Trying to wire a shobud vol. pedal, would anyone please have a diagram?
Thanks a lot
fred
------------------
Sho-Bud Pedal
Moderator: Shoshanah Marohn
-
Chris DeBarge
- Posts: 811
- Joined: 4 Aug 1998 11:00 pm
- Location: Boston, Mass
- Contact:
No diagram, but it's pretty simple. On the pot you have 3 solder lugs. The + side of the input jack wire to the first lug, the + side of the output jack wire to the middle lug. Then connect the grounds of both jacks to the 3rd lug. If the pedal works backwards, just switch the 1st and 3rd lug.
BTW, the positive side of the jacks would be the springy thing that touches the tip of the plug. Hope this helps.
BTW, the positive side of the jacks would be the springy thing that touches the tip of the plug. Hope this helps.