Emmons Lashley LeGrande pedal steel guitars, advice needed

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Post Reply
Peter Lutz
Posts: 4
Joined: 10 Oct 2020 8:21 am
Location: Germany

Emmons Lashley LeGrande pedal steel guitars, advice needed

Post by Peter Lutz »

Hello everybody, thanks for having me here. I am looking for advice regarding two Emmons Lashley LeGrande guitars that I am trying to sell for a friend. He inherited these instruments but, although he plays a little guitar, he has no idea regarding electronics, dating etcetera, so that's why he asked me. By the way, the guitars are located in Hamburg, Germany.

From what I can tell both guitars are in really good shape, and complete. Both are single neck, have three pedals and four knee levers, and come in what appears to be the original case. They're probably LeGrande I models, however I'm not familiar with the ways do identify different models.
I already found out that they both appear to be SD10 models, the blue one (#1069L) was probably produced in 1966, the one with the oak finish (#1141L) in 1967, which seem to make them early Lashley LeGrande guitars.

I have attached a few pictures of both instruments; 7 images of the '66 guitar, and 6 images of the '67 guitar. For anyone interested, I do have more pictures available though.

Any help, tips and advice would be very much appreciated :-)

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
J Fletcher
Posts: 1192
Joined: 4 Aug 1998 11:00 pm
Location: London,Ont,Canada

Post by J Fletcher »

Hi Peter
The LeGrande steels were introduced in 1980 , approximately , and those two steels would be early 90's or so. Seeing as they have the 14 hole bell cranks. Jerry
Peter Lutz
Posts: 4
Joined: 10 Oct 2020 8:21 am
Location: Germany

Post by Peter Lutz »

Hello Jerry, thanks for your reply. Indeed I already noticed the serial numbers don't say too much regarding when an instrument was made, or to which series it belongs. So probably early 90's, thanks. Any suggestion regarding specific model number or specifications, or value?
J Fletcher
Posts: 1192
Joined: 4 Aug 1998 11:00 pm
Location: London,Ont,Canada

Post by J Fletcher »

Those a very nice guitars . What they are worth in Europe and what they would sell for in Canada , where I live , might be two different things. But I would say they are worth about $2750 US$ each . But you should really get a more knowledgeable opinion , they could be worth more than that in Europe . Of course it depends on the condition and playability as well. Jerry
User avatar
Gene Tani
Posts: 1161
Joined: 14 Mar 2019 8:07 pm
Location: Pac NW

Post by Gene Tani »

They are really nice steels.

If you can locate an experienced player to evaluate them local to you, that would be best. You can search Members link above by location. You have to ask around for any parts needed but I just got LLG pedals/cross shafts on US Ebay.

Also, maybe a little cleanup, vacuum the case, go over the pull rods with 0000 synthetic steel wool or something mild to remove spots, etc
- keyless Sonny Jenkins laps stay in tune forever!; Carter PSG
- The secret sauce: polyester sweatpants to buff your picks, cheapo Presonus channel strip for preamp/EQ/compress/limiter, Diet Mountain Dew
Peter Lutz
Posts: 4
Joined: 10 Oct 2020 8:21 am
Location: Germany

Post by Peter Lutz »

Indeed a little cleaning up is always a good thing, and.won't take too much time.
Philipp Friedrich
Posts: 61
Joined: 17 Mar 2010 8:04 am
Location: Germany

Advice needed

Post by Philipp Friedrich »

pm send
User avatar
Lee Warren
Posts: 815
Joined: 4 May 2003 12:01 am
Location: Nashville, Tennessee, USA

Post by Lee Warren »

Hi Peter,
As has been mentioned, Emmons Lashley LeGrande guitars are really good..
I have a D-10 with 8&4 and 14 hole bellcranks, that I purchased brand new in around 1992.
Yours look to have been built around the same time, approximately.
For reference here’s a picture of mine.
Good luck with the sale!
Image
User avatar
Douglas Schuch
Posts: 1390
Joined: 10 Jun 2011 9:33 am
Location: Valencia, Philippines

Post by Douglas Schuch »

I'd price them at 3000 Euros to start, based on what I've seen of EU prices. You can always lower the price, but you can't really raise it! Just my opinion.
Pedal steel, lap steel, resonator, blues harp - why suck at just one instrument when you can do so on many?
Peter Lutz
Posts: 4
Joined: 10 Oct 2020 8:21 am
Location: Germany

Post by Peter Lutz »

Douglas Schuch wrote:I'd price them at 3000 Euros to start, based on what I've seen of EU prices.
Hmm, I don't know. The first one already sold for quite a bit more.
Lynn Martin
Posts: 14
Joined: 27 Mar 2008 2:53 pm
Location: SunPrairie WI 53590 U.S.A.

Post by Lynn Martin »

I have serial number 1035L double10 8&5 purchased from Emmons May 1993
User avatar
Douglas Schuch
Posts: 1390
Joined: 10 Jun 2011 9:33 am
Location: Valencia, Philippines

Post by Douglas Schuch »

Peter Lutz wrote:
Douglas Schuch wrote:I'd price them at 3000 Euros to start, based on what I've seen of EU prices.
Hmm, I don't know. The first one already sold for quite a bit more.
Then you done good! At least I was well above the $2700 USD someone else tossed out (although that was North American price)! Haha! Congrats to your friend. And maybe if I ever need to sell my Millennium, I should fly to Europe with it!
Pedal steel, lap steel, resonator, blues harp - why suck at just one instrument when you can do so on many?
Post Reply