Steel Guitar Rag
Moderator: Brad Bechtel
- George Keoki Lake
- Posts: 3665
- Joined: 23 Nov 1999 1:01 am
- Location: Edmonton, AB., Canada
Steel Guitar Rag
The STEEL GUITAR RAG ... (Love it or hate it) ... It's an old steel classic, perhaps older than many of us may fully realize. I have a recording of a tune titled the "Guitar Rag" played on acoustic steel which dates back anywhere between 1928-1934 ...(can't be certain). It is unmistakably the 'skeleton' of what we recognize as the "Steel Guitar Rag" today.
Many attribute Leon as being the composer. However I suggest he probably rehashed this old tune ("Guitar Rag") into its present format .... I'm sure this will be open for a lot of debate and discussion. However, I have a question which someone on the Forum might be able to answer:
Back around 1944, Bill Boyd and his Cowboy Ramblers recorded probably one of the first (modern) 78rpm versions of "New Steel Guitar Rag" which proved to be a huge success. It was heard in every juke box across the US and Canada. Whoever played steel on that recording played it in a very simplistic style...nothing challenging at all. Who was that masked man ? Just curious.
A few years later, (about 1947), Red Murrell produced a swinging arrangement of the "Steel Guitar Rag" in 3 part harmony between the steel, a take-off guitarist and an accordionist. Anyone recall that particular recording and who played the steel ?
There have been so many recordings of the Steel Guitar Rag over the years....the wierdest and wildest had to be the version recorded by Roy Smeck.
My all time favorite is played by Bill Stafford ... absolutely awesome!
Many attribute Leon as being the composer. However I suggest he probably rehashed this old tune ("Guitar Rag") into its present format .... I'm sure this will be open for a lot of debate and discussion. However, I have a question which someone on the Forum might be able to answer:
Back around 1944, Bill Boyd and his Cowboy Ramblers recorded probably one of the first (modern) 78rpm versions of "New Steel Guitar Rag" which proved to be a huge success. It was heard in every juke box across the US and Canada. Whoever played steel on that recording played it in a very simplistic style...nothing challenging at all. Who was that masked man ? Just curious.
A few years later, (about 1947), Red Murrell produced a swinging arrangement of the "Steel Guitar Rag" in 3 part harmony between the steel, a take-off guitarist and an accordionist. Anyone recall that particular recording and who played the steel ?
There have been so many recordings of the Steel Guitar Rag over the years....the wierdest and wildest had to be the version recorded by Roy Smeck.
My all time favorite is played by Bill Stafford ... absolutely awesome!
-
- Posts: 1547
- Joined: 27 Nov 2002 1:01 am
- Location: San Diego , CA
- Contact:
My music book on Western Swing states the song was based on a 1923 recording by a black guitarist by the name of Sylvester Weaver. He was a bottle neck player and called the song Steel Guitar Rag. It's a fun song to play in Open E or D bottle neck as well as steel and leaves a lot of room for embellishments. I would like to post it in Tab for C6 tuning if I can just get the hang of using Tab edit. I didn't know they were making many records back in 1923, musta been considered that "old timey music" ?
- Blake Hawkins
- Posts: 1844
- Joined: 4 Aug 1998 11:00 pm
- Location: Florida
George, I have a copy of Roy Smeck's "Steel Guitar Rag." It is so strange, I suspect he is doing more of a parody than the actual song. Maybe he is just telling us he does not like it.
Smeck's style is unique, I think.
I have several of his records and would not dare to try to play any of his arrangements in public.
Blake
Smeck's style is unique, I think.
I have several of his records and would not dare to try to play any of his arrangements in public.
Blake
-
- Posts: 4922
- Joined: 24 Jan 2001 1:01 am
- Location: Macon Ga USA
- George Keoki Lake
- Posts: 3665
- Joined: 23 Nov 1999 1:01 am
- Location: Edmonton, AB., Canada
Well, they were indeed making numerous (flat disc) recordings back in 1923. (Pathe' is just one label that comes to mind....very thick platters with narrow grooves). Years earlier, recordings were done on the Edison Cylinders. (I still have an olde Edison Cylinder machine in excellent working condition plus about 50 cylinders...no steel guitar music can be detected on any of them). Your book regarding the 1923 recording of SGR makes it much earlier than my copy of a tune called "Guitar Rag" which must be proof of sorts that Leon could not possibly be the composer as is so often claimed.
Yes, Jerry's recording is great, (like everything he has ever done). However don't ask him to play SGR as he seldom, if ever plays it in public anymore.
Roy Smeck called himself the "Wizard of the Strings" ... justifiably ! Many hated his style, (particularly his wide vibrato), but I really enjoyed and appreciated everything that man ever did including SGR! His technic was fantastic.
I would still appreciate the answers to my questions (above) re: who played SGR on the Bill Boyd and Red Murrell recordings...any answers ? <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by George Keoki Lake on 08 June 2003 at 07:20 AM.]</p></FONT>
Yes, Jerry's recording is great, (like everything he has ever done). However don't ask him to play SGR as he seldom, if ever plays it in public anymore.
Roy Smeck called himself the "Wizard of the Strings" ... justifiably ! Many hated his style, (particularly his wide vibrato), but I really enjoyed and appreciated everything that man ever did including SGR! His technic was fantastic.
I would still appreciate the answers to my questions (above) re: who played SGR on the Bill Boyd and Red Murrell recordings...any answers ? <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by George Keoki Lake on 08 June 2003 at 07:20 AM.]</p></FONT>
- Rick Aiello
- Posts: 4701
- Joined: 11 Sep 2000 12:01 am
- Location: Berryville, VA USA
- Contact:
I have Sylvester Weaver's Guitar Rag on a compilation CD ...
THE SLIDE GUITAR: BOTTLES, KNIVES, & STEEL, VOL. 1
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Rick Aiello on 08 June 2003 at 08:15 AM.]</p></FONT>
THE SLIDE GUITAR: BOTTLES, KNIVES, & STEEL, VOL. 1
<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Rick Aiello on 08 June 2003 at 08:15 AM.]</p></FONT>
My all-time favorite is Jerry Byrd's rendition; the one Paul Graupp mentioned in his post.
The interesting thing about this recording is it was done solely on C6 with the 6th srring tuned to C#. Many players play this on a 6th tuning as oppossed to an open E tuning, but Jerry discovered a way to get the exact same opening lick sounds and timbre as heard on a straight E tuning; while using C6.
IE, most players who play it on C6, just walk up the strings at the 4th fret. Jerry didn't. The way he did it is not easy to master. My dear friend (and Jerry Byrd guru) Wayne Tanner showed Tom Brumley and I how Jerry did it.
If you want to hear the closest rendition (I know of) of JB's style of playing SGR, get Tom Brumley's "In Time" CD. He even used a 7 string Rick baekelite on this selection.
May Jesus richly bless JB, TB and ALL of you,
carl
The interesting thing about this recording is it was done solely on C6 with the 6th srring tuned to C#. Many players play this on a 6th tuning as oppossed to an open E tuning, but Jerry discovered a way to get the exact same opening lick sounds and timbre as heard on a straight E tuning; while using C6.
IE, most players who play it on C6, just walk up the strings at the 4th fret. Jerry didn't. The way he did it is not easy to master. My dear friend (and Jerry Byrd guru) Wayne Tanner showed Tom Brumley and I how Jerry did it.
If you want to hear the closest rendition (I know of) of JB's style of playing SGR, get Tom Brumley's "In Time" CD. He even used a 7 string Rick baekelite on this selection.
May Jesus richly bless JB, TB and ALL of you,
carl
- George Keoki Lake
- Posts: 3665
- Joined: 23 Nov 1999 1:01 am
- Location: Edmonton, AB., Canada
-
- Posts: 1547
- Joined: 27 Nov 2002 1:01 am
- Location: San Diego , CA
- Contact:
H.C. Spear was responsible for the recording careers of the major Delta bluesman. He used to make test records for the larger record companies, working as a talent scout. He made his test records on metal disks or aluminum base. And you would record with a diamond needle into the grooves, by 1926 they had electrical machines. The big companies cut on about 1 to 1 1/2 inches of chilled harden beeswax in the 1920's and 30's. That was the master, then they made a pressing mother from the master. They had a lot of trouble recording in the south because of the great heat in the summers, the beeswax master went right back to the refrigerator. And this is why they made at least two takes of every song. They had a wire recorder in the 30's, but the big companies didn't use it.<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Jesse Pearson on 08 June 2003 at 08:44 AM.]</p></FONT>
- George Keoki Lake
- Posts: 3665
- Joined: 23 Nov 1999 1:01 am
- Location: Edmonton, AB., Canada
Actually, wire recorders were still hanging around in the mid forties. I had one! Gawd help you if the wire ever got away on the spindle....wire everywhere! Wire was on the scene prior to the earliest reel to reel tape format. Wire quality was really lousy for music, but was ok for speech and/or dictation. I also had a disc recorder in the late forties. In those days you could go to your favorite "radio supply" store and purchase blank aluminum 10" discs coated with shellac. Those blanks had two holes in the center, one was for the normal center shaft. The other hole was for a pop-up shaft on the cutter turntable to keep the disc from slipping while the cutting was in process. As long as the tracking gear was ok, a fairly good (for those days) quality disc could be cut. I ruined many discs due to poor alignment. I'm sure many of you olde tymers will recall those old cutting machines. My earliest cuttings of the old (shortwave) "Hawai'i Calls" radio shows were done on that disc recorder which I had connected directly to a radio. (Did I hear someone ask if dinosaurs were running around in my back yard ?)<FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by George Keoki Lake on 08 June 2003 at 09:45 AM.]</p></FONT>
-
- Posts: 422
- Joined: 6 Jan 2000 1:01 am
- Location: Oakland, Ca.
- George Keoki Lake
- Posts: 3665
- Joined: 23 Nov 1999 1:01 am
- Location: Edmonton, AB., Canada
Dave, I met Eddie Martin in the mid-fifties when he was on tour with the Hank Thompson Band (as I recall). I'm inclined to think you are correct. Eddie had a swinging style very similar to what can be heard on the Red Murrell disc of SGR. He was playing a 4 neck Swingmaster when he hit town. (First one I had ever seen). I wonder what ever became of him....? Anyone know ?
- Mark van Allen
- Posts: 6378
- Joined: 26 Sep 1999 12:01 am
- Location: Watkinsville, Ga. USA
- Contact:
George, I posted on this topic a couple of years back and I think got some folks angry with me- my point then was that SGR became THE signature tune for steel guitar through the popularity and wide exposure of Bob Wills' band- to the point where steelers everywhere either played or fielded requests for it. I still get requests today. As far as I've heard, Leon was always acclaimed and acknowledged as the composer- even a quick listen to Sylvester Weaver's version reveals almost NO discrepancy in melody and form, with the exception of an added C section. From what I've read, Bob pressured Leon to come up with a signature tune for the radio dates they were playing... I've always wondered if he subconciously pulled up the tune he'd heard somewhere, or if he considered a slight reworking to actually be a unique composition. Whatever it was, Sylvester Weaver should certainly get credit among steelers for penning the original melody so many folks associate with Steel guitar. (No disrespect meant to Leon and his many talents).
------------------
C'mon by and visit!- www.markvanallen.com
My Bands: Sugarland Kate and the Retreads Kecia Garland Band Shane Bridges Band Dell Conner Blues Band
------------------
C'mon by and visit!- www.markvanallen.com
My Bands: Sugarland Kate and the Retreads Kecia Garland Band Shane Bridges Band Dell Conner Blues Band
-
- Posts: 1547
- Joined: 27 Nov 2002 1:01 am
- Location: San Diego , CA
- Contact:
- Earnest Bovine
- Posts: 8318
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA USA
- George Keoki Lake
- Posts: 3665
- Joined: 23 Nov 1999 1:01 am
- Location: Edmonton, AB., Canada
- Jody Carver
- Posts: 7968
- Joined: 3 Jan 2001 1:01 am
- Location: KNIGHT OF FENDER TWEED
- Contact:
- George Keoki Lake
- Posts: 3665
- Joined: 23 Nov 1999 1:01 am
- Location: Edmonton, AB., Canada
Jesse, if you're interested in radio shows featuring steel, there's a guy named Jimmie Willhelm in Texas with over a thousand tapes, including Spade Cooley, Tex Williams, etc. His website is www.vintagecowboymusic.com
-
- Posts: 1547
- Joined: 27 Nov 2002 1:01 am
- Location: San Diego , CA
- Contact:
-
- Posts: 4922
- Joined: 24 Jan 2001 1:01 am
- Location: Macon Ga USA
-
- Posts: 1902
- Joined: 29 Jan 1999 1:01 am
- Location: killeen,tx usa * R.I.P.
Steel Guitar Rag is still a popular number where ever we play. We don/t use it as a break # while every one heads to the bathroom and don't play it lightning fast. We play it in time so that they "rag" it like it was intended to be. I have had folks to tell me to pep it up;"let me see what you can do". I tell them we play DANCE music and he can leave if he doesn't like it. OK Keoki, I'll let the cat out of the bag. Keoki wrote SGR in1918 and Jody wrote the lyrics 3 yrs before Cliffie Stone was born. CC
-
- Posts: 112
- Joined: 24 Jul 2000 12:01 am
- Location: Oregon, USA
Speaking of Cliffie Stone, the lyrics are GREAT. I had a Speedy West LP with the lyrics and they really added to the song IMHO. Cindy Cashdollar has a good arrangement on her Homespun tape that lays out real nice. I still think Leon's original version with Bob Wills absolutely burns. I remember the first time I heard it on a car radio in the middle of the night driving through Santa Barbara. I think it's what sparked my interest in steel guitars.
Haere mai,
Steve H.
S8A6
Haere mai,
Steve H.
S8A6