The Steel Guitar Forum

Sarah, First heard your version of Last Horizon many years ago and was hooked.
Have been a big fan ever since.

Best wishes and speedy recovery.
and thank you

raptor11@att.net

HI Roger
Dont know for sure.
J.R Rose was kind enough to send me some information and from what I understood it may be 69 or earlier Greg Jones would be the one to ask about ser #
The ZB custom logo was replaced when the guitar was refinished.

Many thanks to all for their responses.
Asking 1000.plus shipping as that is what I have in the guitar.
Have not weighed it ( my wife got mad and threw out the bathroom scale )
but Im guessing close to 100Lb in the Case.
from the information kindly sent to me that is more than a fair price.

Thanks

Hi jim
I was hoping someone with ZB expertise could suggest an approximate value.
I would be happy to recover my investment as the guitar is just taking up space but not at the cost of dissapointing a buyer.

Would like to sell,dont know what its worth. ser # 0027 stamped on end plate ( see pic ). 3 knee levers and 9 pedals ( pedal 9 is not connected ). very nice looking and sounding guitar. guitar was refinished long ago,tuners replaced with Grover tuners but with 2 different models ( see pic ). only is...

Sorry if i created some confusion. my copedent which i thought was standard is: pedal A raise string 5 and 10 B raise string 3 and 6 C raise string 4 and 5 pedal 4 and 5 are not connected LKL raise string 4 and 8 LKR lower string 4 and 8 RKL raise string 1 and 7 RKR lower string 2 I would like to ma...

all seeking suggestions. I have an S-11 with 5 pedals and 4 knee levers. standard copedent. pedals 4 and 5 are not connected, I still have all the parts. in reading thru a lot of material in the forum some popular changes that i dont have are: lowering strings 5,6,9 and 10 Raising string 1 and 2 tog...

Hi Jim
I received the Tab/Tracks last night only a few hours after
I sent you a PM (a lot faster than mail ).
all three downloaded via e-mail with no problems. Tabs look GREAT and tracks sound GREAT.
now Im gonna go have some fun.
thanks again Jim

I DONT BELIEVE IT i have spent 1 1/2 weeks trying to get this right and a couple hand fulls of hair. the tricky part was balancing string 1 and 5 since one is raise and one is lower so opposite string tension comes into play. after almost wearing out the threads from moving rods and pivot points and...

Thanks Bob
that helped,had to tighten spring almost to max.
Now string 1 pulls with string 5 but string 9 and 10 dont pull until 1 and 5 reach their limit.
not knowing the C6 neck (yet)just wondering how often would string 1, 5,9 and 10 be used together.

hoping someone has suggestion. I have a ZB D-11 I bought used long ago to explore the C6 neck. The C6 pedals had many problems and were not setup to the standard codependent. with no luck getting the pedal pulls in sync i removed all the rods and started over. Using some of the pictures of the ZB un...

Hi John,
Would you please send me a copy of your Desperado tab.
thank you.

not a problem, i appreciate the help.
again, thanks to all.
i will close topic

GOT It,ya hoo thanks Eric looks like I wont need them but thanks for replying. I think it was Jon who suggested reversing the tuner. I misread and thought he was referring to the two tuner assemblies. I changed the tuner on C6 string 1. the button is offset on opposite side of the main shaft dependi...

thanks Eric,might be best solution without doing some machine work.
do you remember the model # of those tuners?

i may have the first time,after swapping them the spacing was increased but the handle of the C6 string 1 still hits the body of the E9 string 11 tuner and cannot be turned.The problem is that the body and handle ( if that is the correct wording) of the Grover tuner is larger than the original tuner...

i was using as a 10 string but would like to add 11 for a base tone,my s-11 is set up the same way. i did try temporarily reversing the two head stock and it is better. i could shave the headstock for the two tuners in question for further separation but would it take at least 1/8 off of each step,m...

i purchased this guitar from Scotty's over 20 years ago. wanted to explore C6 tuning. finish was severely cracked and peeling so i refinished guitar now looks very nice and for reasons i dont remember i decided to replace tuners with Grovers. at that point the project was set aside. now moving forwa...

Russell Adkins wrote:The guitar still for sale?

yes it is

for sale asking 550.free shipping if in cont.US dont know guitar value,initially priced going by similer guitars up for sale. purchased new in early 60's.used on weekends for several years,has been sitting idle since. still plays and sounds very nice. guitar has some bar dings, missing EHARP plaque ...

Please close Bob, sold

my first post, I hope this is correct. For Sale: Alkire non-pedal steel guitar asking 400.00 case is functional but shows its age. all original except for new tuner keys. tuners for last five strings are stiff. Volume and Tone pots have negligible scratch otherwise guitar plays and sounds great http...