If E9 + pedals = A6, why not get an S10?
Moderator: Shoshanah Marohn
-
- Posts: 12505
- Joined: 4 Aug 1998 11:00 pm
- Location: Spicewood TX 78669
- Contact:
Ed
I guess there are some similarities, but I really don't conceive of them as such. Just the way my brain codifies the pedal and its usages.
I guess there are some similarities, but I really don't conceive of them as such. Just the way my brain codifies the pedal and its usages.
My rig: Infinity and Telonics.
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
-
- Posts: 2833
- Joined: 19 Jul 2005 12:01 am
- Location: Santa Rosa, California, USA
John Allison wrote:James, it seems to me that at the heart of your question is the concept of the A6(C6) non-pedal tuning for lap or console steel.
If you're used to C6 or A6 lap steel you can find it very easy to go A/B down and enter familiar territory. I even had my E9 (strings 9 and 10) tuned to give me a full A6 tuning across 7 strings. The shortcoming is that it turns a pedal steel into a lap steel - there aren't too many ways to enhance that tuning with other pedals or levers - the E-Eb lever for a flat 5 is a good one, though.
With the C6 Pedal steel (as well as the 12-string Universal), there's an incredible range of possibilities for harmonized chord melodies and complex extended chords for comping. Even as a beginner on C6 pedal I've been able to find my way into jazz and swing chord progressions that I simply couldn't begin to find on non-pedal.
Well, I wouldn't go as far as to say, "Me too," here. But I know what you probably mean to say. With the pedal guitar I can, as Jeff Newman used to say, "Grab a handful of strings," on the pedal C6 as opposed to picking two or three to more or less express the heart of the chord. Now if I could only get my stool adjusted to sit comfortably behind this thing.....
Amor vincit omnia
I know this is off topic, but
Killer tone, Herb.
As usual....
As usual....
Re: I know this is off topic, but
Yes it is. Is that your Fessenden?Dan Tyack wrote:Killer tone, Herb.
As usual....
-𝕓𝕆𝕓- (admin) - Robert P. Lee - Recordings - Breathe - D6th - Video
-
- Posts: 12505
- Joined: 4 Aug 1998 11:00 pm
- Location: Spicewood TX 78669
- Contact:
Dan, b0b
Thanks for the comps. I cut the samples on 1965 Emmons wraparound. Just an old guitar I have laying around the house here... nothing special.
Thanks for the comps. I cut the samples on 1965 Emmons wraparound. Just an old guitar I have laying around the house here... nothing special.
My rig: Infinity and Telonics.
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
-
- Posts: 12505
- Joined: 4 Aug 1998 11:00 pm
- Location: Spicewood TX 78669
- Contact:
-
- Posts: 975
- Joined: 30 Jan 2007 3:31 pm
- Location: Alabama, USA
The Bass The Bass
If I played the C6 I would miss the boom of the 10th string That is a note to remeber.
"Oh what a tangled web we weave when we first begin to deceive" Someone Famous
- Daniel Morris
- Posts: 1230
- Joined: 30 Jun 2008 10:13 am
- Location: Westlake, Ohio, USA
Thanks for the insight, Herb.
I'm not quite adept enough to enumerate everything the typical P4 offers, but your examples reinforce why I think it's a keeper (even if I'm strictly a U12 player.)
I'm not quite adept enough to enumerate everything the typical P4 offers, but your examples reinforce why I think it's a keeper (even if I'm strictly a U12 player.)
1979 MSA U12 Pedal Steel
1982 Kline U12 Pedal steel
2019 Sierra U12 Pedal Steel
2011 Bear Creek MK Weissenborn
Milkman 40W Mini amps w/Telonics 15" speaker.
Dr. Z Surgical Steel w/TT 15" speaker.
Frenzel MB-50 head.
Spaceman, Empress, Origin, Eventide, Pigtronix.
1982 Kline U12 Pedal steel
2019 Sierra U12 Pedal Steel
2011 Bear Creek MK Weissenborn
Milkman 40W Mini amps w/Telonics 15" speaker.
Dr. Z Surgical Steel w/TT 15" speaker.
Frenzel MB-50 head.
Spaceman, Empress, Origin, Eventide, Pigtronix.
-
- Posts: 445
- Joined: 1 Jul 2015 8:04 am
- Location: Arizona, USA
This is an interesting post that I hadnt seen till Daniel woke it up again. I was wondering about this recently since I acquired a D10 recently and am slowly getting it set up. I found an old B.E. C6 course on ebay which I hope will be a good primer for a new C6 neck player like me. Does this look familiar to any of you guys? From 1983 it says. Great close up of his picks too. The Jeffran stuff was so well done.
It's a weird coincidence that this thread has been revived and has veered towards a discussion of P4 right when the same topic is being discussed on another thread. Or maybe it's deliberate. Or maybe it's Carl Jung's "collective subconscious" in action. May be I should do a poll to find out.
Anyway, to deal with the first question first - some time ago I wondered about building an E9/A6 uni but although it's an obvious and attractive idea, I couldn't figure how to make it work in practice and I accepted that B6 is favoured for a reason.
As for P4, Herb's examples confirm what I suspected - that it really comes into its own in the minor mode. I play uni and there is the problem with there not being enough changes available with 3 up, 3 down - but Rick Schmidt's idea of a half-stop on the A-Bb lever is a light-bulb, nay, a searchlight moment for me! I know that a lot of folks dislike half-stops but I'm fine with them. I shall give it a go when I have time to do the work
Anyway, to deal with the first question first - some time ago I wondered about building an E9/A6 uni but although it's an obvious and attractive idea, I couldn't figure how to make it work in practice and I accepted that B6 is favoured for a reason.
As for P4, Herb's examples confirm what I suspected - that it really comes into its own in the minor mode. I play uni and there is the problem with there not being enough changes available with 3 up, 3 down - but Rick Schmidt's idea of a half-stop on the A-Bb lever is a light-bulb, nay, a searchlight moment for me! I know that a lot of folks dislike half-stops but I'm fine with them. I shall give it a go when I have time to do the work
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
- John Spaulding
- Posts: 330
- Joined: 27 Sep 2017 3:53 pm
- Location: Wisconsin, USA
All of the Buddy Emmons lessons are great.David Weisenthal wrote:This is an interesting post that I hadnt seen till Daniel woke it up again. I was wondering about this recently since I acquired a D10 recently and am slowly getting it set up. I found an old B.E. C6 course on ebay which I hope will be a good primer for a new C6 neck player like me. Does this look familiar to any of you guys? From 1983 it says. Great close up of his picks too. The Jeffran stuff was so well done.
You might want to check out Paul Franklin's C6 Essentials course, too.
This video from Paul's recent seminar in Texas is a nice intro to how Paul teaches the neck: The C6 Tuning
Here's more info on the C6 Essentials Course: C6 Essentials
-
- Posts: 445
- Joined: 1 Jul 2015 8:04 am
- Location: Arizona, USA
- Greg Cutshaw
- Posts: 6610
- Joined: 17 Nov 1998 1:01 am
- Location: Corry, PA, USA
- Contact:
A couple more simple examples of C6 pedal 4 usage:
Example 1:
http://www.gregcutshaw.com/Tab/Tab65.wma
Tab:
http://www.gregcutshaw.com/Tab/Tab65.pdf
Example 2:
http://www.gregcutshaw.com/Tab/Tab612.wma
Tab:
http://www.gregcutshaw.com/Tab/Tab612.pdf
Example 1:
http://www.gregcutshaw.com/Tab/Tab65.wma
Tab:
http://www.gregcutshaw.com/Tab/Tab65.pdf
Example 2:
http://www.gregcutshaw.com/Tab/Tab612.wma
Tab:
http://www.gregcutshaw.com/Tab/Tab612.pdf
- Frank Freniere
- Posts: 3706
- Joined: 23 Oct 1999 12:01 am
- Location: The First Coast
-
- Posts: 13
- Joined: 21 Oct 2018 6:13 pm
- Location: New Jersey, USA
That is on his website with audio clipsDavid Weisenthal wrote:This is an interesting post that I hadnt seen till Daniel woke it up again. I was wondering about this recently since I acquired a D10 recently and am slowly getting it set up. I found an old B.E. C6 course on ebay which I hope will be a good primer for a new C6 neck player like me. Does this look familiar to any of you guys? From 1983 it says. Great close up of his picks too. The Jeffran stuff was so well done.
http://www.buddyemmons.com/BluesToUse.htm
-
- Posts: 763
- Joined: 10 Oct 2016 3:07 pm
- Location: Illinois, USA
-
- Posts: 445
- Joined: 1 Jul 2015 8:04 am
- Location: Arizona, USA
-
- Posts: 12505
- Joined: 4 Aug 1998 11:00 pm
- Location: Spicewood TX 78669
- Contact:
This...Greg Lambert wrote:Without all the technical raises and lowers of strings , if you want to fatten up a song do it on the C6th.
My rig: Infinity and Telonics.
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
- Fred Treece
- Posts: 3920
- Joined: 29 Dec 2015 3:15 pm
- Location: California, USA
This sums up the OP’s concern.Tony Prior wrote:question:
If E9 + pedals = A6, why not get an S10?
short answer:
Probably because now you are at the 6th tuning with pedals IN and restricted.
The C6 neck is with NO Pedals and offers a variety of stuff to add.
I would frame the question as E9 + E lower lever = B6, since you have the low root on string 10. The answer would be very similar, though you are not quite as restricted in terms of pedal and lever options.
Others have made the point that certain C6 chord voicings can be done on E9, but the grips are comparatively awkward. That seems pretty obvious, even to someone like me who doesn’t play C6. Many 4- and 5-note C6 chord voicings are simply not possible on E9, even if the chord partials technically are.
There has been little mention of Extended E9. The two lower strings and a 4x5 configuration should certainly get you further into C6 territory if you wanted to go there. At least, that’s what I’m planning...
-
- Posts: 426
- Joined: 16 Aug 1999 12:01 am
- Location: Alberta, Canada
According to the Winston Bible, Ernie Hagar's A & B worked in reverse, so he would have been unrestricted in A6. Don't think I'll change, though.Tony Prior wrote:question:
If E9 + pedals = A6, why not get an S10?
short answer:
Probably because now you are at the 6th tuning with pedals IN and restricted.
The C6 neck is with NO Pedals and offers a variety of stuff to add.
Is it worth pointing out that B6 is also an E9 tuning but with a sharp 7th instead of a flat one?
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs