| Author |
Topic: recomendation for tuning machines |
Steve Hudson
From:
weymouth Massachusetts, USA
|
Posted 3 Mar 2019 5:27 pm |
|
hi all, been enjoying my carter starter and one of the tuning machines has a real big dead spot in it so you can go almost 3/4 of s turn without it moving anything at all, and of course its right where you want it. so im gonna have to replace it i guess, any recommendations for that and do you need special sized tuning machines or just standard tuning machines.
on a side note, can you use locking tuners on a pedal steel? |
|
|
|
Bob Sykes
From:
North Carolina
|
Posted 3 Mar 2019 7:11 pm
|
|
I got some 0935 Economy Covered Gear 3+3 Tuners from StewMac about 2 years ago for $22 a set. (2 sets gives you a spare LH & RH). They are a direct replacement but only slightly better than the originals. Of course StewMac has lots of better tuners for any budget...
_________________
Carters Starter, D10 8+7, SD10, Chandler RH-2, Rogue RLS-1
ISO Sustainus Ad Infinitum |
|
|
|
Steve Hudson
From:
weymouth Massachusetts, USA
|
Posted 3 Mar 2019 8:34 pm
|
|
| Bob Sykes wrote: |
| I got some 0935 Economy Covered Gear 3+3 Tuners from StewMac about 2 years ago for $22 a set. (2 sets gives you a spare LH & RH). They are a direct replacement but only slightly better than the originals. Of course StewMac has lots of better tuners for any budget... |
so just standard tuners then, okay great i wasnt sure if they were different sized etc. |
|
|
|
Tony Prior
From:
Charlotte NC
|
Posted 4 Mar 2019 12:53 am
|
|
measure the shaft length and the shaft diameter first. They are all not the same !
_________________
Emmons L-II , Fender Telecasters, B-Benders , Eastman Mandolin ,
Pro Tools 12 on WIN 7 !
jobless- but not homeless- now retired 9 years
CURRENT MUSIC TRACKS AT > https://tprior2241.wixsite.com/website |
|
|
|
Bob Sykes
From:
North Carolina
|
Posted 4 Mar 2019 2:48 pm
|
|
Words of wisdom from Tony. The ones I mentioned above are same shaft L/D as the originals. Even the mounting screw holes line up, so no drilling necessary. If you upgrade to some better tuners, check the measurements first.
_________________
Carters Starter, D10 8+7, SD10, Chandler RH-2, Rogue RLS-1
ISO Sustainus Ad Infinitum |
|
|
|
