Page 1 of 1

Sesh 400

Posted: 16 Oct 2023 3:52 pm
by Danny Letz
I have a Sesh 400. To me it seems that no knob on it sets like anything I've ever had. It has been a heck of a learning curve but yet there is something about it I like. I am slowly closing in on the tone I want. I am using a Straight Ahead amp. My question is, do others of you have to set your Master at near 3 oclock to get enough volume at a gig? (the Straight Ahead power amp is all the way up).

wow

Posted: 16 Oct 2023 4:42 pm
by Steve Hinson
Something’s wrong!

That rig ought to be blowing the back wall outta
anyplace you play it-I can’t imagine…

I’ve literally run my Sesh 400 on zero and my TB 202 halfway up
and it was plenty loud…

Check cables,VP,speaker connections,etc.

Good luck!

SH

Posted: 16 Oct 2023 5:00 pm
by Len Amaral
Something is wrong with the hook up wiring as Steve mentioned. I have a Sesh 400 and a Straight Ahead power amp and there is plenty of power to spare.

Posted: 18 Oct 2023 5:28 pm
by Danny Letz
The problem may have been in the cords. Gonna do away with the 90 degree George L ends and check with an ohm meter more often. Seems good at home with gain at about 9 oclock. I'll find out Saturday when I play out again. Thanks

Posted: 24 Oct 2023 8:46 am
by George Biner
That is a 200W rms amp, that is a huge amount of power, as they said, just cracked it should be loud.

Posted: 25 Oct 2023 6:29 am
by Danny Letz
I ohmed the George L cords & cut & reinstalled the ends on some of them & got rid of some 90’s. That helped a bunch but I still ended up with the gain near 12 o’clock on the Sesh at a gig. I admit the stage volume is pretty high. At home around 8 or 9 o’clock is probably enough. May still have something wrong but it’s way better. Running a Matchbox 60 right out of the guitar, a Dd3 & a Wet Reverb ahead of Sesh, Straight Ahead power amp, 15” Eminence Neo speaker.

Posted: 26 Oct 2023 6:00 am
by Norman Evans
Try these settings. Keep the sensitivity about 9 1/2 to 10 and adjust master as needed.


Image

Posted: 26 Oct 2023 6:23 am
by Ron Hogan
Norman Evans wrote:Try these settings. Keep the sensitivity about 9 1/2 to 10 and adjust master as needed.


Image

I noticed your presence is about 2 o’clock. On mine I have treble and presence about 7 to 8 o’clock. Otherwise it’s piercing highs.

Posted: 26 Oct 2023 6:50 am
by Danny Letz
Thanks, I will try. Mr Hogan, your settings got me the closest to what I want. Will try both your suggestions.

Posted: 30 Oct 2023 7:33 am
by Danny Letz
I'm getting along pretty good with the Sesh. My gain is up around 12:00 though. That's pretty loud but we're playing some venues where we probably should be goin thru the PA.