Mullen Electronic Volume Pedals

Amplifiers, effects, recording equipment, seats, racks, parts, or anything else.
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Electronic Volume Pedals

Post by Herby Wallace »

This new pedal is without a doubt, the finest I have ever used and is unbelieveable. It only took me about 15 minutes to make up my mind. It is higher priced than other pedals, but believe me, it's in a class by itself and worth every penny. I am selling these through HWP. If you would like to order one, the price is $489.00 plus $16.00 shipping and handling.

Herby Wallace
865/453-2973 or
email HWallac480@aol.com
Last edited by Herby Wallace on 16 Sep 2009 1:41 pm, edited 1 time in total.
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedals

Post by Herby Wallace »

Bump
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedals

Post by Herby Wallace »

Unbelieveable! Every time I use it, I am more impressed. Get yours now.

Herby Wallace
865/453-2973 or
email HWallac480@aol.com
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedals

Post by Herby Wallace »

In stock, ready to ship.

Herby Wallace
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen VP

Post by Herby Wallace »

Bump
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen VP

Post by Herby Wallace »

Bump
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedal

Post by Herby Wallace »

Bump
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedals

Post by Herby Wallace »

Bump
Terry Kinnear
Posts: 534
Joined: 17 Mar 2007 8:31 am
Location: Erie ,Pennsylvania

Post by Terry Kinnear »

whats the differance,from the hilton ?
Terry Kinnear [ steel wondering]
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedals

Post by Herby Wallace »

Still the finest I have ever used and unbelieveable.

Herby Wallace
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

what's the difference between this and what i can afford?
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedal

Post by Herby Wallace »

First, I am not an electronics expert by any means, but as I said this pedal, for my taste, is the finest I have ever used. It has a much cleaner tone, smoother action plus it has several settings for different tapers that regular pedals do not have. It has several different adjustments for cut off point, drag and so on. Now, I have nothing against other pedals on the market that are lower priced, but to me, this pedal is a notch above. I have always felt that every component in your chain has a bearing on the end result. You can have the best steel or amp on the market for example and lose your sound in the cable. Well, as to this volume pedal, I have personally compared it to the other popular brands which are less expensive, but I do hear a difference in the tone, not to mention all the other features it has.

Herby Wallace
Danny Bates
Posts: 1723
Joined: 5 Jan 2001 1:01 am
Location: Fresno, CA. USA

Post by Danny Bates »

I agree with Herby. These sound great. Plus they have a place where you can adjust your pickups impedance, a tuner output that has signal even if your volume is backed off all the way, an adjustment for minimum volume and a cool little light that shoots across your pedals.

The main thing is that the tone is so full and the pedal is instantly adjustable. The adjustments are like having a pot pedal and switching between a 250k pot, a 350k pot a 500k pot or a 1 meg pot. For example, the 250k would be an even sweep where the 1 meg would be more sensitive near the full volume position and turn up or down with less movement.

Terry, I had a Hilton and I sold it to go back to a pot pedal years ago. I haven't tried the latest version. I also have 2 Goodrich's and a Sho-Bud. (that's $500 right there!) My Hilton sounded a little thin and bright for my taste. The Hilton is probably just what the doctor ordered for some guitars. Since I have an Emmons push/pull and an Evans amp, I don't need bright.

If I had to describe the tone, I would say, it's full and clean with a flat frequency response. Like a pot pedal with a super clean preamp in front of it so that doesn't suck any highs when you back off the pedal. I hope this isn't confusing. Basically, it's pricey but a great thing to have. You can see the quality as soon as you open the box. I don't know if it was a mistake but they gave me 2 power supplies. Nice small power supplies... the kind that don't suck up 2 spaces on your power strip. :)

Mine is the low profile version and it's super low.
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedals

Post by Herby Wallace »

Unbelieveable and in stock ready to ship.

Herby Wallace
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen VP

Post by Herby Wallace »

The best yet!
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen VP

Post by Herby Wallace »

Still The Best
Hal Higgins
Posts: 1990
Joined: 6 Jul 2001 12:01 am
Location: Denham Springs, LA

Post by Hal Higgins »

Herby....would like the opportunity to try one of these pedals out.....don't know of anyone around here who has one.....I don't think Buck does. I was at his house a week or so ago, and he didn't mention to me that he had one....I know he has a new G2. They are a bit pricey as has been mentioned, but I'm sure there must be something to it if you are an endorser. Hope I get to try one before long. I really do like my Hilton that I got from you some time back.......Keep in touch. HAL
HAL...Excel D-10 w/ 8 & 5. SteelSeat.com w/back,SteelSeat.com Pedal Board on Legs with Quilter Tone Block 200 amp, Boss GE 7, Boss DD 3, Boss RV 6, Boss RT-20 Hilton Expression Pedal, Evans Cabinet with 4 ohm Eminence 15" speaker. BJS birthstone bar, Powder coated Tone bar by Michael Hillman. Dunlop Coated finger picks and Zookies L30 thumb picks.
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen VP

Post by Herby Wallace »

Bump
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen VP

Post by Herby Wallace »

In stock and ready to go.

Herby Wallace
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen VP

Post by Herby Wallace »

Bump
Robert Bird
Posts: 44
Joined: 6 Dec 2005 1:01 am
Location: New York, USA

Mullen Volume Pedal

Post by Robert Bird »

I just got my mullen pedel at the steel show in Conn. from Herby after he was done playing. I thought I was nuts for paying so much for a pedal because I had a Hilten. Then after I got home, I played it. Wow! What a difference! It's great. Anybody want a Hilton? Robert Bird
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen Pedals

Post by Herby Wallace »

Unbelieveable!
User avatar
john widgren
Posts: 2623
Joined: 24 Nov 1998 1:01 am
Location: Wilton CT

Vp

Post by john widgren »

Bump for Herby..

This pedal is awesome.
Steel Guitar Services:
Live performance and recording. Instruments, repairs and lessons. Fresh bait/discount sushi.
(203) 858-8498
widcj@hotmail.com
User avatar
Herby Wallace
Posts: 3204
Joined: 4 Aug 1998 11:00 pm
Location: Sevierville, TN, R.I.P.
Contact:

Mullen VP

Post by Herby Wallace »

Bump
User avatar
Eric Philippsen
Posts: 1966
Joined: 14 Jan 2008 5:38 pm
Location: Central Indiana, USA

Post by Eric Philippsen »

I have one of these pedals that I bought at St. Louis this year.

Speaking for myself, I am tremendously pleased with it. I don't want to use any other pedal.

It costs a lot, plain and simple. I paid for it by selling music stuff that had been lying around unused for years.

Those of you who are understandably skeptical - I'd just suggest holding judgement until you can try one.
Post Reply