Double operating knee lever

For people who build steel guitars

Moderator: J D Sauser

Post Reply
User avatar
Bill Ferguson
Posts: 5843
Joined: 4 Aug 1998 11:00 pm
Location: Milton, FL USA
Contact:
Contact Bill Ferguson

Double operating knee lever

Post by Bill Ferguson »

Many many years ago (1971), my mentor, Mac Atcheson, devised a way to make a single knee lever swing to the left and to the right.
This was great for E9 LKR and C6 LKL. Both changes could work with one knee lever, with a couple of bellcranks and a little locking mechanism.

This has never been released, but since Mac is no longer with us, I am making this public.

It not only saves space, but also the cost of an additional knee lever kit.

Here are the plans:

Image
Image
Image

I hope these will benefit some of you working on steels.
AUTHORIZED PEAVEY, George L's, Goodrich dealer. I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables and Peavey Nashville-Session 112 or 115.
Top
User avatar
Barry Coker
Posts: 868
Joined: 22 Jun 2017 9:59 pm
Location: Bagley Alabama, USA

Post by Barry Coker »

Very Cool Bill

Barry
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!!
Top
User avatar
John Sims
Posts: 689
Joined: 18 Sep 2000 12:01 am
Location: Ft. Lauderdale, FL

Post by John Sims »

A 'U' shaped lever would allow LKL and LKR without having to move your knee to the other side of the lever I would imagine (having never played a D-10!)...
Best Regards,

John

1997 Carter U-12 Double Body-Natural Birdseye Maple-8p/5k, Peavey Nashville 1000 Amp, Goodrich L10K Vol. Pedal, Boss DD-3 Delay, Boss CE-5 Chorus, Behringer UMC-204HD Audio Interface, AKAI MPK Mini MK3 Professional Midi Keyboard/Controller, Gretsch Bobtail Resonator, Fender Banjo, Rondo SX Lap Steel (C6), DIY Lap Steel (Open D), and a few Mojo Hand Cigar Box Guitars (MojoHandGuitars.com).
Top
User avatar
Bill Ferguson
Posts: 5843
Joined: 4 Aug 1998 11:00 pm
Location: Milton, FL USA
Contact:
Contact Bill Ferguson

Post by Bill Ferguson »

"A 'U' shaped lever would allow LKL and LKR without having to move your knee to the other side of the lever"

That would take up more space than 2 separate knee levers and I don't believe that you could fold that up to put the steel in it's case.
AUTHORIZED PEAVEY, George L's, Goodrich dealer. I have 2 steels and several amps. My current rig of choice is 1993 Emmons LeGrande w/ 108 pups (Jack Strayhorn built for me), Goodrich OMNI Volume Pedal, George L's cables and Peavey Nashville-Session 112 or 115.
Top
User avatar
John Swain
Posts: 1602
Joined: 12 Feb 2000 1:01 am
Location: Winchester, Va

Post by John Swain »

Bill I had one similar in 1976 ! John Babirad looked at my Emmons and designed an even simpler method to allow LKR to also work as C6 LKL.
Top
User avatar
John Sims
Posts: 689
Joined: 18 Sep 2000 12:01 am
Location: Ft. Lauderdale, FL

Post by John Sims »

Yep, makes sense Bill, but it could be removable...
Best Regards,

John

1997 Carter U-12 Double Body-Natural Birdseye Maple-8p/5k, Peavey Nashville 1000 Amp, Goodrich L10K Vol. Pedal, Boss DD-3 Delay, Boss CE-5 Chorus, Behringer UMC-204HD Audio Interface, AKAI MPK Mini MK3 Professional Midi Keyboard/Controller, Gretsch Bobtail Resonator, Fender Banjo, Rondo SX Lap Steel (C6), DIY Lap Steel (Open D), and a few Mojo Hand Cigar Box Guitars (MojoHandGuitars.com).
Top
Bobby D. Jones
Posts: 2916
Joined: 17 May 2010 9:27 am
Location: West Virginia, USA

Post by Bobby D. Jones »

A U shaped knee lever could be folded 90 degrees, Upward and toward the front of the guitar, So it would fit in case.

Some sort of spring loaded pin lock could be used, To hold the U shaped knee lever in position, Pull pin to unlock the knee lever and fold up for travel.
Top
Pat Chong
Posts: 422
Joined: 22 Dec 2015 9:04 pm
Location: New Mexico, USA

Post by Pat Chong »

Wow.
A multi-use lever, could even be used on the same neck. It also looks like something that could help someone with a handycap, pending on which way the lever is pointing.
....Pat
Top
Post Reply

Return to “Builders' Corner”