Light Weight Steel guitar cases
Moderator: Shoshanah Marohn
- Bowie Martin
- Posts: 666
- Joined: 26 Nov 1999 1:01 am
- Location: Wilson, NC USA 27896
Light Weight Steel guitar cases
Does anyone make light weight steel guitar cases? I understand Steve Hinson use to do them (I have had two on order for quite some time from him) but have no indication that I will be getting them. Too bad; understand they are great). I’m 84, still playing, and have a bum shoulder, so I need all the help I can get! Thanks
Emmons LeGrande II D-10, Emmons LeGrande III D-10, Emmons LeGrande III S10, Boss Katana 100, Boss Katana 50, Nashville 112
Peavey PX's Speakers, with Profex II, Nashville 1000,
Peavey PX's Speakers, with Profex II, Nashville 1000,
- Malcolm McMaster
- Posts: 1416
- Joined: 30 May 1999 12:01 am
- Location: Beith Ayrshire Scotland
Scott Dixon, very light weight but sturdy. If just transporting in own vehicle a padded keyboard bag works great.
]
]
MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case.
- Jim Saunders
- Posts: 2836
- Joined: 7 May 1999 12:01 am
- Location: Houston, Texas, U.S.A.
Hey There
You might consider split cases to divide the load. Hatton cases makes good ones and they are listed in the links here on the Forum. You put the body of the guitar in one case and the pedal bar and rods in the other. I notice Mullen now offers split cases as an option now with their guitars.
- Barry Coker
- Posts: 761
- Joined: 22 Jun 2017 9:59 pm
- Location: Bagley Alabama, USA
You might look at a Gator Keyboard case G-PG-49 is what I used with a D10 Carter I had and it worked great guitar fits nicely and this model case has a full length zipper pouch that holds the pedal bar away from the guitar.
Total weight was around 6 pounds
Good luck
Barry
Total weight was around 6 pounds
Good luck
Barry
Zum-D-10, Webb 614-E, 65 Pro Reverb, Evans RE200, 69 Gibson Birdland, 89 Telecaster EAD Bad!!
- Bowie Martin
- Posts: 666
- Joined: 26 Nov 1999 1:01 am
- Location: Wilson, NC USA 27896
Keyboard care for steel!
Thanks guys. Think I’m going to try the Gator Case. Looks good.
Emmons LeGrande II D-10, Emmons LeGrande III D-10, Emmons LeGrande III S10, Boss Katana 100, Boss Katana 50, Nashville 112
Peavey PX's Speakers, with Profex II, Nashville 1000,
Peavey PX's Speakers, with Profex II, Nashville 1000,
- Barry Coker
- Posts: 761
- Joined: 22 Jun 2017 9:59 pm
- Location: Bagley Alabama, USA
- Dan Beller-McKenna
- Posts: 2979
- Joined: 3 Apr 2005 1:01 am
- Location: Durham, New Hampshire, USA
- Contact:
- Lee Baucum
- Posts: 10326
- Joined: 11 Apr 1999 12:01 am
- Location: McAllen, Texas (Extreme South) The Final Frontier
Lee, from South Texas - Down On The Rio Grande
There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.
Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
There are only two options as I see it.
Either I'm right, or there is a sinister conspiracy to conceal the fact that I'm right.
Williams Keyless S-10, BMI S-10, Evans FET-500LV, Fender Steel King, 2 Roland Cube 80XL's,
Sarno FreeLoader, Goodrich Passive Volume Pedals, Vintage ACE Pack-A-Seat
- John Swain
- Posts: 1576
- Joined: 12 Feb 2000 1:01 am
- Location: Newberry,SC