| Author |
Topic: The restoration of a 1980's MSA D10 |
Mathias Lundqvist
From:
Sweden
|
Posted 21 Nov 2007 12:50 am |
|
A few pics of my latest restoration. I bought it really cheap since the former owner had gotten tired of the fact that the strings never returned to the right pitch after engaging pedals. I soon found out why - EVERYTING was binding up in that guitar! So I took it completely apart and the rest you'll see in the pictures 
BEFORE:
DURING:
AFTER:
 |
|
|
|
B. Greg Jones
From:
Middleport, Ohio USA
|
Posted 21 Nov 2007 7:24 am
|
|
Wow!!! Very nicely done!!!! Looks great and I'll bet plays like a dream too!!!
Greg |
|
|
|
Darvin Willhoite
From:
Roxton, Tx. USA
|
Posted 21 Nov 2007 7:55 am
|
|
Man that is a work of art. I assume that is a Classic SS, which is a great guitar if everything is setup right. The gold color is a nice touch, I've never seen a steel this color. The flocking underneath looks really neat too. GREAT JOB.
_________________
Darvin Willhoite
MSA Millennium, Legend, and Studio Pro, Reese's restored Universal Direction guitar, a restored MSA Classic SS, several amps, new and old, and a Kemper Powerhead that I am really liking. Also a Zum D10, a Mullen RP, and a restored Rose S10, named the "Blue Bird". Also, I have acquired and restored the plexiglass D10 MSA Classic that was built as a demo in the early '70s. I also have a '74 lacquer P/P, with wood necks, and a showroom condition Sho-Bud Super Pro. |
|
|
|
Carlos Polidura
From:
Puerto Rico
|
Posted 21 Nov 2007 7:59 am
|
|
A job well done Mathias.
That is a very preaty guitar. Hope you enjoy it for a very long time.
Carlos  |
|
|
|
Steve English
From:
Baja, Arizona
|
Posted 21 Nov 2007 8:18 am
|
|
Mathias, you must be very proud. That is beautiful workmanship!
_________________
Always remember you're unique..... Just like everyone else |
|
|
|
A. J. Schobert
From:
Cincinnati, Ohio,
|
Posted 21 Nov 2007 8:22 am
|
|
| Did you have an autobody shop paint your guitar? |
|
|
|
Mike Perlowin
From:
Los Angeles CA
|
|
|
|
Greg Cutshaw
From:
Corry, PA, USA
|
Posted 21 Nov 2007 10:28 am
|
|
What a great looking guitar! I too would like to know how the gold color was applied!
Greg |
|
|
|
Mathias Lundqvist
From:
Sweden
|
Posted 21 Nov 2007 11:35 am
|
|
Thanks guys for really nice and kind comments!
Darvin, yes it's a SS, 80-something. I think I've gotten the setup pretty good cause it plays and sounds great!! Your amazingly good lookin SS was a big inspiration during my work, although they have very diffrent looks. Mine was also red from the factory.
A.J and Greg, yes the paint is automotive lacquer and I had it sprayed by the same guy who paint my vintage cars. I did the undercoating with autopaint undercoat in two layers, then he sprayed base and clearcoat at the shop. Turned out great!
Mike, sharp observation. Sadly I don't know who's made the necks and fretboard, they sat there when I bought the guitar. They have no logo or markings what so ever but they both look like they're made by a professional. They are bolted on with milimeter screws so they are either european made or retaped with milimeter thread when installed.
I was because of the aluminium necks I allowed my self to do a custom paintjob and flocking on this guitar. If it had the original necks I would probably have restored it true to original specs. |
|
|
|
Larry Jamieson
From:
Walton, NY USA
|
Posted 22 Nov 2007 7:18 am
|
|
Sweet! What a nice job you did on that guitar. I bet it plays great and sounds good now. Enjoy it!
Larry Jamieson |
|
|
|
Bill Hatcher
From:
Atlanta Ga. USA
|
Posted 22 Nov 2007 9:16 am
|
|
Nice!!!!
The gold color is really a nice touch. |
|
|
|
Gary Shepherd
From:
Fox, Oklahoma, USA
|
Posted 22 Nov 2007 1:18 pm
|
|
In your plastic parts box picture, in the bottom row and 4th column there are brass bushings with set screws. Did you make those or can they be bought somewhere?
Very nice work on everything. Why didn't you go with square crossbars?
_________________
Gary Shepherd
Carter D-10 & Peavey Nashville 1000
www.16tracks.com |
|
|
|
Mathias Lundqvist
From:
Sweden
|
Posted 22 Nov 2007 1:45 pm
|
|
Thanks Larry and Bill for your comments! And yes, it plays GREAT!
Gary, the brass bushings are the originals only polished. They can be bought from Wayne Link at Linkon pedal steels in Canada and probably from a couple of other places. But they are very easy to make. In Sweden we only have 6 mm brass rods which is a little less in diameter than the original inchmeasures but it works good. I made a couple of extras for a MSA S10 i restored a year ago.
I went with round crossbars since they are the originals. To go with squares I would have had to get new bellcranks and that would have been pretty expensive since I haven't got a milling machine. Also, there is no need to modify the mechanics of old MSAs, they do there job any way!! |
|
|
|
Alan Brookes
From:
Brummy living in Southern California
|
Posted 3 Feb 2008 4:21 pm
|
|
| A great job, Mathias, and the change of color is a big improvement. |
|
|
|
Bobbe Seymour
From:
Hendersonville TN USA, R.I.P.
|
Posted 3 Feb 2008 5:39 pm
|
|
I see a steel guitar club in the northern US is giving away a new MSA D-10 as a second prize in a up coming steel guitar show!
Bobbe |
|
|
|
Joel Meredith
From:
Portland,Oregon, USA
|
Posted 3 Feb 2008 8:22 pm
|
|
| It's beautiful in the foliage. |
|
|
|
Micky Byrne
From:
United Kingdom (deceased)
|
Posted 4 Feb 2008 2:06 pm
|
|
I agree with the others that the gold is a nice touch. I like things just that little bit different!! .....good looking axe.
Micky Byrne United kingdom |
|
|
|
Ricky Newman
From:
Ontario, Canada
|
Posted 4 Feb 2008 2:14 pm
|
|
wow wow wow  Beautiful Job. |
|
|
|
John Roche
From:
England
|
Posted 4 Feb 2008 2:33 pm
|
|
| You have done one great job on that guitar. you should do it for a living...John |
|
|
|
David LeBlanc
From:
New Brunswick, Canada
|
Posted 4 Feb 2008 4:35 pm
|
|
| You`ve givin me hope. I`m in the prosess of re-rodding mine. You did a great job. |
|
|
|
