| Author |
Topic: Eminence EPS -12 for Peavey Nashville 112!!! |
Mitch Druckman
From:
Arizona, USA
|
Posted 26 Apr 2014 7:56 pm |
|
| The EPS-12C is rated at 450 watts. How does it behave when playing the NV112 at less than full volume. Does it still have good dynamic response and tone with the amp at studio volume? I would expect that for the speaker to shine, it really wants more power than the NV112 can put out. What do you think? |
|
|
|
Tommy White
From:
Nashville
|
Posted 26 Apr 2014 9:14 pm
|
|
Mitch, all I can tell you is, I wouldn't have the Eminence in my amp if it didn't cut . See my first post  |
|
|
|
Jim Priebe
From:
Queensland, Australia - R.I.P.
|
|
|
|
Tommy White
From:
Nashville
|
Posted 27 Apr 2014 4:45 am
|
|
Jim, thank you for posting that link. I should have done so in my first post.
It has been my experience that a speaker's performance begins to decline when pushed to it's peak watts, especially for steel guitar amplification for those of us who prefer clean,punchy tones at any volume.
I deem my initial post viable information to share with those who prefer the aforementioned in speakers and steel guitar sounds.
Last edited by Tommy White on 27 Apr 2014 10:36 pm; edited 2 times in total |
|
|
|
Wayne Quinn
From:
Cape Breton.NovaScotia
|
Posted 27 Apr 2014 5:46 am
|
|
Tommy, or some one who may know, I don,t want to sound to stupid here but before i go ripping and tearing here how does the front grill on the 112 come of ? I don,t want to damage anything. it does not seem to be fastened the same as the Nashville 400 thanks for any help I can get , or does that grill even have to come of in order to change the speaker?.  thanks
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5, |
|
|
|
Roger Francis
From:
kokomo,Indiana, USA
|
Posted 27 Apr 2014 8:42 am
|
|
Wayne, it comes out from the back, take off the bottm pannel and set your reverb tank off to the side but leave it plugged in, it makes things easier, remove the 8 nuts holding it in and it should come out purdy easy
_________________
Rittenberry SD10, 2 nashville 112s with telonics speaker, behringer EPQ450 power amp, 705 pups, Telonics FP-100, live steel strings, mogami cords, wet reverb |
|
|
|
Wayne Quinn
From:
Cape Breton.NovaScotia
|
Posted 27 Apr 2014 10:43 am
|
|
Ok Roger. thanks for that information I just did not want to do something that didn,t need doing Rodger. lol many thanks. Wayne
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5, |
|
|
|
Gary Reed
|
Posted 27 Apr 2014 11:08 am
|
|
Tommy,
What model MOD tank did you install?
Any problems installing? |
|
|
|
Wayne Quinn
From:
Cape Breton.NovaScotia
|
Posted 27 Apr 2014 1:27 pm
|
|
Gary. on another post here Tommy said that he used the MOD.9eb2c1b.this is the number of it. I ordered 1 a few days ago at AMPLIFIED PARTS. should be in the mail now I,am hoping. Tommy may confirm that him self hope iam not stepping out of bounds here Tommy. with this information.
_________________
D10 Carter, SD10 Mullen .Nashville 400,. peavey 112 Boss DD3., RV5, |
|
|
|
Jim Priebe
From:
Queensland, Australia - R.I.P.
|
Posted 27 Apr 2014 2:17 pm
|
|
Tommy
| Quote: |
| a speakers performance begins to decline when pushed to it's peak watts, especially for steel guitar amplification for those of us who prefer clean,punchy tones at any volume. |
This is very relevant. For a long time I used an EV 12L (a 4 ohm model) and it was certainly amazing at staying clean at exceptional volumes however compared to the EPS 12C it is just not as 'sweet'. The other downer is it weighs just under a ton! lol. I feel there is a difference between 'cold clinically clean' and 'sweet clean'.
The Peavey BW 1504 is/was also a great steel speaker however most BW's only get going at higher volumes probably due to stiff cones and surrounds. Larger diameter voice coils seem to handle lower volumes worse in some speakers too (more mass to get moving accurately). The sensitivity of a speaker is a very valid specification - as a benchmark 100+db is always
a good indication.
_________________
Priebs GFI ('09)Short-Uni10. GFI ('96)Short-Uni SD11. ('86)JEM U12
www.steelguitardownunder.com |
|
|
|
Gary Reed
|
Posted 28 Apr 2014 4:33 pm
|
|
Got my telonics 4ohm 12 in today.
I just need to get my settings adjusted.
It seems to want more Mid dialed in, among others.
Went in easy except for different speaker connections.
I just clipped the fat ends off and stuck the poles into the new speaker. |
|
|
|
Howard Parker
From:
Maryland
|
Posted 28 Apr 2014 7:55 pm
|
|
| Gary Reed wrote: |
Howard,
Any problems with gasget replacement? |
No "problem" although a tiny bit of the original paper gasket stuck. I was able to recover it and keep it with the original speaker.
I talked to the Telonics folks at the TX Jamboree after talking to Herb Steiner about his installation.
I am very, very happy.
h |
|
|
|
Richard Tipple
From:
Ohio, USA
|
Posted 29 Apr 2014 7:09 pm
|
|
I installed a new EPS-12C, in my NV112, today & all I can say ,is WOW!! 
The ,honk,is gone & it cleared up the ,Mids, 100%
Im going to install the EPS, in my TC 12" Split Back,
tomorrow just to hear the difference,,,
I don't know how the 12_" split back,can get any better, but Im just the curious type 
Hay thanks again Tommy for the heads up,,,
_________________
steelguitarguy.com |
|
|
|
Paul Awalt
From:
Greenwich, Ct.
|
Posted 30 Apr 2014 9:45 am Nashville112
|
|
| Who sells the EPS 12-C speaker and for how much? |
|
|
|
Tommy White
From:
Nashville
|
Posted 30 Apr 2014 11:59 am
|
|
The retail price is $209. From places on the internet such as Amazon.com.
Guitar Center and Sweet Water. I think Kevin Hatton here on the forum keeps them in stock. You may also try buying direct from Eminence. |
|
|
|
mike nolan
From:
Forest Hills, NY USA
|
Posted 30 Apr 2014 3:57 pm
|
|
| Just got an EPS 15c from Kevin Hatton last week.... fast, easy , no hassle. |
|
|
|
Paul Awalt
From:
Greenwich, Ct.
|
Posted 30 Apr 2014 4:19 pm Eps 12C
|
|
| Thanks Tommy. |
|
|
|
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 30 Apr 2014 10:07 pm
|
|
| Yes, I have them. A serious speaker that will improve a 112 200%. To me the Blue Marvel speaker was always the weak point. If you want to hear what a 112 really sounds like get one of these. The Eminence EPS-12C is the bomb. Makes a 112 a contender. Dramatic difference. Not cheap. Special Forum member price. |
|
|
|
Ken Byng
From:
Southampton, England
|
Posted 1 May 2014 4:41 am
|
|
Tommy has made a good move by swapping out the stock speaker. I can't stand the standard Nashville 112 as it has so much mid honk and the speaker compresses severely and loses definition when pushed hard. We have to remember that this amp was not designed to be played out on medium to large gigs, rather in small rehearsal rooms and bedrooms.
Jim Evans and Dave Beaty both talked about Eminence loudspeakers at a sound seminar at this year's Dallas Show. It was maintained by Jim that the special Neo speakers that Dave commissions from Eminence for his Telonics company are even better for steel guitar than the EPS -C range.
By upgrading the speaker and the reverb tray, Tommy now has a completely different and far more efficient amp than before.
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,
Last edited by Ken Byng on 1 May 2014 8:49 am; edited 1 time in total |
|
|
|
Kevin Hatton
From:
Buffalo, N.Y.
|
Posted 1 May 2014 8:34 am
|
|
| I would not agree with that Telonics statement at all. |
|
|
|
Ken Byng
From:
Southampton, England
|
Posted 1 May 2014 8:51 am
|
|
| Kevin Hatton wrote: |
| I would not agree with that Telonics statement at all. |
Can I ask why Kevin?
_________________
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E, |
|
|
|
Fred Rushing
From:
Odin, IL, USA
|
Posted 2 May 2014 7:28 am The Honk
|
|
I have heard about the Peavey Honk for years and years. Could someone please post a demonstration of the famed Honk with a comparison to an amp without the Honk.
I am a Steel player only. maybe that is why I never really understood the HONK. I just get the tone I want no matter what the amp and play.
Thanks Fred |
|
|
|
Chris Bauer
From:
Nashville, TN USA
|
Posted 11 May 2014 9:12 pm
|
|
| I somehow missed this discussion before and am late to the party. BUT, after hearing your amp tonight, Tommy, I'm sold. Plus, having a great speaker that's lighter is a total 'double-win'. Nice! |
|
|
|
Tommy White
From:
Nashville
|
Posted 11 May 2014 10:42 pm
|
|
| Thank you Chris. It was great to see you again my friend. Thank you for dropping in. |
|
|
|
Andrew Roblin
From:
Various places
|
Posted 30 May 2014 8:48 am
|
|
I'm having a little challenge installing an Eminence EPS-C in my Peavey Nashville 112. Although I've removed the original paper gasket from the baffle board, there still isn't any thread available on the mounting bolts for the locknuts.
Maybe I should remove a little of the foam on the back of the speaker around the mounting bolts.
Does anyone have any suggestions?
Andrew Roblin
International Sho-Bud Brother & Sisterhood
Member #79, Janitor |
|
|
|
