1970 Fender Twin Reverb
Moderator: Shoshanah Marohn
-
- Posts: 71
- Joined: 23 Sep 1999 12:01 am
- Location: Jasper, AL
1970 Fender Twin Reverb
Hello All,
Been away from the forum for quite a while now, but I had a 1970 Twin given to me this past weekend which brought me back to a place I enjoy.
Anyway, my question is this. Can someone give me a point in the right direction for restoring this amp. It has new tubes with only about 10 hrs of play time on them. The front screen needs replacing, and it needs a new vinyl covering. I would prefer to do the work myself if I can get the parts. I also want to seek suggestions on any improvements/upgrades that should be made while I have it apart.
Thanks
James
Been away from the forum for quite a while now, but I had a 1970 Twin given to me this past weekend which brought me back to a place I enjoy.
Anyway, my question is this. Can someone give me a point in the right direction for restoring this amp. It has new tubes with only about 10 hrs of play time on them. The front screen needs replacing, and it needs a new vinyl covering. I would prefer to do the work myself if I can get the parts. I also want to seek suggestions on any improvements/upgrades that should be made while I have it apart.
Thanks
James
- Bill Terry
- Posts: 2786
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
There have been several threads in the past few months about various Fender Twin circuit mods. When you have a couple of hours to kill do a search in this message area.
Personally, I'd think twice about recovering and re-grilling the amp before you go ahead with it. In the last year or so even 70's Twins are really going up in price, and generally speaking, worn original tolex and grill is more desirable than new. A totally ragged out amp might be the exception.
But if you plan on keeping the amp and just want to spiff it up, that's fine too. Have fun....
------------------
bterry.home.netcom.com
Personally, I'd think twice about recovering and re-grilling the amp before you go ahead with it. In the last year or so even 70's Twins are really going up in price, and generally speaking, worn original tolex and grill is more desirable than new. A totally ragged out amp might be the exception.
But if you plan on keeping the amp and just want to spiff it up, that's fine too. Have fun....
------------------
bterry.home.netcom.com
-
- Posts: 71
- Joined: 23 Sep 1999 12:01 am
- Location: Jasper, AL
Thanks Bill,
I'll try the search. I was trying to do that , but I was trying to do it manually. (I was in such a hurry that I didn't see the search link at the top of the page ).
As far as the original covering for the grill, it no longer exists; however the black vinyl is still there and in fairly decent condition. About 3 Years ago, my uncle(the original owner) wanted me to restore the amp. So I took it home and started a parts list, showed it to him, he said ok and I started tearing it down. When it came time to place the first order, he decided to back out, and the amp has been sitting that way since. I did go out on my own and bought new tubes for the amp and it sounds great. I do plan on keeping the amp, and I just want it to look nice.
Thanks
James<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by James M Banks on 15 August 2000 at 02:10 PM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by James M Banks on 15 August 2000 at 02:10 PM.]</p></FONT>
I'll try the search. I was trying to do that , but I was trying to do it manually. (I was in such a hurry that I didn't see the search link at the top of the page ).
As far as the original covering for the grill, it no longer exists; however the black vinyl is still there and in fairly decent condition. About 3 Years ago, my uncle(the original owner) wanted me to restore the amp. So I took it home and started a parts list, showed it to him, he said ok and I started tearing it down. When it came time to place the first order, he decided to back out, and the amp has been sitting that way since. I did go out on my own and bought new tubes for the amp and it sounds great. I do plan on keeping the amp, and I just want it to look nice.
Thanks
James<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by James M Banks on 15 August 2000 at 02:10 PM.]</p></FONT><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by James M Banks on 15 August 2000 at 02:10 PM.]</p></FONT>
- Bill Terry
- Posts: 2786
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
James,
You should be able to find grill cloth that is very close to what was original on the amp. Here's one place, there are lots of others, do a search on google.com for grill cloth.
www.vibroworld.com/parts/tech10.html
Bill
------------------
bterry.home.netcom.com
You should be able to find grill cloth that is very close to what was original on the amp. Here's one place, there are lots of others, do a search on google.com for grill cloth.
www.vibroworld.com/parts/tech10.html
Bill
------------------
bterry.home.netcom.com
-
- Posts: 249
- Joined: 28 Jun 1999 12:01 am
- Location: San Jose, CA, USA
Mojotone has Fender grill cloth. Their web site is at: http://www.mojotone.com/
-
- Posts: 71
- Joined: 23 Sep 1999 12:01 am
- Location: Jasper, AL
Thanks for the info. I searched through the forum last night and found a lot of good info about these amps. I am going to take a few evenings and research the info that I have found, and what you guys have suggested. I can't wait to get it going again. When I got my first steel, I used that amp for about 6 months until I could get my own, and I have never been satisfied with any other amp.
Thanks
James
Thanks
James
- Dave Van Allen
- Posts: 6157
- Joined: 4 Aug 1998 11:00 pm
- Location: Doylestown, PA , US , Earth
- Contact:
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
-
- Posts: 71
- Joined: 23 Sep 1999 12:01 am
- Location: Jasper, AL
I really want to experiment with different speaker combos. I have the "Live at Panther Hall" cd, and I absolutely love the sound that Lloyd had on the recording. I'm not sure who played on it, but Gene Watson's "Farewell Party" is probably my all time favorite sound for the steel.
I haven't had time to see what chassis the amp has, but I have heard of some mods that you can do. I really want to research this well befor I break out the old soldering iron, though.
Another question. Should I buy new hardware, or just have the old re-plated?
Thanks
James
I haven't had time to see what chassis the amp has, but I have heard of some mods that you can do. I really want to research this well befor I break out the old soldering iron, though.
Another question. Should I buy new hardware, or just have the old re-plated?
Thanks
James
- Ricky Davis
- Posts: 10964
- Joined: 4 Aug 1998 11:00 pm
- Location: Bertram, Texas USA
- Contact:
Hey James the guy that played steel on "Live at Panther Hall" and Gene Watsons' "Farewell Party" is the same guy>Lloyd Green. No wonder you like the sound he gets.
Lloyd played through several different Fender amps and I had a D-130 in a twin; but can't remember which amp for what recordings.
------------------
Ricky Davis
http://hometown.aol.com/sshawaiian/RickyHomepage.html
http://users.interlinks.net/rebel/steel/steel.html
www.mightyfinemusic.com
sshawaiian@aol.com
Lloyd played through several different Fender amps and I had a D-130 in a twin; but can't remember which amp for what recordings.
------------------
Ricky Davis
http://hometown.aol.com/sshawaiian/RickyHomepage.html
http://users.interlinks.net/rebel/steel/steel.html
www.mightyfinemusic.com
sshawaiian@aol.com
-
- Posts: 810
- Joined: 16 Aug 2000 12:01 am
- Location: Middleport, Ohio USA
-
- Posts: 71
- Joined: 23 Sep 1999 12:01 am
- Location: Jasper, AL
-
- Posts: 810
- Joined: 16 Aug 2000 12:01 am
- Location: Middleport, Ohio USA
James, the JBL D & K series speakers are no longer made. You got to find them used. They were offered as options years ago in Fender amps. JBL will still recone those old speakers but it is expensive and I think it is worth the extra $$$. I have an old D-130 in a tweed reisue Fender Bassman and love it!! Got this idea from Tom Brumley, he uses 2 of them. Good luck searching but also remember, Tone is in the ear of the beholder.
Take care, Greg
Take care, Greg
-
- Posts: 71
- Joined: 23 Sep 1999 12:01 am
- Location: Jasper, AL
-
- Posts: 71
- Joined: 23 Sep 1999 12:01 am
- Location: Jasper, AL
Well, I guess I lied. After gathering information needed for restoration, I finally got around to pulling out the chassis on the amp. Inside, under some dust, I found a date stamp that read JUN 02 1971. So I guess this thread should read 1971 FENDER TWIN REVERB.
Anyway, thanks to all who have given me advice and links to information and parts. I hope to get this project done within a month or so, depending on how much "allowance" my wife gives me.
Thanks again
James
Anyway, thanks to all who have given me advice and links to information and parts. I hope to get this project done within a month or so, depending on how much "allowance" my wife gives me.
Thanks again
James
- Jack Stoner
- Posts: 22087
- Joined: 3 Dec 1999 1:01 am
- Location: Kansas City, MO
- Bill Terry
- Posts: 2786
- Joined: 29 Apr 1999 12:01 am
- Location: Bastrop, TX
James,
Be careful of the chassis numbers on the tube charts. I bought my '69 Twin and it had an AB763 chassis number on the tube chart, but was definitely AC568. I read that when CBS bought Fender they had a lot of those AB763 tube charts around and used them up into the early 70's.
Here's a link you might find helpful:
www.ampwares.com/ffg/
------------------
bterry.home.netcom.com
Be careful of the chassis numbers on the tube charts. I bought my '69 Twin and it had an AB763 chassis number on the tube chart, but was definitely AC568. I read that when CBS bought Fender they had a lot of those AB763 tube charts around and used them up into the early 70's.
Here's a link you might find helpful:
www.ampwares.com/ffg/
------------------
bterry.home.netcom.com