For what it's worth, you might want to try these strings on the Gretsch:
http://www.acousticguitarforum.com/foru ... stcount=28
What's a good/great electrified resonator?
Moderator: Brad Bechtel
-
- Posts: 253
- Joined: 27 Dec 2012 12:19 pm
- Location: Chicago, Illinois
- Tommi Toijonen
- Posts: 62
- Joined: 2 Dec 2013 11:30 am
- Location: Kouvola, Finland
Quoting myself.... I'm going for DIY route I think. It seems my budget will be around ten euros.Tommi Toijonen wrote:Dont know if it's the piezo I'm after... maybe a hundred for the pup would be the budjet. If cheaper, better still.
I've copied the piezo positioning from KKsound (on the bisquit, right behind the saddle), used a 40 cent piezo and some super glue. Maybe I'll position another one under the cone like some other brand does (now I can't remember which it was). And add a switch to use either or both of 'em.
I ditched the glueing option, it was somehow distorted sounding. Probably too little glue... and I ruined the piezo when trying to fix the buzz.
Made another and this time I used double sided tape that was left over from K&K's mandolin twin fusion system. Now it sounds pretty decent, maybe a bit too bright and not as loud as my Martin's piezo under the bridge. Well, that's why I have my Para DI, for amplifying and tone shaping.
Here it is, input jack in the coverplate hole:
- Tommi Toijonen
- Posts: 62
- Joined: 2 Dec 2013 11:30 am
- Location: Kouvola, Finland
Un update to piezo positioning. Right next to saddle on the bisquit produced quite woody and mellow sound, but it was too low in volume.
I moved it to the cone - half way in between the center and the edge. It's better, very loud and sounds like a resonator. I didn't notice that the acoustic sound would have weakened. Piezo is very light and the K&K goo is excellent stuff for application.
Next I'm going to piezo a spider Hohner. I try to stick the piezo under the cone and route the wire to the south east corner of the guitar (well, like where the output jack normally is located in electric guitars like tele or les paul).
I moved it to the cone - half way in between the center and the edge. It's better, very loud and sounds like a resonator. I didn't notice that the acoustic sound would have weakened. Piezo is very light and the K&K goo is excellent stuff for application.
Next I'm going to piezo a spider Hohner. I try to stick the piezo under the cone and route the wire to the south east corner of the guitar (well, like where the output jack normally is located in electric guitars like tele or les paul).
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)