please close

[Jeff Savage]

Got them,,,please clos

[Bill Ford]

Jeff, Do you want spring pins, or dowel pins, I have seen spring pins used, and I have several 1/16 spring pins that I can send you. What length?

[Jeff Savage]

the machinist that made the fingers said that I need 1/2" x 0.625" ...he said case hardened steel...most anyone that knows about steels would know more than I do...but if they would work I'd buy some from you, thanks, I really appreciate your help.

[Bobby D. Jones]

JEFF Just to inform you, 1/16 is .0625. Not 0.625 as you posted, That is 5/8". That decimal in the wrong place could cause you some grief. Good Luck on this project.

[Jeff Savage]

Thanks Bobby, not sure how to edit my post but I appreciate you letting me know about that.

[Bill Ford]

Mike Cass. 615-446-5953. He will probably have exactly what you need.

BF

[Ian Worley]

The spring pins Bill mentioned above are what you need, like these: https://www.mcmaster.com/90692a086

[Jeff Savage]

Thanks, i'll see if I can find those locally

[Johnie King]

These folks usually have dowell pins in stock.

[Lynn Stafford]

Jeff,

You should be able to find some solid steel pins locally at most any good hardware store. I'd stay away from from using spring pins if I were you.