Sho-Bud Pedal

Fred Nelson · From: Black Oak, Ar

Trying to wire a shobud vol. pedal, would anyone please have a diagram?
Thanks a lot
fred

------------------

Chris DeBarge · From: Boston, Mass

No diagram, but it's pretty simple. On the pot you have 3 solder lugs. The + side of the input jack wire to the first lug, the + side of the output jack wire to the middle lug. Then connect the grounds of both jacks to the 3rd lug. If the pedal works backwards, just switch the 1st and 3rd lug.

BTW, the positive side of the jacks would be the springy thing that touches the tip of the plug. Hope this helps.

Forum Index > Electronics		Next oldest topic :: Next newest topic

All times are GMT - 8 Hours	Jump to: