S-10 3&6
'73 Bud S-10 3&5(under construction)
'63 Fingertip S-10, at James awaiting 6 knees
'57 Strat, LP Blue
'91 Tele with 60's Maple neck
Dozen more guitars!
Dozens of amps, but SF Quad reverb, Rick Johnson cabs. JBL 15, '64 Vibroverb for at home.
'52 and '56 Pro Amps
- Bob Tuttle
- Posts: 2002
- Joined: 15 May 1999 12:01 am
- Location: Republic, MO 65738
- Contact:
- Markus Mayerhofer
- Posts: 100
- Joined: 18 Feb 2014 1:44 pm
- Location: Vienna, Austria
- Contact:
Both of my guitars (Sierra and GFI U-12) are keyless.
Stringbreakage goes to a minimum.
I've to admit i'm a very very lazy string-changer, and i cant even remember when i changed strings on my Sierra the last time, but i guess it was about 8 months ago, with excessive practicing and gigging...
Nevertheless i should change strings soon, not to overstretch my luck.
Especially on the GFI changing strings is a very smooth and quick procedure. You dont have to bring the strings to a high tension manually before locking them.
On the Sierra you have to pull hard to bring the strings to relative high tension, especially string 3....otherwise its very hard to bring it on pitch...
But all in all, i'm happy with the keyless systems...
Stringbreakage goes to a minimum.
I've to admit i'm a very very lazy string-changer, and i cant even remember when i changed strings on my Sierra the last time, but i guess it was about 8 months ago, with excessive practicing and gigging...
Nevertheless i should change strings soon, not to overstretch my luck.
Especially on the GFI changing strings is a very smooth and quick procedure. You dont have to bring the strings to a high tension manually before locking them.
On the Sierra you have to pull hard to bring the strings to relative high tension, especially string 3....otherwise its very hard to bring it on pitch...
But all in all, i'm happy with the keyless systems...
- Sonny Jenkins
- Posts: 4376
- Joined: 19 Sep 2000 12:01 am
- Location: Texas Masonic Retirement Center,,,Arlington Tx
-
- Posts: 765
- Joined: 26 Nov 2001 1:01 am
- Location: Lee, New Hampshire, USA
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
-
- Posts: 412
- Joined: 2 Apr 2011 8:14 am
- Location: Queensland, Australia - R.I.P.
- Contact:
Gee Chris - this must be your worst nightmare!
http://bb.steelguitarforum.com/viewtopi ... 62#2393062
It's all in the eyes of the beholder.
http://bb.steelguitarforum.com/viewtopi ... 62#2393062
It's all in the eyes of the beholder.
Priebs GFI ('09)Short-Uni10. GFI ('96)Short-Uni SD11. ('86)JEM U12
www.steelguitardownunder.com
www.steelguitardownunder.com