My new Emmons GS-10

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

Bob,Yes it does sound great,Doesn't make sense why?But I'd does sound great.
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
User avatar
Mike DiAlesandro
Posts: 1503
Joined: 8 May 2010 7:36 am
Location: Kent, Ohio
Contact:

Nice!

Post by Mike DiAlesandro »

Stu- nice guitar, and fine looking work by Jon Light adding the 2 knee levers. I am working on a twin to yours.

It was the same color combo, but not in as good shape, so I chose to strip it and found some nice maple grain under the red and black Krylon.

Here is a photo in it’s current state...



Image
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

Image
Image
Picked up the little Emmons from John Light and he did an amazing job on this little wonder, It's grown two more knee levers and sounds incredible...I set it up in my room and I'm thrilled.
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
User avatar
Jon Light
Posts: 13745
Joined: 4 Aug 1998 11:00 pm
Location: Saugerties, NY
Contact:

Post by Jon Light »

This was a super satisfying little job. This little 27 oz. guitar sounds so good! Parts are from Michael Yahl who I thank profusely for A) having them and B) getting them to me really quick.

Mike DiAlesandro -- that is going to look great! Stu's guitar here -- every time you look at it a little more paint flakes off. It's going to be naked soon enough.
User avatar
Jon Light
Posts: 13745
Joined: 4 Aug 1998 11:00 pm
Location: Saugerties, NY
Contact:

Post by Jon Light »

Mike -- when I looked too quickly I thought you posted two pictures very close together, over/under, the second being an apron close-up and I was thinking 'hmmm...this second pic, the wood likes the fir in a 2x4.....?'
Valdi Thorkelsson
Posts: 13
Joined: 18 Mar 2021 7:21 am
Location: Reykjavik, Iceland

Post by Valdi Thorkelsson »

Stu Schulman wrote:Jon Light did an incredible job setting up the "Little Emmons"guitar,and adding two knee levers,I brought it home yesterday,now its 3+3 enough to do what I need it to do.
If I wasn’t up in Iceland I’d ship my GS-10 to Jon in a heartbeat for a complete set up and possibly the addition of another knee lever or two (not that I know how to use them or what I’d do with them yet! :D) - mine is in dire need of a set up and a fresh set of strings...
Steve Hinson
Posts: 3879
Joined: 4 Aug 1998 11:00 pm
Location: Hendersonville Tn USA

Post by Steve Hinson »

These little jewels sound as good as any steel guitar ever sounded.

SH
User avatar
John McClung
Posts: 5106
Joined: 4 Aug 1998 11:00 pm
Location: Olympia WA, USA
Contact:

Post by John McClung »

Stu, my pal Silvio Bello in Torrance had a little G10 and man, the tone and action stunned me! Every bit as great sounding as the pro models, and light as a feather. How you doing these days? I'm up in Olympia, neighbor with Dan Tyack! Never see each other, though.
E9 INSTRUCTION
▪️ If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

John,I'm good talking to chickens,and a cat,not playing much, o complaints...How is You?
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

Johnny Pez,I wrote you an email a while ago but they wanted me to fill out a bunch of stuff?Oh Well?
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
User avatar
john widgren
Posts: 2623
Joined: 24 Nov 1998 1:01 am
Location: Wilton CT

Big Brother is Watching

Post by john widgren »

Very Nice...Congrats! I just finished the big brother to your GS.

Image
Image
Steel Guitar Services:
Live performance and recording. Instruments, repairs and lessons. Fresh bait/discount sushi.
(203) 858-8498
widcj@hotmail.com
User avatar
Dusty Lee Elmer
Posts: 34
Joined: 30 Dec 2020 7:46 am
Location: Ithaca, New York, USA

Post by Dusty Lee Elmer »

Hey Stu! Jon was telling me what a killer guitar this is today when I was picking up the Marrs from him. He let me sit down at his Emmons and needless to say, I have a new ideal pedal steel. He was telling me how great this guitar of yours is. I bet you make her sing too. I’ve been listening to the CD’s you sent me and I’ve been using the picks! Someday I’m hoping to be at Jon’s at the same time as you are!
Dusty Elmer

1980 Dobro D60
Fender B-Bender Clarence White copy Telecaster
+ banjos and mandolins
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

John Widgren,Man that's a beautiful guitar my friend...Dusty,would love to hook up with you at Jon Light's.
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
User avatar
Jon Light
Posts: 13745
Joined: 4 Aug 1998 11:00 pm
Location: Saugerties, NY
Contact:

Post by Jon Light »

Let's make this happen, Stu, Dusty.
And my apologies, Dusty, for giving you that taste of Emmons. That can only make life more complicated.
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

Dusty,To quote John Belushi "I have the time because I'm doing time"
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
Herb Steiner
Posts: 12505
Joined: 4 Aug 1998 11:00 pm
Location: Spicewood TX 78669
Contact:

Post by Herb Steiner »

Jerry Jones wrote:Of course I remember you, Stu. I believe we both knew George Harrington from your Alaska days. BTW, I briefly owned your old round front LDG. Great guitar!
That guitar had a sound like none other, to my ears the quintessential ShoBud sound. I too briefly owned it. There's a story to that guitar, here's my contribution.

A mutual friend of Stu's and mine got the guitar from Stu and played it for quite some time. We'll call him Owner #2. He's a player who's very hard on his equipment and that guitar showed it. He eventually lost it in pawn or something and it disappeared, probably mid-80's I'd say. Anyway, about 10-12 years ago Lloyd Maines called and told me of an old Sho-Bud he looked at but was way beyond his capabilities of making it work, totally trashed, broken pickup, etc. Maybe I could make something of it?

I went to where it was in North Austin. I looked at it and immediately recognized the guitar, and paid $800 for it, which in it's condition, I felt was a lot. I was an Emmons guy but I still had a few old ShoBud parts in the shop, so I dismantled it completely and cleaned as much of the gunk off the undercarriage as I could. Probably put about 5 hours or so into just getting the parts clean, more for the cabinet, and then a total reassembly. I didn't refinish it, however. Marty Muse contributed a correct period SB pickup and I hooked it up.

The sound was astounding, frankly. Very much like Lloyd Green's Fingertip. I compared it to my 1970 Professional and they were totally dissimilar, the LDG easily won IMHO. Think the sound of the Mr. Nashville Sound album. Transparent highs, sweet but never brittle. Nice round midrange. Really a 60's sound to me, not a 1970s.

But as luck would have it, Owner #2 dropped by the house and freaked out: "Man, that's my old guitar! You found my old guitar!! I gotta have it back!" "No, man... I worked my knuckles raw on this one! This one's a keeper." He persisted and so... okay, WTF. I knew he'd get it back anyway. :lol: So he gave me an S-10 PP in white mica and he got the LDG back. The PP S-10 was one that I quickly sold and recouped my expenses, despite feeling the LDG was a lifetime keeper.

Of course, after a few years Owner #2 sold it to Owner #4, and I understand it is now well-loved by Owner #5, also an old friend, and is in the best of hands. The wheel keeps turning.
My rig: Infinity and Telonics.

Son, we live in a world with walls, and those walls have to be guarded by men with steel guitars. Who's gonna do it? You? You, Lt. Weinberg?
User avatar
Jon Light
Posts: 13745
Joined: 4 Aug 1998 11:00 pm
Location: Saugerties, NY
Contact:

Post by Jon Light »

I love when an area, a scene, is tight enough that everyone knows everyone and everyone knows every steel and its backstory.
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

The Lloyd Green guitar?I bought that guitar brand new from "Straight Music"after I got the gig with B.W. Stevenson,I believe it to be the first Lloyd Green model in Austin Texas.I eventually traded to Jerry Blanton towards a Blanton D-10 8+4which is now in New Mexico belonging to Jim Richmond's brother Don Richmond,I played the Lloyd Green on the first ACL show w B.W. Stevenson,YouTube has a clip somewhere?Then the Lloyd Green belonged to Jerry Blanton,Jerry sold it to the player whom Herb speaks of,Then somewhere down the line Jerry Jones owned it"That guitar has the tone and is a very special guitar...It passed through a lot of good players.
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
User avatar
Jack Hanson
Posts: 5024
Joined: 19 Jun 2012 3:42 pm
Location: San Luis Valley, USA

Post by Jack Hanson »

Don Richmond's Blanton D-10 is semi-permanently set up at Don's Howlin' Dog Studio a few miles north of Alamosa, CO.

https://www.howlindogrecords.com/
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

Jack,Thanks for the update about the Blanton,and Don Richmond!
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

Jack,Thanks for the update on Don Richmond,and the Blanton guitar!
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
Pete Burak
Posts: 6530
Joined: 2 Oct 1998 12:01 am
Location: Portland, OR USA

Post by Pete Burak »

I just joined the Emmons GS-10 club :)
Stopped into a shop in Portland that I had never been to, and it turned into a rescue mission :)
So far it plays and sounds and even looks pretty good!

Image
Image
User avatar
Stu Schulman
Posts: 6526
Joined: 15 Oct 1998 12:01 am
Location: Ulster Park New Yawk (deceased)

Post by Stu Schulman »

Pete"Right On"
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
Peter Leavenworth
Posts: 173
Joined: 18 Mar 2011 12:33 pm
Location: Madbury, New Hampshire, USA

Emmons GS-10

Post by Peter Leavenworth »

I have a "bowling ball" early 70's GS-10 which I love for all the above reasons - except I found the volume/tone pots got in the way of my right hand and moved them under the cabinet. Anyone else have that problem?
pete
2008 Zum D-10, 1996 Mullen PRP D-10, 1974 Emmons D-10, 1976 Emmons D-10, early 70s Emmons GS-10, Milkman Sideman head w/Telonics 15" speaker, 1966 Fender Super Reverb, 1970 Fender Dual Showman head, Wechter/Scheerhorn and Beard Dobros, 1962 Supro lap steels, Gibson 1939 RB-11 banjo, Gibson 1978 RB-250
banjo......and way too much more
User avatar
Larry Hopkins
Posts: 531
Joined: 23 Jan 2016 8:42 am
Location: Lubbock Texas USA

Black Rock

Post by Larry Hopkins »

Image [url=https:
Bought this one a few months ago,a LYNN STAFFORD ,setup,smooth :D
Lh
,peavey renown 115,Vegas 400, Peavey envoy, peavy bandit 65 head,baby bloomer
2 -Nashville 400, Emmons SD-10 legrande lll ,Emmons Black Rock ,sho-bud pac a seat,,;
Post Reply