So, just getting into the string board guitars; and
decided to go with an instrument in need of some love...
Here is my first PSG (ebay), it's a Blanton 3 pedal 4 lever 'Custom'
Anyone recognize the guitar? Maybe I should try to get in touch with Mr Blanton for any history available?
repair job options on a new to me steel
Moderator: Shoshanah Marohn
- David Laveau
- Posts: 30
- Joined: 1 Feb 2023 8:53 pm
repair job options on a new to me steel
Last edited by David Laveau on 9 Feb 2023 4:31 pm, edited 3 times in total.
- David Laveau
- Posts: 30
- Joined: 1 Feb 2023 8:53 pm
- Patrick Timmins
- Posts: 178
- Joined: 19 Jul 2019 1:32 pm
- Location: Seattle
- Contact:
- David Laveau
- Posts: 30
- Joined: 1 Feb 2023 8:53 pm
-
- Posts: 2235
- Joined: 17 May 2010 9:27 am
- Location: West Virginia, USA
A quick fix to the end plate, For the Controls and Plug In mounting area. Measure and cut a piece of 3/32" Aluminum plate, To match the surface of the end plate, Drill holes for controls and plug in, Drill mounting screw holes in corners of plate. Polish and attach to broken wood panel.
If you have enough wire to move the controls and plug in toward the front of the guitar, An ash tray mounting area would be possible. Make the ash tray removable so guitar will fit in case.
If the guitar was damaged in its case, Some sort of padded blocks may be needed in the case to protect controls.
If you have enough wire to move the controls and plug in toward the front of the guitar, An ash tray mounting area would be possible. Make the ash tray removable so guitar will fit in case.
If the guitar was damaged in its case, Some sort of padded blocks may be needed in the case to protect controls.