Bar and Pick Holders

Daryl Stogner · Post by **Daryl Stogner** » 21 Jul 2004 1:27 am

Someone on the forum, I saw someone mentioned a little accesory that holds a bar, pick and the end tuning tool, and the thing is attached to the PSG's leg. Looks like some tuibng that slips of the leg, but who knows?

Anyway, I was wondering if anyone knows where I can get one of them. They be handy on breaks.

Daryl

Richard Nydegger · Post by **Richard Nydegger** » 21 Jul 2004 1:52 am

I'm pretty sure Bobbe Seymour has them. I bought the clips from "Scottys" and made one from scrap wood.
Rick

Erv Niehaus · Post by **Erv Niehaus** » 21 Jul 2004 5:58 am

Somebody usually has one for sale on e-bay.

Daryl Stogner · Post by **Daryl Stogner** » 21 Jul 2004 7:06 am

Thanks for the help. Got email to get one from Norm McDaniel down in Waco.

It's not like I couldn't make one myself, not a major project or one of those little somethings the wife wants built, that envolves reframing the freshly remodelled bedroom closet or something! Or was that painting the living room, and then repainting it the following week?

CrowBear Schmitt · Post by **CrowBear Schmitt** » 21 Jul 2004 9:27 am

Daryl, there's a fellow in Calif. that makes some very nice bar, wrench and pic holders outta different woods, that i find very nice
he sells them on ebay
i've gotten 2 and am quite happy
his ebay user name is "dustyground"
here's a link to one that sold not too long ago: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=3734957699&ssPageName=STRK:MEWA:IT <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by CrowBear Schmitt on 21 July 2004 at 10:29 AM.]</p></FONT>

Daryl Stogner · Post by **Daryl Stogner** » 21 Jul 2004 11:33 am

Crowbear, that's just wha I had in mind. I'll wait and see what Norm is making out in Waco and go from there. Looks I'll get setup with one before long now!

Thanks

CrowBear Schmitt · Post by **CrowBear Schmitt** » 25 Jul 2004 2:19 am

Daryl, there's one up on ebay now: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=7266&item=3738208857&rd=1

Daryl Stogner · Post by **Daryl Stogner** » 25 Jul 2004 6:34 am

I just bookmarked that eBay holder for future reference. I found one already through Norm in Waco Texas. Thanks for pointing the eBay one out too.

Daryl

------------------
Daryl Stogner
My email: daryl@piknsteel.com
My Website: www.dstogner.com
Dave's Website:www.davestogner.com

Larry Moore · Post by **Larry Moore** » 2 Aug 2004 6:25 pm

Daryl,
I have some I made that holds the Bar and tuning wrench. What size Bar do you have?
I have some 7/8" and 1". What color is your Steel.
I will be in St Louis. We will have a booth at the bottom escalator(Premier Designs Jewelry)next to the Derby Room .
Larry

George McLellan · Post by **George McLellan** » 3 Aug 2004 6:52 am

If I'm not mistaken, Carter makes them also.

------------------
SUAS U' PHIOB
Geo