What was the first Steel Guitar Song you learned?
Moderator: Shoshanah Marohn
-
- Posts: 7
- Joined: 1 Feb 2021 6:58 pm
- Location: Texas, USA
What was the first Steel Guitar Song you learned?
My first song was What Child is This?
This discussion should help all new players to try easier songs first.
Jason Rivet
Richardson, TX
This discussion should help all new players to try easier songs first.
Jason Rivet
Richardson, TX
Last edited by Jason Rivet on 16 Aug 2021 6:51 am, edited 1 time in total.
- Andrew Goulet
- Posts: 512
- Joined: 6 Oct 2010 7:05 pm
- Contact:
- Jack Hanson
- Posts: 5024
- Joined: 19 Jun 2012 3:42 pm
- Location: San Luis Valley, USA
- Dale Rottacker
- Posts: 3513
- Joined: 3 Aug 2010 6:49 pm
- Location: Walla Walla Washington, USA
- Contact:
I think Honkey Tonk Angels
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
- Larry Dering
- Posts: 5076
- Joined: 17 May 2013 11:20 am
- Location: Missouri, USA
- Roger Rettig
- Posts: 10548
- Joined: 4 Aug 2000 12:01 am
- Location: Naples, FL
- Contact:
When I got my first steel it coincided with my first exposure to Emmons' 'Wichita Lineman' ('Suite Steel'). I drove down to my old friend, Gerry Hogan, in Newbury and begged him to show me where it lay on my 3+1 set-up. Note by painstaking note, I wrote it in a sort of shorthand tablature (before I knew that tab existed) and I'm delighted to say that I still have that piece of paper.
I learned nothing from that ordeal, however - learning 'by rote' teaches you nothing.
I was already an experienced guitarist and realized pretty quickly that I needed to learn the steel's fretboard and its musical symmetry. Only then, and by using my intuitive sense of 'intervals', was I able to play anything that came into my head. That, for me, was the real 'open sesame'.
Learn your scales and you can play any tune. I'm glad I came to that realization early.
I learned nothing from that ordeal, however - learning 'by rote' teaches you nothing.
I was already an experienced guitarist and realized pretty quickly that I needed to learn the steel's fretboard and its musical symmetry. Only then, and by using my intuitive sense of 'intervals', was I able to play anything that came into my head. That, for me, was the real 'open sesame'.
Learn your scales and you can play any tune. I'm glad I came to that realization early.
Roger Rettig - Emmons D10
(8+9: 'Day' pedals) Williams SD-12 (D13th: 8+6), Quilter TT-12, B-bender Teles and several old Martins.
----------------------------------
(8+9: 'Day' pedals) Williams SD-12 (D13th: 8+6), Quilter TT-12, B-bender Teles and several old Martins.
----------------------------------
- scott murray
- Posts: 2752
- Joined: 4 Aug 1998 11:00 pm
- Location: Asheville, NC
-
- Posts: 371
- Joined: 9 Jan 2007 8:59 am
- Location: Oklahoma, USA
- Chris Templeton
- Posts: 2576
- Joined: 25 Sep 2012 4:20 pm
- Location: The Green Mountain State
- Marty Broussard
- Posts: 2378
- Joined: 18 Oct 2002 12:01 am
- Location: Broussard, Louisiana, USA
Chere Tout-Tout……😂😂….seriously, I first learned Cajun Music and it was on an 8-string Fender that my uncle loaned me. That’s a 2-chord song. The guitar was tuned in open G.
On E9th about a year later I learned Danny Boy…pretty sure it was a Sho-Bud course with a LP record. The tab had slants in it instead of using the E to F lever. Looking back I’m thankful because I like slants better and my guitar didn’t have that lever. I’d have been pretty discouraged without that course because I didn’t know anybody who played E9th…..nor any knowledge of intervals, scales, etc…. Next was the Neil Flanz Sho-Bud LP course with the intros and endings. When I played that Memphis Vamp on the bandstand I thought I’d made the big time….😂😂😂😂
On E9th about a year later I learned Danny Boy…pretty sure it was a Sho-Bud course with a LP record. The tab had slants in it instead of using the E to F lever. Looking back I’m thankful because I like slants better and my guitar didn’t have that lever. I’d have been pretty discouraged without that course because I didn’t know anybody who played E9th…..nor any knowledge of intervals, scales, etc…. Next was the Neil Flanz Sho-Bud LP course with the intros and endings. When I played that Memphis Vamp on the bandstand I thought I’d made the big time….😂😂😂😂
"Technique is really the elimination of the unnecessary..it is a constant effort to avoid any personal impediment or obstacle to achieve the smooth flow of energy and intent" Yehudi Menuhin
- Ronnie Boettcher
- Posts: 749
- Joined: 23 Nov 2007 2:33 pm
- Location: Brunswick Ohio, USA
- Slim Heilpern
- Posts: 328
- Joined: 19 Mar 2016 9:18 am
- Location: Aptos California, USA
- Contact:
The first thing I learned was Buddy's first solo on "I'll Be All Smiles Tonight" (by ear) off "The Steel Guitar & Dobro Sounds of Shot Jackson & Buddy Emmons". Five and a half years later I still can't play it as smooth as Buddy, but still tryin'....
- Slim
- Slim
Chromatic Harmonica, Guitar, and Pedal Steel (Williams U12 Series 700, Emmons lap)
http://slimandpenny.com
http://slimandpenny.com
- Fred Treece
- Posts: 3920
- Joined: 29 Dec 2015 3:15 pm
- Location: California, USA
- Edward Dixon
- Posts: 210
- Joined: 19 Apr 2021 9:59 am
- Location: Crestview Florida
- Contact:
Little Wing. Mar 2021
I learned to play Steel Guitar Rag on my dad's Fender 1000 when I was a kid but learned nothing about PSG. 60 years later I actually bought my own steel and started learning the instrument Feb. of this year. The 1st month I learned chords. When I learned how to make a minor chord (A pedal) I taught my self Little Wing because I already knew the chord progression inside and out. It took about an hour to get the chords right. A month later I found out I could also make minor chords with the B+C pedals I tried that and now I mix 'em up and I'm also using the E-Eb KL. It just keeps getting better with this instrument.
Ed
I learned to play Steel Guitar Rag on my dad's Fender 1000 when I was a kid but learned nothing about PSG. 60 years later I actually bought my own steel and started learning the instrument Feb. of this year. The 1st month I learned chords. When I learned how to make a minor chord (A pedal) I taught my self Little Wing because I already knew the chord progression inside and out. It took about an hour to get the chords right. A month later I found out I could also make minor chords with the B+C pedals I tried that and now I mix 'em up and I'm also using the E-Eb KL. It just keeps getting better with this instrument.
Ed
Last edited by Edward Dixon on 15 Aug 2021 9:01 am, edited 1 time in total.
"Faith don't need no second opinion."
-
- Posts: 1107
- Joined: 4 Aug 1998 11:00 pm
- Location: Gillette, WY
- Ken Pippus
- Posts: 2618
- Joined: 8 Feb 2007 7:55 am
- Location: Langford, BC, Canada
- Scott Appleton
- Posts: 1099
- Joined: 24 Mar 2003 1:01 am
- Location: Ashland, Oregon
first song
steel guitar rag
-
- Posts: 678
- Joined: 7 Sep 1998 12:01 am
- Location: portsmouth,r.i. usa
-
- Posts: 2723
- Joined: 22 Jul 1999 12:01 am
- Location: Brooksville Florida
- John Palumbo
- Posts: 479
- Joined: 8 Mar 2010 12:31 pm
- Location: Lansdale, PA.