Rittenberry Steel...show us your Ritt!

Brandon Ordoyne · Post by **Brandon Ordoyne** » 24 Jun 2009 10:04 am

has to be more Ritt's out there! Bump for a great guitar and builder!

Brandon

Bill Dobkins · Post by **Bill Dobkins** » 24 Jun 2009 5:56 pm

Gee, Am I the only one that likes white fret boards.

Jim Simon · Post by **Jim Simon** » 25 Jun 2009 9:53 am

Dennis:

If you do have another Teal Emerald Green done by Gary you had better give bOb a heads up. If you post a For Sale of that black beauty of yours his server will be overloaded instantly. I love the Teal and the great combinations shown but the black Ritt is special.

Jim

Brandon Ordoyne · Post by **Brandon Ordoyne** » 27 Jun 2009 4:23 pm

Bill...the white fretbords with the red and black is AwEsOmE! A little note, your guitar and mine were traveling partners! They rode from Gary's house to Dallas together! It's a sweet guitar!

Here's a shot of Jody Cameron's boot in Dallas this past year! Mine is behind the booth under the sheet

Bill Dobkins · Post by **Bill Dobkins** » 27 Jun 2009 8:26 pm

Thanks Brandon,I knew our steels were traveling brothers. The more i play mine the more i like it and the better it sounds. I hope we get to meet someday.
BD

Steve English · Post by **Steve English** » 10 Jul 2009 9:19 am

Add me to the list! I just bought this one:

had to......

Dennis Lee · Post by **Dennis Lee** » 10 Jul 2009 9:40 am

Congratulations Steve!

You won't be disappointed, I guarantee. Great looking guitar by a great craftsman! Welcome to the club.

Terry Sneed · Post by **Terry Sneed** » 10 Jul 2009 4:07 pm

Does Gary have a website that shows the different colors of steels he makes?
About how much would one cost like Bill Dobkins has, with the red and black sunburst? Just 3x5 polished?

Terry

Dennis Lee · Post by **Dennis Lee** » 10 Jul 2009 4:32 pm

Check out Bobbe Seymour's store page, he has a Ritt or two on there. Plan on about $2,600. I'm sure Gary could build you any color or combination of guitar you want. Get ahold of him. Tell him what you want, I know he can make it happen.

Terry Sneed · Post by **Terry Sneed** » 10 Jul 2009 8:00 pm

Yea Dennis I did check out Bobbe's Rittenberry line of steels. Is that where you got the sunburst? He mentioned it in his news letter yesterday. I kinda like the red and black one he's got. I'm just not decided I want to give up my D-10 just yet. but with my back getting worse all the time, it probly want be long before I have to go to an SD-10. I know the carters and the GFI's are lighter guitars, but I don't know about the Rittenberrys'. I think I'll email Gary and ask him what they weigh. Would you happen to know what your's weighs?
Terry

Dennis Lee · Post by **Dennis Lee** » 10 Jul 2009 8:22 pm

Hi Terry,

I don't know what my SD-10 weighs off-hand, but Gary or Bobbe could tell you. Actually, my guitar is black mica, though I can easily appreciate everyone's Rittenberry, since they're all a work of art when he completes them. My guitar isn't a boat anchor. I can easily move it around, and most of the time I take it to gigs without breaking it down and putting it in the great case that came with it. Just local gigs for me. I can appreciate a lot of good guitars, but for me, the tone, touch and finish of the Rittenberry is exceptional.

Bill Dobkins · Post by **Bill Dobkins** » 10 Jul 2009 9:55 pm

Hey Terry, My Ritt weighs 33lbs, but I have Aluminum legs.BD

Bill Dobkins · Post by **Bill Dobkins** » 10 Jul 2009 10:01 pm

Congrats Steve, I know that photo don't do your guitar justice. It sure is purty,,,,Enjoy and welcome to the Ritt family.
BD

Bryan Rankins · Post by **Bryan Rankins** » 15 Jul 2009 3:49 pm

Ok guys, you can welcome me to the Rittenberry Owner's Club. Wow, what a great steel. A big thanks to Dan at Steel Guitar Nashville for setting up (and resetting up) so many steels for me to compare. And a big thanks to my wonderful wife for this nice little present. I recently had a surgery that will keep me away from the D10 for awhile, and I'll just have to settle on playing this amazing little steel. Thanks to all (especially Bill Dobkins) for the passing on just how great these things are. Congrats Steve. I saw your new guitar hiding there. The pictures do not even come close to showing the beauty of that guitar. You'll be very happy. And now for a few pictures from the hotel room...

Bill Dobkins · Post by **Bill Dobkins** » 15 Jul 2009 8:02 pm

Hey Bryan, I told you so

Welcome to the club buddy.
Call me when you get home, I'd like to get some pix of our Ritts together. If you think it plays good now wait till it get broke in.
BD

Steve English · Post by **Steve English** » 16 Jul 2009 7:16 am

Bryan,

Beautiful guitar!! Congratulations!!

I can't wait for mine to arrive. Thanks for the comments on mine.

The folks at Steel Guitar Nashville are probably as thankful for our wives as we are!

You must have a good one too!!

Patiently waiting..........

Dennis Lee · Post by **Dennis Lee** » 16 Jul 2009 2:51 pm

She's a beauty, Bryan! You really can't describe the craftsmanship, tone and playability of Gary's creation. It's just one of those things that has to be experienced first-hand. I think you made a wise decision on a guitar.

Bill Dobkins · Post by **Bill Dobkins** » 17 Jul 2009 8:26 pm

Steve, Yours will be L3. Gary has L1 and I have L2.
We should have a Rittenberry Party someday.
I haven't been invited to play but Gary and I are planning on being at Baxter Springs in Oct, along with Jody Cameron so there will be Three or more Ritts there. So you'all bring your Ritt's and come on down.
BD

Steve English · Post by **Steve English** » 18 Jul 2009 1:37 pm

Bill,

What does the "L" stand for?...Loafer, Looker, Lottasteel, Luckyme???

Bill Dobkins · Post by **Bill Dobkins** » 18 Jul 2009 3:31 pm

Steve, it stands for laquer(spelling)

Steve English · Post by **Steve English** » 22 Jul 2009 8:46 pm

Mine arrived today..

This is going to be a FUN weekend! :D_

Bryan Rankins · Post by **Bryan Rankins** » 24 Jul 2009 1:54 pm

Congrats Steve. I told you she was beautiful. Were they able to get my drool off it? Just kidding. Make sure you get some sleep though. I know you'll enjoy it.

Roger Crawford · Post by **Roger Crawford** » 25 Jul 2009 8:59 am

I hope this topic hangs around for a while!

Bill Dobkins · Post by **Bill Dobkins** » 25 Jul 2009 9:19 am

Roger, with your help I'm sure it will.

Bill Dobkins · Post by **Bill Dobkins** » 26 Jul 2009 8:06 am

This weekend I played with a hard rockin country, R&B band (Missouri's most wanted band)I played my Ritt as hard as one could be played and it never went out of tune once.The more I play this Steel the more I'm amazed at the tone and playability.
Gary R called me Sat. I told him about how well it stayed in tune Friday nite, his comment was, what did you expect, its a Ritt. He was joking of course,but what he said is so true. Gary and the Rittenberry is a force to be dealt with in the steel community. I proud to be the owner of one.
BD

The Steel Guitar Forum

Rittenberry Steel...show us your Ritt!

Your New Rittenberry!

Rittenberry

Rittenberry

Rittenberry

Ritt

New Rittenberry Club Member

Bryan's Ritt

Ritt