Gibson SG for Slide - Recommendations?

Bottleneck slide guitars, B-benders, etc.

Moderator: Dave Mudgett

Chris Bauer
Posts: 3067
Joined: 4 Aug 1998 11:00 pm
Location: Nashville, TN USA

Gibson SG for Slide - Recommendations?

Post by Chris Bauer »

I'm getting the itch after all these years to try an SG for slide parts and have exactly no experience with them. Given that there's a mile long list of models and options - and given that tone is a widely and wildly personal thing - who can give me some ideas of what to expect tonally from different models and pick-ups?

Even knowing that I'll ultimately need to just sit down with a raft of them and see which one(s) I like, I'd be interested in any recommendations you all might have in the meantime.

I'm looking for more of singing sound than crunch if that helps in any kinda way...
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

I like P-90s for slide. You might take a look at some Jrs too. I prefer them for slide. Just my opinion tho.
Tom Snook
Posts: 645
Joined: 8 May 2002 12:01 am
Location: Ft. Lauderdale, Florida, USA

Post by Tom Snook »

I bought an SG in 2009,traded it for a Les Paul in 2010.I couldn't get used to the longer neck.Go with a Les Paul IMHO.
I wanna go back to my little grass shack........
User avatar
Tom Pettingill
Posts: 2246
Joined: 23 Apr 2007 11:10 am
Location: California, USA (deceased)

Post by Tom Pettingill »

John Billings wrote:I like P-90s for slide. You might take a look at some Jrs too. I prefer them for slide. Just my opinion tho.
P90 Jr's are a blast :D
Dean Parks
Posts: 579
Joined: 9 Jul 2004 12:01 am
Location: Sherman Oaks, California, USA

Post by Dean Parks »

Duane Almond and Derek Trucks have had good luck with an SG, front pickup with Derek. Humbuckers.
User avatar
Stephen Cowell
Posts: 2875
Joined: 6 Jan 2012 8:13 am
Location: Round Rock, Texas, USA

Post by Stephen Cowell »

I use a P100 on my '61 SG Jr... I need the noise immunity a humbucker gives; you'll find that if you use drive/gain you need less noise.

I converted it from dog-ear to soap-bar, not that hard to do... gives you much more output when the pickup is close to the strings. It makes a great slide guitar... just don't let it fall over!
New FB Page: Lap Steel Licks And Stuff: https://www.facebook.com/groups/195394851800329
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

" just don't let it fall over!"

And that is an important point. SGs are quite fragile. I know, I have an early one.
User avatar
Steve Lipsey
Posts: 1900
Joined: 9 May 2011 8:51 pm
Location: Portland, Oregon, USA
Contact:

Post by Steve Lipsey »

look in the want ads on the forum

http://bb.steelguitarforum.com/viewtopic.php?t=251983

the faded models are great - sound fine, look great, and cost a lot less than the regular finish...
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham "CooderNator" archtop parlor electric reso w/Fishman & Lollar string-through
Ben Bonham "ResoBorn" deep parlor acoustic reso with Weissenborn neck and Fishman
Ben Bonham Style 3 Tricone., 1954 Oahu Diana, 1936 Oahu Parlor Squareneck
Kurt Kowalski
Posts: 558
Joined: 11 Aug 1998 12:01 am
Location: Kendall, NY USA

Post by Kurt Kowalski »

Hey Brother Chris,

Try this out... for the price, ya cant go wrong experimenting, and it is short scale.

http://www.musiciansfriend.com/guitars/ ... ric-guitar

my best,
-kk-
Steve Hinson
Posts: 3879
Joined: 4 Aug 1998 11:00 pm
Location: Hendersonville Tn USA

Post by Steve Hinson »

I use an SG/LP '61 reissue every day,Chris...the best slide tone I've ever gotten...you need the humbuckers to play slide because of the gain you gotta have...I used a Nobels ODR-S pedal for years,but they are really cheaply made and sometimes refused to work at all...I noticed that all the guitar players I was working with every day had OCD pedals...so that's what I'm using...much better!

I have the bridge jacked up on mine as high as it will go(leaning a little bit)...

I opened the gig bag one day and the headstock was just about broken off...Joe Glaser glued it back together for me and so far it's been fine...

I got this guitar in 1999...Randy Travis had a single out with a slide solo and we were going to NYC to do Letterman...a call was made from the office and I went to the back gate at Gibson and picked it up(?)...

I've never changed the strings until they broke...the top two are the ones that came on it...they are getting pretty shiny...
Steve Hinson
Posts: 3879
Joined: 4 Aug 1998 11:00 pm
Location: Hendersonville Tn USA

Post by Steve Hinson »

Oh yeah,the tuning keys are terrible...I've had to replace 3 or 4 of them...

I use a Coricidin bottle,the fake ones...I had a real one but I don't know what went with it...

I'm gonna change the tailpiece on it to a lightweight aluminum one...I really like the sound of those,and I've changed all my Les Pauls to them...they
weigh a lot less than the zinc ones they went to in the Seventies...
User avatar
David Mason
Posts: 6072
Joined: 6 Oct 2001 12:01 am
Location: Cambridge, MD, USA

Post by David Mason »

"Duane Almond?"
How nutty... :lol:
I was on a serious Allman disciple trip for a while there, 14 to 19 years old or so. I used to wear a Coricidin bottle to high school (and nobody laughed, there was a group who could sing Duane's solos off "Live at the Fillmore.")

I eventually ended up with the "right" 50-watt no-master volume Marshall head, a "pretty close" 1968 SG, some pretty close JBL speakers (Duane used Altec-Lansing). And for some reason, not only did I not sound like Duane Allman, I didn't even sound good to me. In a long process, I discovered that I needed a much brighter start to my chain in order to come out with a tone in that rounded-Duane vicinity. Brass slide, single coil neck pickup.

In order of importance, I think you need hi-fi speakers, not distorted "guitar speakers" like Celestions. Like JBL's, Altec-Lansing, Eminence "PA" speakers, or Black Widows are fine; a really cranked power amp section of the Marshall variety, with EL34 tubes, and a minimally-cranked preamp section. That saxophone/harmonica tone is ALL power tubes, and it may be easier to get with a Duncan Twin-Tube pedal or some of the other myriad devices. And then I'd say a slide light enough to play with some nuance, fairly light strings, and a guitar with a strong midrange and bass output, at least with the provision to roll off a lot of highs.

The Allman Brothers were Duane's band from day one, and their songs and music were specifically built to compliment what he was doing. This may be the most important of all. The majority of modern slide played by non-specialists is played with much more high-end preamp distortion, to "cut through the mix" generated by backing musicians who are also trying to generate excitement with their tone. NO-body wants to be the mix.... :cry:

If you want to hear a masterful job of "arranging for slide guitar", Sonny Landreth's "Elemental Journey" is one of the best I've ever heard. This Kevin Breit guy out of Canada is amazing:
http://www.youtube.com/watch?v=3RG-QjAm ... Ga&index=6
He's been playing in the same band at the same bar for 14 years... And Derek Trucks has been killing it the past few years - standing on a stage next to Warren Haynes, knowing your slot is coming up...
you don't dare cover this song without the cojones to back it up:
http://www.youtube.com/watch?v=RZYM7ipgVlE
Steve Hinson
Posts: 3879
Joined: 4 Aug 1998 11:00 pm
Location: Hendersonville Tn USA

Post by Steve Hinson »

Duane didn't start using the SG till later on in his career...I think he traded Dickey a Strat or something for it...his most famous slide work was done on Les Pauls...the cherry sunburst one he used on the Fillmore album,and the goldtop he played on the"Layla"album...
Chris Bauer
Posts: 3067
Joined: 4 Aug 1998 11:00 pm
Location: Nashville, TN USA

Post by Chris Bauer »

Thanks all. Keep 'em comin'!

Among the things I'm interested to hear is the comment about lighter strings. I'd have thought that the heaviest strings the guitar can take without bending the neck in two would be the ticket for both meaty tone and sustain.

Steve - sounds like you change strings on your SG the way I change them on my steels... ;)
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

I used 11s on my Tele. 15's on my National archtops that I use for dedicated bottleneck. I play fingers and slide. My personal opinion is that there are a lot of better guitars for slide than an SG.
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

rock out chris! you get yerself good enough on that thing and you can audition for my band, 'Old Men in Baggy Spandex!'
Steve Hinson
Posts: 3879
Joined: 4 Aug 1998 11:00 pm
Location: Hendersonville Tn USA

Post by Steve Hinson »

Chris,I don't KNOW what gauges are on my SG...whenever one breaks,I get whatever looks right out of my session bag and put it on there...
Steve Hinson
Posts: 3879
Joined: 4 Aug 1998 11:00 pm
Location: Hendersonville Tn USA

Post by Steve Hinson »

As far as"a lot better guitars for slide than an SG"...the three guys I try to sound like all played them...Duane Allman,Gary Rossington,and George Harrison...good enough for them,good enough for me...not to mention the Badfinger guys,Sonny Landreth,and Derek Trucks...
User avatar
Stephen Cowell
Posts: 2875
Joined: 6 Jan 2012 8:13 am
Location: Round Rock, Texas, USA

Post by Stephen Cowell »

I use 11's on my '61... and I've never changed them that I can recall. Something about slide and new strings just don't get along... it had Grovers when I got it, btw, and the frets are very flat, another plus. SG's with neck pickups are more fragile, so Jr's are best for stability, really... a full-on SG has a built-in vibrato bar, known as the neck.

I use a bottle neck with some radius to it... flat slides leave me cold. Mr. B makes a good slide... I found another cheaper brand, but they started leaving the end of the bottle on there, not good. Broke my favorite one... a blue Mr. B (he won't do blue anymore)... that hurt.

http://mrbsguitarslides.com/shop/

I'm using a Brian May Special Vox practice amp modeled after his Rangemaster/car radio setup... it's kinda grindy, but for cheap transistor practice it's the best I've found. I don't like my FT '69 for this... I'll probably get one of those OCD's as Steve recommended. I don't have the Fillmore to practice in, so Superleads with Altecs (open back!) is right out... but slide without lots of hook-up just doesn't work, you'll need a good box on the floor.
New FB Page: Lap Steel Licks And Stuff: https://www.facebook.com/groups/195394851800329
User avatar
Dave Mudgett
Moderator
Posts: 9648
Joined: 16 Jul 2004 12:01 am
Location: Central Pennsylvania and Gallatin, Tennessee

Post by Dave Mudgett »

I don't get to play a lot of slide these days, but did for a long time. I like an SG fine for slide, but probably prefer a Gold Top Les Paul or Les Paul Special with P90s. I love Juniors, but if you're going for a Duane or Derek Trucks vibe, I think two pickups are important.

For an SG, I'd get the heaviest, most stable, and most traditional SG without any type of vibrato arm on it - just a tune-a-matic, or even better yet, a wraparound bridge. Big, fat neck, heaviest, most stable SG body I can find. I had a '63 SG Standard for years - but like the bonehead that I sometimes am, I sold it 15-20 years ago. Best SG I've ever had in my hands, but they're crazy expensive now. The '61 Reissue SG Standard is good - really, any of the more traditionally-made SGs are fine by me. Standard, Special, whatever I can find reasonable that meets those specs. I picked up an SG Special (gloss top w/ humbuckers) with the large (66-69) pickguard and 490 pickups from a big-box store very reasonable (I mean cheap) earlier this year. The 490 (Alnico II) humbuckers are a bit scooped for me, but still sound good. If I was really gonna tweak it, I'd put in the '57 Classics. The neck is pretty fat, the guitar is stable, and it sounds and plays good. I think that particular model is now out-of-production, but they can be had pretty reasonable used. I prefer these over the faded SG Specials, and I got mine in that same price range.

Again, I really like P90s. But for humbuckers, unless I could find a nice vintage 'player-grade' SG or, let's say, some old patent number pickups, I'd get the '57 Classic humbuckers for a new Gibson humbucker. I've tried lots of different humbuckers, and they're really, to my ears, the most like the old ones of any modern Gibson humbuckers I've tried. Of course, guys like Lindy Fralin and many others wind a good PAF-style pickup, you can go crazy fooling around with pickups.

I don't usually use much gain, but just use an amp small enough that I can just crank it up, maybe with a little overdrive if needed. Tweed Deluxe or something like that, unless it's gonna really be loud, in which case perhaps a tweed Bassman. I just picked up a used THD BiValve, pretty nice for slide. The THD Flexi 50 with a pair of EL-34s is pretty nice too - of course, a 50-watt Plexi or JMP Marshall is great too, but louder than I can deal with these days. One of the 18-watt Marshalls is great, and the volume is workable. I have a couple of different Duncan Twin Tube pedals if I need to get more gain in the front end, let's say to play through a silverface Fender.

I use fairly heavy strings for slide, another reason I really need a stable guitar - a light-duty SG with a pencil neck and questionable neck joint can really be problematic with heavier strings. I use at least 11-48 for Open E, or maybe 12-52. I'd use 12-52 or 13-56 if I'm using a lower tuning like Open D. The heavier strings let me set the action a bit lower than I otherwise might - I like to be able to set it just low enough to fret with my fingers. I generally prefer pure nickel-wrap strings for slide, and usually turn the tone control down some. Those pure nickel-wraps just sound sweeter to me - don't really care for them for standard guitar applications except archtop, but I find they fatten up the sound for slide. Ernie Ball makes 11-48 Power Slinkies in pure nickel wrap, but I usually wind up with John Pearse Acoustic-Electric pure nickel wraps for 12-52 or 13-56.

Probably more than you wanted to hear, but just another guy's take. Good luck.
Chris Bauer
Posts: 3067
Joined: 4 Aug 1998 11:00 pm
Location: Nashville, TN USA

Post by Chris Bauer »

Duplicate post. Sorry about that!
Last edited by Chris Bauer on 9 Sep 2013 4:50 pm, edited 1 time in total.
Chris Bauer
Posts: 3067
Joined: 4 Aug 1998 11:00 pm
Location: Nashville, TN USA

Post by Chris Bauer »

All I can say is keep on keepin' 'em comin'. I appreciate all the input.

Since I'm already inviting every manner of argument anyhow, anyone else have amp recommendations along with more SG lore?

I'm flooded with OD pedals but haven't actually used the OCD despite all the raves I keep hearing about it. Might need to break down and finally put it on the wishlist.
James Nottage
Posts: 176
Joined: 31 Aug 2010 5:37 pm
Location: Indiana, USA

Post by James Nottage »

So, here it is, Duane Allman's SG. We just had it on exhibit at the Eiteljorg Museum in Indianapolis. Loaned by the owner, Graham Nash, a birday present from his wife. It is now back at the Rock and Roll Hall of Fame. Took this picture during the exhibit. You can hear Dicky Betts talking about it here:

http://www2.gibson.com/News-Lifestyle/F ... .jpg[/img]
Clinesmith S-8; Pettingill P6; Rick-Style Vintage 47 Amp
User avatar
Jeff Garden
Posts: 3645
Joined: 21 Aug 2003 12:01 am
Location: Center Sandwich, New Hampshire, USA

Post by Jeff Garden »

Gibson solid bodies and Marshalls always seemed like a perfect match to me. I had a Les Paul back in the 70's and it was just too darn heavy (so was the Marshall stack!) - switched to an SG which didn't seem to sacrifice a whole lot of tone for a much lighter body. I still have a newer SG (1980's) paired with a Marshall 50w JCM 900 (2 celestion 12's) which seems to get the job done. And much like David Mason's post, back in the Allman Brothers years, I spent hours and hours with my turntable on half-speed trying to figure out Duane and Dicky Betts' leads on Live at the Fillmore and Eat a Peach. Still probably my all time favorite band...nothing like the Brothers kicking off a hot summer nite outdoors with Statesboro Blues :)
Chris Bauer
Posts: 3067
Joined: 4 Aug 1998 11:00 pm
Location: Nashville, TN USA

Post by Chris Bauer »

Okay - another SG novice question... Since there seem to be a zillion or so models and changes over the years, if looking for "the heaviest, most stable" models, which would those be?
Post Reply