1967 Epiphone Wilshire...
-
- Posts: 6965
- Joined: 26 Dec 2003 1:01 am
- Location: Candor, New York, USA
1967 Epiphone Wilshire...
Made by Gibson USA in 1967..These are really not available anywhere at this price point.. On ebay or at vintage shops, with original finish they go for triple my asking price. This was refinished natural decades ago. Pickups, electronics, guard, nut,frets, tuners, etc are original .. NO BREAKS in neck or headstock, Neck/body joint is solid as a rock.
Someone added an improper tremelo which I removed. This guitar originally came with a stop tail/tuneamatic which I re installed. Stop bar and bridge are recent replacements.
This guitar is a light weight mahogany beauty with great playability and a sweet vintage tone. The old Gibson minis sound killer!
The frets have a lot of life left, but there is some uneven wear, and a dressing would be in order. Make NO mistake, it plays GREAT.. soft low action, NO rattles,NO buzzing, NO "fretting out",, anywhere!..
Just want to disclose any issues..
One pot has a piece of the shaft missing.. That knob is gone also.. It works, turns well etc, but will need to have a new knob, and shaft repaired or pot replaced... Check prices on these on gbase and ebay... This is a killer deal.
comes with hard case... $875 plus shipping.
Someone added an improper tremelo which I removed. This guitar originally came with a stop tail/tuneamatic which I re installed. Stop bar and bridge are recent replacements.
This guitar is a light weight mahogany beauty with great playability and a sweet vintage tone. The old Gibson minis sound killer!
The frets have a lot of life left, but there is some uneven wear, and a dressing would be in order. Make NO mistake, it plays GREAT.. soft low action, NO rattles,NO buzzing, NO "fretting out",, anywhere!..
Just want to disclose any issues..
One pot has a piece of the shaft missing.. That knob is gone also.. It works, turns well etc, but will need to have a new knob, and shaft repaired or pot replaced... Check prices on these on gbase and ebay... This is a killer deal.
comes with hard case... $875 plus shipping.
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time......
no gear list for me.. you don't have the time......
-
- Posts: 748
- Joined: 9 May 2008 7:53 am
- Location: Brooklyn, NY
- Contact:
Mini Humb'ers
To my ears, these are the greatest pups that Gibson made. They sound in between regular 'buckers and P-90's, and seem to be the best of both worlds. If I had spare cash....
- Bob Bender
- Posts: 416
- Joined: 14 Dec 1998 1:01 am
- Location: Left Coast Florida
For a taste of what those mini humbuckers sound like in the hands of a master, check this out:
http://www.youtube.com/watch?v=xGZTikKCJvg
http://www.youtube.com/watch?v=xGZTikKCJvg
- Stu Schulman
- Posts: 6526
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
Bob,I have the same guitar,I bought it from Dan Armstrong when I was a kid,Mine also has the holes from the vibrato which I believe was factory installed,Dan Put the stop tailpiece on mine,and the picksups do sound somewhere between a P-90 and a Humbucker...Someone's gonna get a great guitar,Stu
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
-
- Posts: 6965
- Joined: 26 Dec 2003 1:01 am
- Location: Candor, New York, USA
Stu.. 1967 were mostly all stop tailpieces... This one had the wrong SG style Gibson Vibrola screwed in right over the original stop bushings.. It was a simple matter to take it off, and re install a stop tailpiece... This guitar is still available,,, Next stop ebay... I don't have time right now, probably not until later this week, for those wanting more detailed pics.. I will try to get some up here by Fri or so. My camera is only fair at best, so I can't take Hi Res pics... This guitar is in very good playable condition, sounds wonderful and plays great.. It is not a collectors "museum grade" guitar.. Thats why its not 3k....
bullet_bob@lycos.com
bullet_bob@lycos.com
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time......
no gear list for me.. you don't have the time......
- Dave Mudgett
- Moderator
- Posts: 9648
- Joined: 16 Jul 2004 12:01 am
- Location: Central Pennsylvania and Gallatin, Tennessee
Bob - hopefully you got my email earlier. I can't believe this is still here. Anyway, I offered to buy the guitar. These are killer, and not that easy to find. Everything a Firebird oughta' be but isn't, to my tastes.
I've done business with Bob many times. If he says it is player-grade and straight except for a refin and pulled tailpiece, that's what it is.
I've done business with Bob many times. If he says it is player-grade and straight except for a refin and pulled tailpiece, that's what it is.
-
- Posts: 6965
- Joined: 26 Dec 2003 1:01 am
- Location: Candor, New York, USA
Sold. donation sent..
bob
bob
Last edited by Bob Carlucci on 9 Oct 2009 12:07 pm, edited 1 time in total.
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time......
no gear list for me.. you don't have the time......
-
- Posts: 506
- Joined: 21 Nov 2008 11:37 am
- Location: Texas, USA
-
- Posts: 60
- Joined: 30 Apr 2008 9:10 am
- Location: Colorado, USA
wilshire
i've got a '65, dine-o-mite:
here's 'nother edger winter wilshire cut"
http://www.youtube.com/watch?v=Eb8_UD-f ... re=related
here's 'nother edger winter wilshire cut"
http://www.youtube.com/watch?v=Eb8_UD-f ... re=related