Nashville 112 and Nashville 1000 kits (Burr Brown)

Jay Hudson · Post by **Jay Hudson** » 8 Jan 2008 11:18 am

Hey guys I'm confused.
Do new Nash 112's already have the Burr Brown's installed?
Also Ken please e-mail with the price.

Ken Fox · Post by **Ken Fox** » 15 Jan 2008 3:44 pm

They do not according to my last conversation with Peavey

I have another 100 in stock ready to ship!

Bruce Atkinson · Post by **Bruce Atkinson** » 16 Jan 2008 8:31 am

WOW!!!!

I got the chips Monday but it took until today to get the nerve to open up my NV1000. What a difference! The result is a MUCH warmer tone.

My only problem putting in the chips was I bent a couple of pins trying...fortunately, a needle nose pliers was all I needed to straighten them back out.

Many thanks again, Ken!

Ken Fox · Post by **Ken Fox** » 16 Jan 2008 8:56 am

I put the chip between my thumb and forefinger and squeeze a bit to get the legs a tad closer together. The legs are always wider apart than the socket.

Same with any new IC chip, the legs are always wider apart than the receiving socket

Chubby Howard · Post by **Chubby Howard** » 20 Jan 2008 8:13 pm

Need info on chips for nashville 112 and profex 2 thanks Chubby Howard

Ken Fox · Post by **Ken Fox** » 5 Feb 2008 3:33 pm

Out of chips at this time. I should have more this week.

Don Discher · Post by **Don Discher** » 7 Feb 2008 7:43 pm

Had mine put in today.Nash 112 and even I noticed a difference.My neighbor who is an electronics tech did the install in about a half hour for free.The 112 sounds good without it but the mod sweetens it up.
Thanks Ken.

Ken Fox · Post by **Ken Fox** » 7 Feb 2008 7:50 pm

Thanks again, Don. Glad to hear you like the kit.

I just got in another 100 today!

Ken Fox · Post by **Ken Fox** » 21 Mar 2008 6:04 am

Just got in another 100. Kits are ready to ship again!

Ken Fox · Post by **Ken Fox** » 6 Apr 2008 4:02 pm

bump. Got kits ready to ship!!

Larry Jamieson · Post by **Larry Jamieson** » 6 Apr 2008 6:22 pm

Hello Ken,
Please e-mail me the price for the mod kit for the Nashville 1000. Thanks

Larry J.

Ken Fox · Post by **Ken Fox** » 27 Apr 2008 6:02 pm

Gary Lynch · Post by **Gary Lynch** » 28 Apr 2008 9:41 am

Ken,

Do you have a web site that explains the mod, what to expect, how to do it and the price? I just bought a new NV 112.

Thanks

Ken Fox · Post by **Ken Fox** » 28 Apr 2008 9:58 am

I do not have a website. As this would be considered a new product I can't post a price on the Fourm (Forum rules).

All I can say is well over 200 N-112 amps have been modded with this mod and the comments have been very favorable.

I do not play a N-112 amp and cannot really give a detailed description of what it does. I far prefer a modded N-400 amp for steel guitar to anything else out there.

In the electronics section there had been much discussion on it.

Gary Lynch · Post by **Gary Lynch** » 28 Apr 2008 10:15 am

Thanks Ken

I am using a 5E3 Deluxe and a NV 112 together off a Hilton coming form an Aiello Frypan with huge pickup. So my setup is not traditional.

Jimmy Walls · Post by **Jimmy Walls** » 28 Apr 2008 11:24 pm

Hi Ken, you've got E-mail about the MOD kit for the N-112 and N-1000.

Ken Fox · Post by **Ken Fox** » 11 May 2008 3:58 am

Ken Fox · Post by **Ken Fox** » 25 May 2008 6:15 am

Bumper up! Got kits ready to ship. Also batteryless mod kits for Profex 2, etc with instructions.

Craig Showman · Post by **Craig Showman** » 29 May 2008 3:12 am

Ken please e-mail me price for 112 and profex2.
craigshowman@yahoo.com thanks

Ken Fox · Post by **Ken Fox** » 11 Jun 2008 3:57 am

Ken Fox · Post by **Ken Fox** » 18 Jun 2008 5:11 pm

Just a couple of kits left. I have another 250 chips ordered and will be making up kits ASAP.

Ken Fox · Post by **Ken Fox** » 23 Jun 2008 3:41 pm

Got the chips in and will get some kits made up tomorrow.

thanks!

Ken Fox · Post by **Ken Fox** » 26 Jun 2008 12:07 pm

Rick Hulett · Post by **Rick Hulett** » 26 Jun 2008 4:29 pm

Ken,

Can you e-mail the 112 price? Thanks.

Rick

Zsolt Kutasi · Post by **Zsolt Kutasi** » 28 Jun 2008 10:37 am

Hi Ken,
Please inform me, how can I get the mod kits for my N112, and S500. Also I have to buy a 230V tarnsfomator for my N112. Have you got an idea about it? The destination point is Budapest, Hungary. Thanks. Zs.

The Steel Guitar Forum

Nashville 112 and Nashville 1000 kits (Burr Brown)

chips

New order of 250 coming

mod kits