| Author |
Topic: Fender Deluxe 8 |
Nick Reed
From:
Russellville, KY USA
|
Posted 14 Oct 2006 11:25 am |
|
I found this Stringmaster style Fender Deluxe 8 for sale. Was salmon pink an original Fender color. NR
 |
|
|
|
George Keoki Lake
From:
Edmonton, AB., Canada
|
Posted 14 Oct 2006 11:52 am
|
|
Very popular with Salmon, but Catfish never seemed atracted to it.
No, I don't think it was a "factory color"...Let's ask the Duke of Tweed, he knows all, see's all, hears all...the great guru of Fender, JODY.  |
|
|
|
Rick Alexander
From:
Florida, USA, R.I.P.
|
Posted 14 Oct 2006 2:00 pm
|
|
It's true, Jody does know all.
I bet he'll say it's not a factory finish.
BUT beneath all that pinkness, there beats a heart of purest swamp ash . . |
|
|
|
Loni Specter
From:
West Hills, CA, USA
|
Posted 14 Oct 2006 3:42 pm
|
|
| Nope, not on steels. Later '60's Strat or Tele custom order maybe. |
|
|
|
Bill Leff
From:
Santa Cruz, CA, USA
|
Posted 14 Oct 2006 4:21 pm
|
|
| I LOVE IT!!!! |
|
|
|
Bill Quinn
|
Posted 14 Oct 2006 4:55 pm
|
|
| It's the same color as our family kitchen appliances were in the 50's. |
|
|
|
Lynn Oliver
From:
Redmond, Washington USA * R.I.P.
|
Posted 14 Oct 2006 7:06 pm
|
|
The Reranch site carries an "original" Fender custom color they call coral, but they claim Fender never used it. The speculation is that coral strats were actually faded Fiesta Red.
Lynn |
|
|
|
Jody Carver
From:
KNIGHT OF FENDER TWEED
|
Posted 15 Oct 2006 5:46 am
|
|
Thank you George and to Rick as well, This was a color that L.F had made up by Sherwin Williams and it was used on a few strats, but then the color was "canned". Leo was an avid fisherman,he had a beautiful boat he named the AquaFen,That's the answer. Seems fishy to me  |
|
|
|
Lynn Oliver
From:
Redmond, Washington USA * R.I.P.
|
Posted 15 Oct 2006 12:56 pm
|
|
So it was never used on a lap steel?
------------------
Lynn Oliver
[This message was edited by Lynn Oliver on 15 October 2006 at 01:57 PM.] |
|
|
|
Lynn Oliver
From:
Redmond, Washington USA * R.I.P.
|
|
|
|
Ron Whitfield
From:
Kaaawa, Hawaii, USA
|
Posted 20 Oct 2006 9:56 am
|
|
Concerning the matter of ash bodies, didn't only the early Stringer's come in ash?
It'll be interesting to see if the penciled date can be resurrected.
Keep us informed!
|
|
|
|
Lynn Oliver
From:
Redmond, Washington USA * R.I.P.
|
Posted 20 Oct 2006 10:40 am
|
|
Consulting with Rick Alexander we think it is most likely an early 56 model. I think that would indicate the body is made from swamp ash, right?
------------------
Lynn Oliver
|
|
|
|
Ron Whitfield
From:
Kaaawa, Hawaii, USA
|
Posted 20 Oct 2006 11:49 am
|
|
At '56, that would probably put it on the cusp of transition from ash.
But, my knowledge on these exact matters is sketchy.
You'll know for sure when the paint is removed, as ash has a distintive graining.
Supposedly, the ash bodies are better sounding than the latter made. |
|
|
|
Mark Tomlinson
From:
Seattle, Washington, USA
|
Posted 20 Oct 2006 6:02 pm
|
|
That's a nice lookin' salmon you got there Lynn - very appropriate here in the PacNW.
I'm curious about the re-finish work and if you'll take it all the way down to the bare wood? (and then re-apply a new white finish)?
Nice purchase - let's get together and jam!
-mt
------------------
--
Mark Tomlinson
mark@careytomlinson.org
www.careytomlinson.org
|
|
|
|
Lynn Oliver
From:
Redmond, Washington USA * R.I.P.
|
Posted 20 Oct 2006 8:07 pm
|
|
Mark I considered doing it myself and spent some time checking out the Reranch site. It turns out that the difference in cost between doing it myself and having it done professionally is only about $150, assuming I screw up at least once (not a bad assumption).
I'd rather use the time to practice--Orville seems to have stepped up the pace a bit lately.
I suspect they will have to take it down to bare wood unless the original finish was perfect when the pink finish was (mis)-applied.
------------------
Lynn Oliver
|
|
|
|
Garry Vanderlinde
From:
CA
|
|
|
|
Mark Tomlinson
From:
Seattle, Washington, USA
|
Posted 21 Oct 2006 11:50 am
|
|
| What year was that guitar made?...(the guitar formerly known as brownie). |
|
|
|
Garry Vanderlinde
From:
CA
|
Posted 21 Oct 2006 12:16 pm
|
|
| 1954, Brownie has "7/54" written on body under tuner tray and "Virginia 8-12-54" written on masking tape in control cavity. |
|
|
|
Lynn Oliver
From:
Redmond, Washington USA * R.I.P.
|
Posted 21 Oct 2006 12:40 pm
|
|
What did you use to remove the brown paint?
------------------
Lynn Oliver
|
|
|
|
Garry Vanderlinde
From:
CA
|
Posted 21 Oct 2006 1:18 pm
|
|
It was removed with a combination of gentle scraping and careful applications of denatured alcohol.
|
|
|
|
Lynn Oliver
From:
Redmond, Washington USA * R.I.P.
|
Posted 21 Oct 2006 3:01 pm
|
|
I'll give that a try. Perhaps I'll be able to recover the date marking if nothing else.
One more question: how did you remove the round-headed brads that hold the fingerboard and logo plate?
------------------
Lynn Oliver
|
|
|
|
Garry Vanderlinde
From:
CA
|
Posted 21 Oct 2006 4:46 pm
|
|
It's worth a try! But be warned…your final result depends on how the new paint interacted with the original finish, if it is even there at all. I also have a Champ that was painted black but it had to be completely refinished because there was no original finish to be found.
There are a number of different chemicals that you can experiment with to see what works best (lacquer thinner, naphtha, mineral spirits, etc.) but denatured alcohol was the first one we tried and it worked so well we never got around to trying the others. With the alcohol, the brown coat came off beautifully in one or two passes when scrapped with a razor blade.
To get the fretboard off use a wide thin flat blade knife like a putty knife and pry ever so gently under the metal board between the fretboard and the wood body and not directly on the nails. Be careful and take your time.
BTW, the work on Brownie was done by David at String Theory string instrument repair in Boca Raton, Fl. I can't praise his work high enough!
|
|
|
|
Garry Vanderlinde
From:
CA
|
Posted 21 Oct 2006 8:00 pm
|
|
| Lynn, what are your pot codes? That's another way to determine its age. |
|
|
|
Lynn Oliver
From:
Redmond, Washington USA * R.I.P.
|
|
|
|
Garry Vanderlinde
From:
CA
|
Posted 22 Oct 2006 2:13 pm
|
|
| Is there a set of six numbers that start with either 137 or 304? example; 137612 would be a CTS pot dated the 12th week of 1956, a 304223 would be a Stackpole pot dated the 23rd week of 1952. Both the CTS and Stackplole pots are very common in these Fenders. |
|
|
|
