A few guitars available

Guitars, fiddles, banjos, keyboards, clarinets, bagpipes, etc.
Post Reply
User avatar
Nick Koff
Posts: 1311
Joined: 7 Feb 2013 11:13 am
Location: Lost Angeles, California
Contact:

A few guitars available

Post by Nick Koff »

Guitars with benders, single pickup, standard shape, high-end, low-end... Photo sort of shows some of the ones that are available, but not all. If you're interested, or want a custom-built guitar message me. More photos available on request.

By the way, a shout out of thanks to Doug Paluch for getting me started in this fascinating and fun hobby.

#27 Rosalita.$1000 (She ain't a beauty but she's alright..."
Warmoth body in Coral Orange base w Yellow Nitro top and Copper Mist back and sides with matching Copper Mist pickguard.
Neck: Musikraft 10 Radius 9.5, rock maple two piece. Black top & side dots, semi-rolled. 6230 Vintage Small, soft 57v .86/.96, 1 11/16ths, bone nut Copper Mist on shaft, amber yellow on fingerboard.
PICKUPS: Texas Specials.
HARDWARE: Wilkinson bridge & saddles, Vintage style switch tip, knobs, control plate, jack cup, string tree.
Kluson Deluxe Tuners (nickel)
ELECTRONICS: CRL 3-way switch, CTS 250K Pots. 022uF/ Orange Drop Strings: Ernie Ball .010s

Image


#64 Choc-0-Benda. Bill Bores B-Bender. $2000
Bunnynose Guitars paint & finish on a high quality WD alder body with a custom cow pickguard.
Neck: USA Custom Guitar neck. Birdseye maple shaft with an ebony fretboard. 9.5" radius Clay dots, ‘54 Contour. “C” shape about .85 at the first fret. Soft v from about the nut to third or fifth fret. 22 frets. 6105 wire. Headstock / Neck has been repaired. It’s stronger now than it was before.
PICKUPS: Lindy Fralin Blues Specials
HARDWARE: Glendale raw deal vintage bridge, “Twang” saddles, neck plate, control plate, knobs, switch tip, “Twang” ferrules and jack cup
Callaham string tree, Fender bone nut & strap knobs
Tonepros Kluson Tuners
ELECTRONICS:CRL 3-way switch, CTS 450G Series 250K Vintage Dish Back Potentiometer - SOLID Shaft - Audio Taper - 10% Tolerance; .047uf/200v - 196P Sprague Vitamin Q - New Old Stock - Paper in Oil cloth pushback wire.
Strings: Ernie Ball .010s

Image

#90 Pissy (Mongrel 2) $2000
Wildwood ash body w/ Bunnynose Finishes finish
Neck: Musikraft BN 2 Piece , 21 fret, Adjust @ Head,
Roasted Rock Maple shaft, flat-sawn fb, black dots, Radius:
10" Fret 6105 Nickel Silver (Medium) V 86 96 (1957)
PICKUPS: Throbak soapbar P90 neck & Throbak Pre-T 301 PAF bridge
WD pickguard: Paint Bright Blue
HARDWARE: Glendale half-bridge w/brass saddles, knobs, control and neck plate, Rutters switch tip
Bone nut
Vintage style strap knobs, ferrules, electrosocket jack cup string tree. Kluson Deluxe Tuners
ELECTRONICS: CRL 3-way switch, CTS 450G Series 500K Potentiometer - Split Shaft - Audio Taper - 10% Tolerance; (2) .022uf/ Orange Drop caps, CRL 3-way toggle switch and
Switchcraft output jack, vintage style cloth push back wire
Strings: Ernie Ball Cobalt .010s

Image


#92 "Yardbird" $950

Contoured body w/ Bunnynose KludgeBrown finish
Neck: One piece maple, vintage honey-amber tinted finish, 21 6150 medium jumbo frets, 10 inch radius, soft 'V' 1 5/8 inch nut. .89/.93 in. Bone nut.
PICKUP: Don Mare’s “Yard Boy” - ‘54 Esquire 5.86k ℧ Tribute: Yardbird’s tone w/Jeff Beck
Bunnynose pickguard - "Cowboys"
HARDWARE: Vintage style Bridge & Saddles, Control Plate,
Neck Plate, Knobs, Ferrules, Tip
Electrosocket jack cup
Callaham string tree
Kluson Deluxe Tuners
ELECTRONICS: CTS 250K Potentiometers - (2) .047uf/ Orange Drop capacitor, Switchcraft output jack, vintage style cloth push back wire
Strings: Ernie Ball Cobalt .010s


Image
Just another belt & suspenders guy...
User avatar
Nick Koff
Posts: 1311
Joined: 7 Feb 2013 11:13 am
Location: Lost Angeles, California
Contact:

Post by Nick Koff »

Up.
Just another belt & suspenders guy...
Post Reply