output connection?

Ashoke kumar Das · Post by **Ashoke kumar Das** » 2 May 2022 6:25 am

I have mixer yahama MG10XU model
I am connecting this with laptop. I'm putting the guitar jack into mixer input for guitar. next where I will connect output Jack into mixer for sound?

Howard Parker · Post by **Howard Parker** » 2 May 2022 6:41 am

Without more detail on what you're attempting I'll just point you to a users manual!

CLICK HERE! Shows many typical setups.

h

Erv Niehaus · Post by **Erv Niehaus** » 2 May 2022 6:49 am

You will need some sort of amplifier and speaker.
Erv

Fred Treece · Post by **Fred Treece** » 2 May 2022 7:48 am

USB out of mixer into laptop. Listen with headphones, the crummy laptop speaker, or connect the speaker/headphones output on the laptop to a nice little studio monitor.

Ashoke kumar Das · Post by **Ashoke kumar Das** » 4 May 2022 1:10 am

well, I'm useing the Ronald CM30 for output sound.
And also use the Vox pathfiender model guitar amp.
I want to record my playing through mixer to laptop.thanks

Ashoke kumar Das · Post by **Ashoke kumar Das** » 4 May 2022 1:12 am

I'm connecting mixer with usb to laptop.
thanks.

Fred Treece · Post by **Fred Treece** » 4 May 2022 7:38 am

Do you have recording software? Reaper, Cakewalk by Bandlab, Garage Band, etc., all should recognize your mixer. You’ll probably have to download and install a driver.

Ashoke kumar Das · Post by **Ashoke kumar Das** » 5 May 2022 1:21 am

well Fred, I have already installed software in laptop.
Anyhow please give me a proper guideline about this. you have already given me software names. I didn't load that. would I have to install anything for the interface or soundcard? I am not comfortable to operate everything. I have to need to get help from my friend.
thanks for your help.

Ashoke kumar Das · Post by **Ashoke kumar Das** » 5 May 2022 1:26 am

Respected Fred,I have installed Audacity software.
thanks.

Fred Treece · Post by **Fred Treece** » 5 May 2022 7:10 am

Your mixer is an audio interface. You should be able to select it as a preferred device in Audacity. As I said before, you may need to download and install a compatible driver, and also there may be I/O settings that need to be entered to get the mixer and Audacity to communicate properly.

Ashoke kumar Das · Post by **Ashoke kumar Das** » 6 May 2022 12:34 am

Well Fred, why is meaning I/O settings?thanks for your advice.

Fred Treece · Post by **Fred Treece** » 6 May 2022 6:57 am

I/O = Input/Output.
You should definitely get a techy friend to help you get set up.

Ashoke kumar Das · Post by **Ashoke kumar Das** » 6 May 2022 7:32 am

Thanks. Respected Fred.

Jon Light · Post by **Jon Light** » 6 May 2022 7:39 am

There are many many Youtube tutorials. Key sample search words: recording audacity interface usb