New Hudson PR10 pedal steel guitar 18.5 Lbs set up
-
- Posts: 1475
- Joined: 18 Jan 2014 5:06 pm
- Location: North Carolina, USA
- Contact:
New Hudson PR10 pedal steel guitar 18.5 Lbs set up
This is the new Hudson PR10 pedal steel guitar.
Yes the work bench is a mess.
Available built to order. Real Tiger Maple Hardwood cabinet. Available Natural with Clear coat and in Black Cherry stain. As well as other stain colors.
Features: E9th setup standard 3 floor pedals and 4 knee levers Only.
Standard 10 String spacing at Changer and roller nut.
Pull Release Changer
Square legs with one adjustable leg.
Grover tuning keys.
Bl 705 pickup
Tiger Maple wood Cabinet. (Real wood)
Hard Maple Key head
Maple Neck
Cross fret markers are standard. I have many other styles in stock that can be ordered per your liking.
This is a well built guitar that stays in tune. All quality parts used throughout the guitar.
The guitar weighs 18.5 Lbs So it is easy on you back to transport to your upstairs high paying gigs.
Available shipped in shipping crate that can be made into a case for $1495.00 plus shipping.
A hard case can be purchased at time of guitar order for $259.95
Color Stains available are Blue, Black and Black Cherry.
Stain colors are No extra charge till end of year.
Most orders filled within 3 to 4 weeks.
Custom built by hudsonsteelguitars.com 704-986-6481
Thanks for looking and I look forward to building you one.
Yes the work bench is a mess.
Available built to order. Real Tiger Maple Hardwood cabinet. Available Natural with Clear coat and in Black Cherry stain. As well as other stain colors.
Features: E9th setup standard 3 floor pedals and 4 knee levers Only.
Standard 10 String spacing at Changer and roller nut.
Pull Release Changer
Square legs with one adjustable leg.
Grover tuning keys.
Bl 705 pickup
Tiger Maple wood Cabinet. (Real wood)
Hard Maple Key head
Maple Neck
Cross fret markers are standard. I have many other styles in stock that can be ordered per your liking.
This is a well built guitar that stays in tune. All quality parts used throughout the guitar.
The guitar weighs 18.5 Lbs So it is easy on you back to transport to your upstairs high paying gigs.
Available shipped in shipping crate that can be made into a case for $1495.00 plus shipping.
A hard case can be purchased at time of guitar order for $259.95
Color Stains available are Blue, Black and Black Cherry.
Stain colors are No extra charge till end of year.
Most orders filled within 3 to 4 weeks.
Custom built by hudsonsteelguitars.com 704-986-6481
Thanks for looking and I look forward to building you one.
Last edited by Jimmie Hudson on 2 Mar 2020 6:43 pm, edited 4 times in total.
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
-
- Posts: 1475
- Joined: 18 Jan 2014 5:06 pm
- Location: North Carolina, USA
- Contact:
Tone
Thanks Johnie, It sounds real good. Got great tone and sustain.Johnie King wrote:Nice steel if this sounds half as good as the Hudson 6 string Hudson steel I had it should be a killer steel for sure.
-
- Posts: 1475
- Joined: 18 Jan 2014 5:06 pm
- Location: North Carolina, USA
- Contact:
Pr10
PR10 Up
- Stu Schulman
- Posts: 6526
- Joined: 15 Oct 1998 12:01 am
- Location: Ulster Park New Yawk (deceased)
Thanks sweet looking guitar!
Steeltronics Z-pickup,Desert Rose S-10 4+5,Desert Rose Keyless S-10 3+5... Mullen G2 S-10 3+5,Telonics 206 pickups,Telonics volume pedal.,Blanton SD -10,Emmons GS_10...Zirctone bar,Bill Groner Bar...any amp that isn't broken.Steel Seat.Com seats...Licking paint chips off of Chinese Toys since 1952.
- Dennis Detweiler
- Posts: 3488
- Joined: 8 Dec 1998 1:01 am
- Location: Solon, Iowa, US
Can it be built for a left leg amputee with Jimmy Day setup C B A for right foot? Pedals as far to the right side as possible? Extra cost?
1976 Birdseye U-12 MSA with Telonics 427 pickup, 1975 Birdseye U-12 MSA with Telonics X-12 pickup, Boss 59 Fender pedal for preamp, NDR-5 Atlantic Delay & Reverb, two Quilter 201 amps, 2- 12" Eminence EPS-12C speakers, ShoBud Pedal, 1949 Epiphone D-8. Revelation preamp into a Crown XLS 1002 power amp.
-
- Posts: 1475
- Joined: 18 Jan 2014 5:06 pm
- Location: North Carolina, USA
- Contact:
day setup
Yes I can do it custom for you. No extra cost to move pedals and do day setup.Dennis Detweiler wrote:Can it be built for a left leg amputee with Jimmy Day setup C B A for right foot? Pedals as far to the right side as possible? Extra cost?
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
-
- Posts: 1475
- Joined: 18 Jan 2014 5:06 pm
- Location: North Carolina, USA
- Contact:
Thanks
Thanks JohnieJohnie King wrote:Wow finally a very good ten string four knee 3 pedal Hudson steel I guarantee this steel has incredible tone an playability .
-
- Posts: 1475
- Joined: 18 Jan 2014 5:06 pm
- Location: North Carolina, USA
- Contact:
ttt
ttt
-
- Posts: 43
- Joined: 8 Dec 2015 1:36 pm
- Location: Kentucky, USA
-
- Posts: 1475
- Joined: 18 Jan 2014 5:06 pm
- Location: North Carolina, USA
- Contact:
t
Thanks Randy, I can add the 4th knee lever for you.Randy Major wrote:I'm still playing a SD 10 Jimmy built for me. I'm amazed at how smooth the moving parts are and this thing flat stays in tune. Beautiful tone too. The only thing I wish I had was the 4th KL. I've had the guitar for about 3 years now and it is a jewel. Thanks Jimmy
- Jeremy King
- Posts: 74
- Joined: 9 Jan 2020 5:06 pm
- Location: Rochelle, GA, USA
-
- Posts: 1475
- Joined: 18 Jan 2014 5:06 pm
- Location: North Carolina, USA
- Contact:
thanks
You can play them well too.Jeremy King wrote:Love my 6 and 10 string Hudson Pedal Steels!