A More Compact Tablature Holder

New products of interest to steel guitarists
Post Reply
Tom Bradshaw
Posts: 835
Joined: 4 Aug 1998 11:00 pm
Location: Walnut Creek, California, USA
Contact:

A More Compact Tablature Holder

Post by Tom Bradshaw »

I have added a half-sized model of my "Tab Rack" to my list of products. It can be viewed at http://www.songwriter.com/bradshaw/tab_rack.php

I had received suggestions for this style of music holder from several players who wanted a smaller holder for their play-list or chord chart at gigs. So, do give it a look. ...Tom
User avatar
Ken Byng
Posts: 4313
Joined: 19 Feb 2001 1:01 am
Location: Southampton, England

Post by Ken Byng »

Love it! :D
Show Pro D10 - amber (8+6), MSA D10 Legend XL Signature - redburst (9+6), Infinity SD10 (4+5) Sho-Bud Pro 111 Custom (8+6), Emmons black Push-Pull D10 (8+5), Zum D10 (8x8), Hudson pedal resonator. Telonics TCA-500, Webb 614-E,
User avatar
Al Evans
Posts: 523
Joined: 30 Dec 2017 3:16 pm
Location: Austin, Texas, USA

Post by Al Evans »

Just ordered one! Tom, I notice you have a gmail address. If you don't see my email, be sure and check your junk/spam folder. Sometimes, gmail doesn't like me.

--Al Evans
2018 MSA Legend, 2018 ZumSteel Encore, 2015 Mullen G2, G&L S-500, G&L ASAT, G&L LB-100, Godin A4 Fretless, Kinscherff High Noon
User avatar
Charley Bond
Posts: 915
Joined: 4 Aug 1998 11:00 pm
Location: Inola, OK, USA

Tab Rack...

Post by Charley Bond »

I have a Tab Rack & it is the best accessory I have, the other side of my White Zircon Bar...
Steel Guitar players are members of a Special Family
User avatar
Kerry Johnson
Posts: 391
Joined: 26 Jan 2001 1:01 am
Location: the Bay Area, CA
Contact:

Post by Kerry Johnson »

Nice !!!

Thanks Tom, great
Dick Chapple Sr
Posts: 1145
Joined: 5 Feb 2010 6:53 pm
Location: Hardin Montana, USA

Half size tab rack

Post by Dick Chapple Sr »

Hi Tom:
Sure nice to see your post.
I have 3 of your great full size racks.
The half size looks like a real winner.
Is the one clip for it the same as the clips for the full rack? Does the half rack clip stay put somehow at the 45 degrees in the corner? Just wondering how it keeps from swinging from side to side.
I don't suppose it is an issue but I am curious as I probably will order one. :) :) :)
Dick
Tom Bradshaw
Posts: 835
Joined: 4 Aug 1998 11:00 pm
Location: Walnut Creek, California, USA
Contact:

Answering Dick's Questions

Post by Tom Bradshaw »

Thanks for the questions, Dick.

1. The plastic leg-holding clip is identical to those of the full Tab Rack. When snapped into position, it securely presses the metal frame (the Rack holder) against the front edge of the end plate exactly as the full Tab Rack does.
2. The 45° angle is achieved by how the Rack itself is positioned on the top edge of the leg holder. When positioned at a 45° angle, it assumes a perfect horizontal position.
3. The Rack would only "swing" if not tighten sufficiently to the top edge of the holding clip. Since the holder is made of brushed aluminum, there is a natural "gripping" tendency between the Rack and the top edge of the holder.

The "Junior" Rack will hold half as much as the full Tab Rack.
User avatar
Al Evans
Posts: 523
Joined: 30 Dec 2017 3:16 pm
Location: Austin, Texas, USA

Post by Al Evans »

I got mine a couple of days ago, and it sure simplifies my setup. Before, I was using a music holder clamped onto a mic stand, which would barely fit into the space I had for it.

Image

Now, there's just a small music stand clamped to the leg of my pedal steel.

Image

(The light I had on the old one seemed too big and clunky, so I got a smaller one.)

It is really an admirably simple device, some of the best minimalist engineering I've ever seen! This is all there is!

Image

Thank you, Tom!

--Al Evans
2018 MSA Legend, 2018 ZumSteel Encore, 2015 Mullen G2, G&L S-500, G&L ASAT, G&L LB-100, Godin A4 Fretless, Kinscherff High Noon
Tom Bradshaw
Posts: 835
Joined: 4 Aug 1998 11:00 pm
Location: Walnut Creek, California, USA
Contact:

Important notice!

Post by Tom Bradshaw »

Hey Al. As I told you, with the "Junior" music rack, you must be duplicating all of Buddy's licks within a week! If not, the Junior is defective and must be returned for a refund!!!! ...Tom
User avatar
Elias Quirino
Posts: 70
Joined: 7 May 2020 1:18 pm
Location: North Carolina, USA

Post by Elias Quirino »

Image Image I own the full size and I love it. I ordered the Jr. today! I'll post a pic when it arrives. Awesome product! Thanks Tom!

It arrived today! Got it set up in minutes. Just what I needed! Thanks Tom!
Now time to practice. LOL!
Last edited by Elias Quirino on 13 Jul 2020 3:09 pm, edited 3 times in total.
Dick Chapple Sr
Posts: 1145
Joined: 5 Feb 2010 6:53 pm
Location: Hardin Montana, USA

Junior Rack

Post by Dick Chapple Sr »

Good evening Tom.

I sent an email earlier today to order a Jr Rack.
It will be very useful.
:) :) :)
Dick
User avatar
Elias Quirino
Posts: 70
Joined: 7 May 2020 1:18 pm
Location: North Carolina, USA

Post by Elias Quirino »

Posted pics of my new Tab Jr I received yesterday!
Look above.
Kenneth Kotsay
Posts: 953
Joined: 8 Jan 2000 1:01 am
Location: Davie/Ft Lauderdale, Florida
Contact:

Post by Kenneth Kotsay »

How about a Lap Top computer holder?
Post Reply