WTB-- An electric guitar with floor pedals like on a PSG

Andy Eder · Post by **Andy Eder** » 17 Dec 2014 7:07 pm

I am very interested in acquiring a 6 string electric guitar with a pedal system similar to the one that Phil Baugh used to play.

I would prefer a Telecaster but would consider almost anything. If anyone has one or knows where I might be able to get one, please let me know.

Thanks,
Andy Eder

Andy Eder · Post by **Andy Eder** » 19 Dec 2014 5:55 pm

ttt
ttt

Bill Hatcher · Post by **Bill Hatcher** » 20 Dec 2014 1:38 pm

like this. i talked to phil before he passed. he was working on trying to get this unit built again. good luck finding one thats a decent price.

i have seen a very simple unit that was hooked up to a tele. cant remember who made it, but it was passable.

http://www.fretboardjournal.com/blog/ca ... attachment

Andy Eder · Post by **Andy Eder** » 20 Dec 2014 2:04 pm

Hi Bill,

It has been said that MSA built 25 more using Peavey guitars and they were locked up when MSA went into receivership never to be seen again from what I've found out so far.

I've been in touch with MSA and they said they didn't know anything about those other pedal guitars and could not help me with building one.

I have found a luthier who builds PSGs who asked me to send him pictures which you
just sent me.

Thank you,
Andy Eder

Ben Elder · Post by **Ben Elder** » 20 Dec 2014 11:44 pm

Email sent.

Bill Hatcher · Post by **Bill Hatcher** » 21 Dec 2014 7:22 am

Let us know what you end up with

Andy Eder · Post by **Andy Eder** » 21 Dec 2014 7:50 am

I certainly will.

Marty Broussard · Post by **Marty Broussard** » 21 Dec 2014 9:49 am

I have boxes full of parts and a special prototype guitar that I've been working on(as time permits) for a year now. I got some good info from Jim Flynn on cables.

Gary Reed · Post by **Gary Reed** » 21 Dec 2014 12:50 pm

MacKenzie String Puller? Arlen Roth
http://www.mitene.or.jp/~dolphy/Bender/MACK.HTM

Andy Eder · Post by **Andy Eder** » 21 Dec 2014 7:23 pm

Gary,

I saw that at Summer NAMM a long time ago and tried it standing up. I didn't like it because the pedals were very stiff but it never occurred to me to sit down. Those guys were from Scotland if I remember correctly and I think I called them a while after the show and they told me they hadn't done anything with it due to lack of interest.

I'll have to see if I can find them.

Thanks,
Andy

Andy Eder · Post by **Andy Eder** » 29 Dec 2014 7:49 am

TTT

TTT

TTT

Scott Appleton · Post by **Scott Appleton** » 3 Jan 2015 3:09 pm

I think that could be done simply with electronics and some servo motors .. similar to the auto tune on the Machine from Gibson .. I know a few people on the SGF have played around with servo motors to change tuning on a pedal steel .. something simpler with just a small cable from floor mounted POT's to control each servo motor .. some power routed from the floor pedal .. say a Midi cable to plug into the guitar similar to the Roland synth cable .. thoughts?

admin · Post by **b0b** » 7 May 2015 4:13 am

An argument was removed from this classified ad. $:\$

Andy Eder · Post by **Andy Eder** » 7 May 2015 6:40 am

b0b,

Thank you for overseeing the Forum.

Bottom line, I got the info I needed but not from the builder.

There is no approval when you buy a new instrument from him, if it doesn't work right, tough luck cause he won't take paypal or a credit card, or a return.

I'll wait for a professional quality pedal guitar which Jackson PSG is working on.

BTW, I never "ordered" a pedal guitar in any way from you know who, he just made one and expected me to buy it.

BTW, I will accept paypal.

Andy Eder · Post by **Andy Eder** » 7 May 2015 4:00 pm

CLOSE PLEASE

The Steel Guitar Forum