What's a good/great electrified resonator?

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Ron Kassof
Posts: 113
Joined: 16 Dec 2008 3:21 pm
Location: Las Vegas, NV, USA

Post by Ron Kassof »

For what it's worth, you might want to try these strings on the Gretsch:
http://www.acousticguitarforum.com/foru ... stcount=28
Dennis Anderson
Posts: 253
Joined: 27 Dec 2012 12:19 pm
Location: Chicago, Illinois

Post by Dennis Anderson »

A good/great electrified resonator? National Resolectric gets my vote.
User avatar
Tommi Toijonen
Posts: 62
Joined: 2 Dec 2013 11:30 am
Location: Kouvola, Finland

Post by Tommi Toijonen »

Tommi Toijonen wrote:Dont know if it's the piezo I'm after... maybe a hundred for the pup would be the budjet. If cheaper, better still.
Quoting myself.... I'm going for DIY route I think. It seems my budget will be around ten euros. :D

I've copied the piezo positioning from KKsound (on the bisquit, right behind the saddle), used a 40 cent piezo and some super glue. Maybe I'll position another one under the cone like some other brand does (now I can't remember which it was). And add a switch to use either or both of 'em.


Image

I ditched the glueing option, it was somehow distorted sounding. Probably too little glue... and I ruined the piezo when trying to fix the buzz.

Made another and this time I used double sided tape that was left over from K&K's mandolin twin fusion system. Now it sounds pretty decent, maybe a bit too bright and not as loud as my Martin's piezo under the bridge. Well, that's why I have my Para DI, for amplifying and tone shaping.

Here it is, input jack in the coverplate hole:

Image
User avatar
Tommi Toijonen
Posts: 62
Joined: 2 Dec 2013 11:30 am
Location: Kouvola, Finland

Post by Tommi Toijonen »

Un update to piezo positioning. Right next to saddle on the bisquit produced quite woody and mellow sound, but it was too low in volume.

I moved it to the cone - half way in between the center and the edge. It's better, very loud and sounds like a resonator. I didn't notice that the acoustic sound would have weakened. Piezo is very light and the K&K goo is excellent stuff for application.

Next I'm going to piezo a spider Hohner. I try to stick the piezo under the cone and route the wire to the south east corner of the guitar (well, like where the output jack normally is located in electric guitars like tele or les paul).
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

tommi...i applaud your thrifty approach. too many musicians throw tons of money at their guitars, when sometimes the best results can come from clever
experimentation with the funky items you have!
Post Reply