What’s your favorite steel amp?
Moderator: Shoshanah Marohn
-
- Restricted
- Posts: 4839
- Joined: 4 Apr 2005 12:01 am
- Location: Seminary, Mississippi, USA (deceased)
Psg
I like the " Tommy Huff amps." Got two.
-
- Posts: 8
- Joined: 14 Dec 2018 1:16 pm
- Location: Billerica Massachusetts
Stereo Steel for.about thel last 7 years. Amps that I had in the past that that I wished I still had was an old twin with JBLs and old supper reverb converted to a twin with 15in. JBL.
Carter U12 7&5 Carter LE U12 7&6 Stereo steel amp.w/ twin 15in. Cabs (WeberNeo spks ) Fractal Ax-FX II . G&L S 500 2004 anniversary 54 Strat
-
- Posts: 6965
- Joined: 26 Dec 2003 1:01 am
- Location: Candor, New York, USA
Still can't beat the sound of a Fender IMHO... Actually, although they don't have as much power as the Showman/Twin amps, I have always thought the 40-50 watt fender amps had a sweeter sound for pedal steel, just not enough headroom for some unless miked...
over the decades I have had everything Fender has ever made on the back end of my steels signal chain at one time or another, Showman/Twin Reverb /Bandmaster/Bassman/Tremolux/Bassman70/PA100/Super Reverb/Super Twin Reverb/ Fender 75/Fender 140/Deluxe Reverb/Princeton/Bandmaster Reverb,, etc etc.
They were all either great/good/fair/lousy.
I have always liked late 60's Silverface 40-50 watt amps better for steel as far as pure tone.. can't say why...Blackface amps are better for guitar, but to me not for steel, although thats what I usually used as I always played both on stage, and opted for the BF sound for 6 string...
To my ears I had 2 amps that just had a Fender "steel" sound that was incomparable-a 1971 Super reverb, and a 1970 Bassman head..
Those amps were just magic tonally for pedal steel, never heard anything as good for me personally.
The Fender 40 watt amps that use a rectifier tube- Super Reverb/Tremolux/Pro Reverb etc have always sounded nicer for pedal steel to my ears.. They don't have the headroom some guys need, but IMHO, no other amp tone compares for pure lovely tone... bob
over the decades I have had everything Fender has ever made on the back end of my steels signal chain at one time or another, Showman/Twin Reverb /Bandmaster/Bassman/Tremolux/Bassman70/PA100/Super Reverb/Super Twin Reverb/ Fender 75/Fender 140/Deluxe Reverb/Princeton/Bandmaster Reverb,, etc etc.
They were all either great/good/fair/lousy.
I have always liked late 60's Silverface 40-50 watt amps better for steel as far as pure tone.. can't say why...Blackface amps are better for guitar, but to me not for steel, although thats what I usually used as I always played both on stage, and opted for the BF sound for 6 string...
To my ears I had 2 amps that just had a Fender "steel" sound that was incomparable-a 1971 Super reverb, and a 1970 Bassman head..
Those amps were just magic tonally for pedal steel, never heard anything as good for me personally.
The Fender 40 watt amps that use a rectifier tube- Super Reverb/Tremolux/Pro Reverb etc have always sounded nicer for pedal steel to my ears.. They don't have the headroom some guys need, but IMHO, no other amp tone compares for pure lovely tone... bob
I'm over the hill and hittin'rocks on the way down!
no gear list for me.. you don't have the time......
no gear list for me.. you don't have the time......
-
- Posts: 46
- Joined: 17 Jun 2017 3:55 pm
- Location: Maryland, USA
- Kenneth Cartright
- Posts: 678
- Joined: 21 Nov 2012 11:28 pm
- Location: Missouri, USA
Amp
Quilter Steelaire and Milkman The Amp. Like both real well.
Promat D10, Goodrich, Milkman
NV 400 Amps
NV 400 Amps
-
- Posts: 1759
- Joined: 9 Sep 2009 3:47 pm
- Location: Madison, TN
-
- Posts: 1734
- Joined: 8 Jun 2001 12:01 am
- Location: Houston, Texas, USA
-
- Posts: 763
- Joined: 10 Oct 2016 3:07 pm
- Location: Illinois, USA
- Dale Rottacker
- Posts: 3513
- Joined: 3 Aug 2010 6:49 pm
- Location: Walla Walla Washington, USA
- Contact:
For the money, I really don’t think you can go wrong with a Peavey Session 400 or 500, accept for the weight.
For a Rackmount I love the Quilter Steelaire... maybe one of the best “Live†sounds ... and one of the best onboard Reverbs I’ve heard.
My favorite “right†now is the Telonic’s 500C Super Twin 212... A little tricky setting up, but Dave writes the best Manual's HANDS DOWN of any I’ve read, and once set up, for recording this has the best DI I’ve heard, I’ve heard more than a few “Professionals†say that these amps have a lot of MOJO... Very Transparent... what you hear out of the amp is what you're recording.
For a Rackmount I love the Quilter Steelaire... maybe one of the best “Live†sounds ... and one of the best onboard Reverbs I’ve heard.
My favorite “right†now is the Telonic’s 500C Super Twin 212... A little tricky setting up, but Dave writes the best Manual's HANDS DOWN of any I’ve read, and once set up, for recording this has the best DI I’ve heard, I’ve heard more than a few “Professionals†say that these amps have a lot of MOJO... Very Transparent... what you hear out of the amp is what you're recording.
Dale Rottacker, Steelinatune™
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
*2021 MSA Legend, "Jolly Rancher" D10 10x9
*2021 Rittenberry, "The Concord" D10 9x9
*1977 Blue Sho-Bud Pro 3 Custom 8x6
https://msapedalsteels.com
http://rittenberrysteelguitars.com
https://www.telonics.com/index.php
https://www.p2pamps.com
https://www.quilterlabs.com
- Murray McDowall
- Posts: 101
- Joined: 22 Jun 2001 12:01 am
- Location: Warrnambool, Victoria, Australia
-
- Posts: 2136
- Joined: 11 Jul 2001 12:01 am
- Location: New Orleans, LA, USA
1. Telonics.
2. Blackface twin with 15†Altec
3. WEBB
I had others that were great. I liked the Steelaire and Milkman as well.
Sorry, but no “ best†, it depends on the sound you like and what you need. Budget may be an issue, or weight.
I really like the throw and go aspect. One power cord, no gizmo boxes on the floor. Fast set up, fast escape.
2. Blackface twin with 15†Altec
3. WEBB
I had others that were great. I liked the Steelaire and Milkman as well.
Sorry, but no “ best†, it depends on the sound you like and what you need. Budget may be an issue, or weight.
I really like the throw and go aspect. One power cord, no gizmo boxes on the floor. Fast set up, fast escape.
My fav is the THD BiValve-30. It is a single-ended Class-A amplifier head with dual output tubes that can be switched among many octal-based power tubes for different tones. And, you do not have to re-bias the amp. The two output tubes do not need to be matched in any way and you are free to experiment with any combination you want! Likewise, the two preamp tubes can be any combination of 12AX7, 12AT7, 12AU7, 12AY7,12AZ7, et cetera. I play through a BW 15 mounted in a Sessions 400, which is my second favorite.
blah, blah, blah.
Hey You Kids! Get Off My Lawn!
blah, blah, blah.
Hey You Kids! Get Off My Lawn!
blah, blah, blah.
-
- Posts: 3691
- Joined: 23 Feb 2002 1:01 am
- Location: Limestone, TN, USA
what's your favorite steel amp
Evans and Stereo Steel.
-
- Posts: 2207
- Joined: 6 Jan 2003 1:01 am
- Location: Virginia, USA
-
- Posts: 69
- Joined: 23 Jan 2019 8:06 pm
- Location: Arizona, USA
Amp
My main practice amp is a FENDER CHAMP custom box with a 12" CELESTION BLUE.fantastic sound.
I do have a MARSHALL JMP WITH A 1970 MARSHALL4X12 for put em on there knees sound.
I do have a MARSHALL JMP WITH A 1970 MARSHALL4X12 for put em on there knees sound.
-
- Posts: 69
- Joined: 23 Jan 2019 8:06 pm
- Location: Arizona, USA
Amp
My main practice amp is a FENDER CHAMP custom box with a 12" CELESTION BLUE.fantastic sound.
I do have a MARSHALL JMP WITH A 1970 MARSHALL4X12 for put em on there knees sound.
I do have a MARSHALL JMP WITH A 1970 MARSHALL4X12 for put em on there knees sound.
-
- Posts: 448
- Joined: 28 Sep 2009 2:49 pm
- Location: North Carolina, USA 28681
- Johnie King
- Posts: 8538
- Joined: 7 Apr 2014 11:09 am
- Location: Tennessee, USA
-
- Posts: 1438
- Joined: 19 Mar 2003 1:01 am
- Location: Gaspe, Quebec, Canada
- Contact:
- Dave Mudgett
- Moderator
- Posts: 9648
- Joined: 16 Jul 2004 12:01 am
- Location: Central Pennsylvania and Gallatin, Tennessee
For me, this choice depends heavily on the application.
Pedal steel:
For a louder stage, by far, blackface or '67-69 drip-panel Twin Reverb (they're a bit different). I also really like my old Session 400 with a 12" Telonics speaker.
For a relatively quiet stage or recording, I still like a Deluxe or Princeton Reverb, either blackface or silverface, with a JBL. Right now I have a D120F in the Deluxe Reverb, and a M-series JBL in the Princeton Reverb. Princeton probably too lite for deep C6, but for E9 I like it at lower volumes. For my current bands, I am mostly using the Deluxe for gigs, but sometimes Princeton for real quiet gigs or recording.
Console or lap steel:
The Deluxe or Princeton Reverbs sound great. But probably given my druthers, I really like my '53 wide-panel 5C4 tweed Fender Pro or '54 wide-panel 5D3 tweed Deluxe.
There are lots of other good choices, but another consideration for me is how it works for guitar, and for me, it's hard to beat the versatility of old Fenders.
Pedal steel:
For a louder stage, by far, blackface or '67-69 drip-panel Twin Reverb (they're a bit different). I also really like my old Session 400 with a 12" Telonics speaker.
For a relatively quiet stage or recording, I still like a Deluxe or Princeton Reverb, either blackface or silverface, with a JBL. Right now I have a D120F in the Deluxe Reverb, and a M-series JBL in the Princeton Reverb. Princeton probably too lite for deep C6, but for E9 I like it at lower volumes. For my current bands, I am mostly using the Deluxe for gigs, but sometimes Princeton for real quiet gigs or recording.
Console or lap steel:
The Deluxe or Princeton Reverbs sound great. But probably given my druthers, I really like my '53 wide-panel 5C4 tweed Fender Pro or '54 wide-panel 5D3 tweed Deluxe.
There are lots of other good choices, but another consideration for me is how it works for guitar, and for me, it's hard to beat the versatility of old Fenders.
I have that setup also, and I completely agree. It's too much for the bands I'm in right now, but if I had to contend with a loud band, it would probably get more use.Sound wise the Sarno Revelation Tube Pre-amp through a TC Furlong Split cab was super sweet rig also.
- Ken Metcalf
- Posts: 3575
- Joined: 21 Oct 2005 12:01 am
- Location: San Antonio Texas USA
- Contact:
-
- Posts: 62
- Joined: 4 Aug 1998 11:00 pm
- Location: Talladega, Alabama
What’s your favorite steel amp?
I've owned and and played through a lot of steel amps, but the best for me is the original Peavey Session 400. I also have a LTD 400 and it also is a great sounding amp.