I know it's not pedal steel

Bruce Bouton · Post by **Bruce Bouton** » 7 Sep 2020 2:24 pm

My friend Jesse nester called me and asked if I'd do a virtual lapsteel duet. This is what we got!
DADGAD tuning!
https://www.youtube.com/watch?v=X4y4zNe ... xbtZCZ8TAg

Paul Wade · Post by **Paul Wade** » 7 Sep 2020 2:30 pm

That was great bruce love it man
Let's here moreðŸ˜Š

Bob Womack · Post by **Bob Womack** » 7 Sep 2020 2:57 pm

That was really nice, graceful and tasteful! Tell us about your capos and guitars, please.

Bob

Bob Tuttle · Post by **Bob Tuttle** » 7 Sep 2020 6:00 pm

Very, very nice.

Rich Upright · Post by **Rich Upright** » 8 Sep 2020 12:54 am

Loved it!

Post by **Dave Mudgett** » 8 Sep 2020 1:00 am

Excellent. Hey, lots of us here are not strictly pedal-bound, and even play - gasp - slide guitar.

Kevin Fix · Post by **Kevin Fix** » 8 Sep 2020 2:42 pm

Bruce!! That was awesome!!! Great playing and one heck of a tune. Gave me goose bumps.

Bruce Bouton · Post by **Bruce Bouton** » 8 Sep 2020 5:02 pm

Thank's for the kind words. I used a Lap King Guitar ,built by Jason Dumont. It has two Lollar pickups. There's an oahu copy in the bridge and a goldfoil in the neck position. I recorded my part direct , using a Strymon Iridium as an amp simulator. I forgot what overdrive I used but I did go through a fender mirror image delay and a fender marine layer reverb. Those are both from the new line of Fender pedals. They're incredibly musical.

I tuned to DADGAD then capo'ed to G using a scheerhorn capo.

I recorded to protools using a UA apollo interface and a NEVE channel strip plug in. I was pretty happy with the tone.

Olli Haavisto · Post by **Olli Haavisto** » 9 Sep 2020 7:31 am

Great stuff, Bruce, love it !!

Joe Krumel · Post by **Joe Krumel** » 9 Sep 2020 8:35 am

I am late to the party. Just listened to the track. Very nice. Don't know if it was intended to be, but the song is super relaxing! Love it.thanks for the post.

Allan Thompson · Post by **Allan Thompson** » 10 Sep 2020 10:53 am

Excellent, sounds very Celtic.

john widgren · Post by **john widgren** » 10 Sep 2020 11:38 am

Simply marvelous! Thank you!

Bob Womack · Post by **Bob Womack** » 10 Sep 2020 3:14 pm

Thanks, Bruce for the details! Once again, very nice job!

Bob

Jacek Jakubek · Post by **Jacek Jakubek** » 14 Sep 2020 2:27 am

Nice tune and playing. The song's chords remind me a bit of the song "Temple of the King" by the rock band Rainbow (Which has a slide guitar solo by Ritchie Blackmore, I think.)

Bob Womack wrote: Tell us about your capos and guitars, please.

The other player's lap steel capo looks like "Charlie's Slide Pro Capo." I've heard that it's THE best capo for steel. I've been meaning to get one (or a few if they're really that good) for a while.
He can make you a longer, custom one for pedal steel for 10,11,14 strings, whatever you need. https://charliescapo.com

Gary Cosden · Post by **Gary Cosden** » 15 Sep 2020 5:22 am

Very nice indeed.

Jesse Nestor · Post by **Jesse Nestor** » 15 Sep 2020 8:42 am

Hi everybody, I'm brand new to the forum here, just joined! My name is Jesse Nestor and I'm the other lap steel player in the video with Bruce. Thank you so much for having me here, it's an honor to talk with so many great steel players!

I'm from Canada and have been based in Nashville over the past year. I wanted to thank you all so very much for the very kind words on the tune, I'm so glad you enjoyed it! It was a real sincere pleasure to get to work with Bruce on it!

Jesse Nestor · Post by **Jesse Nestor** » 15 Sep 2020 8:56 am

Jacek Jakubek wrote:Nice tune and playing. The song's chords remind me a bit of the song "Temple of the King" by the rock band Rainbow (Which has a slide guitar solo by Ritchie Blackmore, I think.)

Bob Womack wrote: Tell us about your capos and guitars, please.
The other player's lap steel capo looks like "Charlie's Slide Pro Capo." I've heard that it's THE best capo for steel. I've been meaning to get one (or a few if they're really that good) for a while.
He can make you a longer, custom one for pedal steel for 10,11,14 strings, whatever you need. https://charliescapo.com

Thank you so much for the kind words Jacek, I really appreciate that! I actually haven't heard Temple of the King but I should have a listen to it!

You're absolutely right it is a Charlie's Slide Pro capo I have. I've had it for a couple years now. I was looking for a capo that didn't kill the tone when in use, and I have been completely impressed. It's quite heavy, and the tone sounds just as good (maybe even better sometimes!) as without a capo. It was by far the best thing I tried, but I didn't get to try the Scheerhorn one that Bruce has. His tone was awesome so I'm sure it's great too!

My Charlie's has been coming a little loose lately, slipping sometimes while playing, but I remember Charlie making a video explaining that the tube underneath may wear out. You can replace it at any hardware store! I'll have to look into it and see if that's what it is. But Charlie has awesome service and is a super nice guy!

Jesse Nestor · Post by **Jesse Nestor** » 15 Sep 2020 9:07 am

Bob Womack wrote:That was really nice, graceful and tasteful! Tell us about your capos and guitars, please.

Bob

Hi Bob, thank you so much for the kind words!

I used my Supro Airliner steel (dated sometime '64-'68 according to the serial number). It has the original string-through pickup, and the three legs in the case. I love that guitar, it's been my main steel for a few years! My capo is a Charlie's Slide Pro capo which I love.

I played that through a Marshall JTM 45 clone, built by a guy named Steve Moratto here in Canada, with an Analogman King of Tone pedal and some reverb and delay (Boss DD-20, Strymon Timeline and Neunaber Immerse). Recorded the amp direct through a Suhr Reactive Load with an IR (simulation of a Celestion Vintage 30) in Pro Tools.

Ron Funk · Post by **Ron Funk** » 15 Sep 2020 7:14 pm

Hi Bruce and Jesse -

Contact Robert Plant for some supplemental vocals and your new trio is ready to take it to the masses

Best regards

Ron

Doug Earnest · Post by **Doug Earnest** » 16 Sep 2020 5:32 pm

Jesse and Bruce, that is a really good catchy tune! I like Ron Funk's suggestion of Robert Plant laying down a vocal too.......and I just bet he would do it.

Thanks guys, please let us have (or sell us!!) some more when you are ready/

Mike Perlowin · Post by **Mike Perlowin** » 18 Sep 2020 2:22 pm

That's terrific. Makes me want to take up the lap steel.

Jesse Nestor · Post by **Jesse Nestor** » 19 Sep 2020 7:24 am

Doug Earnest wrote:Jesse and Bruce, that is a really good catchy tune! I like Ron Funk's suggestion of Robert Plant laying down a vocal too.......and I just bet he would do it.

Thanks guys, please let us have (or sell us!!) some more when you are ready/

Hey Doug, thank you very much! That could be cool to have Robert Plant sing on it. I unfortunately don't have his number!

Thank you so much for the kind words everybody, would love to do more and will definitely keep you posted!

Dale Rottacker · Post by **Dale Rottacker** » 19 Sep 2020 9:29 am

Very cool Bruce

Bruce Bouton · Post by **Bruce Bouton** » 22 Sep 2020 8:27 pm

Thank's everyone for the kind words. thank's to jesse for writing the tune and talking me into doing my first virtual duet !

The Steel Guitar Forum

I know it's not pedal steel

I know it's not pedal steel

Topic: I know it's not pedal steel

Re: I know it's not pedal steel

Love it