Bmi s-10 c pedal need help

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Jim Williams
Posts: 1011
Joined: 17 Mar 2013 9:06 am
Location: Meridian, Mississippi, USA - Home of Peavey!

Post by Jim Williams »

This was a fine old guitar, but it had a LOT of playing time on it.
GFI SM10 3/4, 1937 Gibson EH-150, 2 - Rondo SX Lap Steels and a Guyatone 6 String C6. Peavey 400 and a Roland 40 Amps. Behringer Reverb Pedal.
User avatar
Lee Baucum
Posts: 10326
Joined: 11 Apr 1999 12:01 am
Location: McAllen, Texas (Extreme South) The Final Frontier

Post by Lee Baucum »

I'm curious to know if this issue was ever resolved.
Lee, from South Texas - Down On The Rio Grande

There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.


Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
User avatar
Jerry Roller
Posts: 10319
Joined: 17 Apr 1999 12:01 am
Location: Van Buren, Arkansas USA
Contact:

Post by Jerry Roller »

It might be that the 4th string changer is gummed up and not being allowed to pivot and could be dragging the lowering finger with the raise. I would suggest observe the changer fingers and see if only the raise finger is moving away from the stop. If both are moving forward I would remove the string and the lower return spring and manually move the raise finger while holding the lowering finger back and see if it works freely, if not, you might be able to try to free it up either by cleaning or perhaps just with oil and work it back and forth until it is freed up. You should consider all the other suggestions but if they fail it would not hurt to try this one.
Jerry
Chris McGinnis
Posts: 31
Joined: 1 Jun 2017 7:31 am
Location: Mooresburg Tennessee, USA

Post by Chris McGinnis »

Hey guys sorry didn't mean to seem like I was ditching the thread I have just had some personal things going on the past few weeks and couldn't get back to the bmi I will try seeing if the spring still might need to be shortened some and go from there will also trying some light oil on the changer.all the metal spacers that go between the tuning but and finger are still in place.will be sure to let everyone know how this comes out.will try to get back to it tomorrow and post the results.thanks again for all the suggestions.chris
Jim Palenscar
Posts: 5857
Joined: 4 Aug 1998 11:00 pm
Location: Oceanside, Calif, USA
Contact:

Post by Jim Palenscar »

One more thing- I've had those spacers freeze up on the pull rods and that can cause some headaches trying to figure it out- solved by removing them and cleaning~
User avatar
Jon Light
Posts: 13745
Joined: 4 Aug 1998 11:00 pm
Location: Saugerties, NY
Contact:

Post by Jon Light »

Glad you checked in, Chris.
There's lots of good info here. Most of us could nail it down pretty quickly if we had the guitar here in front of us. Hands-on, diagnosis is rarely terribly elusive. It is more often than not something fundamental and fairly easy to remedy.
Post Reply