Titanium/aluminum guitar
Moderator: Brad Bechtel
- chas smith
- Posts: 5043
- Joined: 28 Feb 2001 1:01 am
- Location: Encino, CA, USA
Titanium/aluminum guitar
A couple years ago, I wanted a guitar that could bolt onto the side of Guitarzilla, that would have a kindof diatonic tuning and a 25 1/2" scale. I had some titanium tubing, a dozen tuning keys and some aluminum:
-
- Posts: 1037
- Joined: 4 Aug 1998 11:00 pm
- Location: Selkirk, Manitoba, Canada
- Bill Bosler
- Posts: 317
- Joined: 14 Apr 2004 12:01 am
- Location: Schwenksville, Pennsylvania, USA
- Rick Aiello
- Posts: 4701
- Joined: 11 Sep 2000 12:01 am
- Location: Berryville, VA USA
- Contact:
------------------
<font size=1> Aiello's House of Gauss</font>
<font size=1>
My wife and I don't think alike. She donates money to the homeless and I donate money to the topless! ... R. Dangerfield</font>
-
- Posts: 66
- Joined: 15 Apr 2005 12:01 am
- Location: Arizona, USA
-
- Posts: 1632
- Joined: 4 May 2003 12:01 am
- Location: Oahu, Hawaii USA
- Contact:
Chas,
Work of that calibre should "always" be applauded. I look forward with great interest to the musical and mechanical reports and dialogue this instrument and discussion chain is sure to generate. Sure looks like great work to me.
Thanks a mil for sharing your work.
Aloha,
DT~
<font size="1" color="#8e236b"><p align="center">[This message was edited by Denny Turner on 07 July 2005 at 03:18 AM.]</p></FONT>
Work of that calibre should "always" be applauded. I look forward with great interest to the musical and mechanical reports and dialogue this instrument and discussion chain is sure to generate. Sure looks like great work to me.
Thanks a mil for sharing your work.
Aloha,
DT~
<font size="1" color="#8e236b"><p align="center">[This message was edited by Denny Turner on 07 July 2005 at 03:18 AM.]</p></FONT>
- Charlie McDonald
- Posts: 11054
- Joined: 17 Feb 2005 1:01 am
- Location: out of the blue
-
- Posts: 14
- Joined: 27 Apr 2005 12:01 am
- Location: Brookston, Indiana, USA
- Contact:
-
- Posts: 800
- Joined: 21 Sep 2004 12:01 am
- Location: Studio City, California, USA
- Contact:
- chas smith
- Posts: 5043
- Joined: 28 Feb 2001 1:01 am
- Location: Encino, CA, USA
Gentlemen, thank you.
Joe, the knobs are basically tone and tone.
Jon, sonic properties, well, it's a little bright and it doesn't have the "I-used-to-be-a-tree" sound, but it's very musical, especially when it's bolted to the side of Guitarzilla where the titanium "soaks up" the resonance of the larger body.
Bill, as fate would have it, I did some time as an aircraft welder at one of Northrop's subcontractors. I had no idea what we were working on, other than there was a lot of titanium and inconel. The blue welds wouldn't have passed inpection, too hot. Chrome and straw were the limits. But then this thing doesn't have to go mach 2. The current tuning is, top down:
G,E,D,C,B,A,G,E,D,C,B,G.
The thing I like about this tuning is, it has either I and V or I and IV , with the relative minors, on the same fret depending on whether the key is C or G. Granted it's not a "strum" tuning, outside of art music, but then I don't strum. Actually, I did strum it for what was going to be the "Herbie sound", in the recent movie, but I don't know if it made it to the final and I wasn't going to go to the movie to find out.
Joe, the knobs are basically tone and tone.
Jon, sonic properties, well, it's a little bright and it doesn't have the "I-used-to-be-a-tree" sound, but it's very musical, especially when it's bolted to the side of Guitarzilla where the titanium "soaks up" the resonance of the larger body.
Bill, as fate would have it, I did some time as an aircraft welder at one of Northrop's subcontractors. I had no idea what we were working on, other than there was a lot of titanium and inconel. The blue welds wouldn't have passed inpection, too hot. Chrome and straw were the limits. But then this thing doesn't have to go mach 2. The current tuning is, top down:
G,E,D,C,B,A,G,E,D,C,B,G.
The thing I like about this tuning is, it has either I and V or I and IV , with the relative minors, on the same fret depending on whether the key is C or G. Granted it's not a "strum" tuning, outside of art music, but then I don't strum. Actually, I did strum it for what was going to be the "Herbie sound", in the recent movie, but I don't know if it made it to the final and I wasn't going to go to the movie to find out.
-
- Posts: 50
- Joined: 4 Feb 2005 1:01 am
- Location: Oxford, Mississippi, USA
I hope to hear a recording of this some day. Spruce is the primary material for guitar tops, and it has one of the highest strength-to-weight ratios of all woods. Titanium, I know, has a very high strenth-to-weight ratio in the metal family (thus it's use on jets and Mercedes wrenches). I would imagine that it would be very resonant. On a related note (no pun intended), I've got an old aluminum neck Kramer guitar, which I'll probably never sell due to it's sound, although it is a heavy b@$^@rd.