Best Ear Monitors?

About Steel Guitarists and their Music

Moderator: Shoshanah Marohn

Locked
Jeb Baldwin
Posts: 40
Joined: 14 Oct 2003 12:01 am
Location: Climax, North Carolina, USA

Best Ear Monitors?

Post by Jeb Baldwin »

Hey Guys,
Anybody here use ear monitors? I have a Samson unit with Shure E1 ear pieces. I am getting a real distorted sound and my steel dosnt sound meaty. Is there any ear peices that sound normal? This is the first time I have had to use these things. The band I am traveling with has no stage volume and I have to use these things. Any help would be appreciated.
Thanks, Jeb Baldwin

------------------
User avatar
sonbone
Posts: 224
Joined: 4 Aug 1998 11:00 pm
Location: Waxahachie, TX

Post by sonbone »

OK, you might have a hard time with this, but the best sounding ear monitors I've found are cheap Radio Shack ear buds #33-1170. I've tried a big variety of ear monitors, including the famous E-5's and E-1's and the Radio Shack units sound the best for steel IMHO. But ONLY the #33-1170. It's absolutely a freq thing. They might not work for you because they will not get as loud before distorting as ear buds made for monitor systems, but at $9.99 it couldn't hurt to give them a shot.
http://www.radioshack.com/search.asp?cookie%5Ftest=1&find=ear+bud&SRC=1&image1.x=27&image1.y=36

Sonny

------------------
http://geocities.com/sonbone1
sonbone@geocities.com

User avatar
DALE WHITENER
Posts: 629
Joined: 10 Nov 1999 1:01 am
Location: TRINITY,NC USA

Post by DALE WHITENER »

Jeb, I've been using the Shure PSM 400 w/
E1's for about a year and a half with no problems. The key is a good mix. All I use is a Evans preamp w/Tubfex for effects into
a rack mounted direct box. My steel sounds great as do the rest of the band.
Dale<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by DALE WHITENER on 04 February 2004 at 03:23 AM.]</p></FONT>
User avatar
Mike Meese
Posts: 250
Joined: 4 Aug 1998 11:00 pm
Location: Dover, Ohio, U S A GO BUCKEYES! (deceased)
Contact:

Post by Mike Meese »

I've been really happy with my Sensaphonics ProPhonic 2XS in-ear monitors. They're a bit expensive though. I run them through a Shure PSM 400 hardwired.

Sensaphonics website
JAMES BANKS
Posts: 683
Joined: 24 Dec 1998 1:01 am
Location: Mineola,TX USA
Contact:

Post by JAMES BANKS »

JEB, See the post about Sony E-5 earbuds under electronics. Darvin Wilhite and I discussed some ideas.

James

------------------
Zumsteel SD10, Nashville 400, Profex 2, T-60 Peavey, Gibson 335, Vegas 400, Fender Super reverb.

Jeb Baldwin
Posts: 40
Joined: 14 Oct 2003 12:01 am
Location: Climax, North Carolina, USA

Post by Jeb Baldwin »

Thanks guys,
We didnt have internet access last week in Ga. so I could not see the replies. I got the problem fixed. The gain from the board was much too low and this was the distorting problem. I am going to try your idea there Mr. Sonny. It sure sounds good for only 10 dollars. Thanks again for alls help.

Jeb Baldwin

------------------
Jeremy Moyers
Posts: 577
Joined: 4 Aug 1998 11:00 pm
Location: Lubbock, TX
Contact:

Post by Jeremy Moyers »

The question was what is the best ear monitors, correct? I have used alot of different models and can say that I have found the futuresonic molds to be the best. They are expensive, about $1000.00, and you have to go to a hearing doctor to be tested and fitted for them beause they are specially molded for your ears, but the difference is amazing. I had to play with e-1's 2 weeks ago while I had my futuresonics upgraded to their new drivers and it was miserable. It was like going from fm to am. They are also very comfortable. Since they are molded to your ear, they fit perfectly. I can wear mine for a four hour gig and not feel any ear fatigue, and I can go home without my ears ringing. What a concept. I must admit though, I still miss the energy that you get from playing with a good sounding wedge. IMO nothing replaces air moving.

Jeremy
User avatar
b0b
Posts: 29108
Joined: 4 Aug 1998 11:00 pm
Location: Cloverdale, CA, USA
Contact:

Post by b0b »

Moved to "Electronics" section
Locked