*I'm an idiot*
Moderator: Shoshanah Marohn
-
Andrew Wright
- Posts: 180
- Joined: 21 Jun 2014 8:00 am
- Location: Indiana, USA
*I'm an idiot*
I didn't realize the Zum Encore lift kit was easily removable - please close the thread, and thanks!
Last edited by Andrew Wright on 29 Mar 2018 3:11 am, edited 1 time in total.
-
Brian Coulson
- Posts: 76
- Joined: 8 Aug 2017 11:46 am
- Location: Hawaii, USA
Hi Andrew:
I have an Encore with the lift kit. You should be able to shorten the legs by removing the plastic orange spacer in the legs. Try opening up the ends of the legs to remove the plastic spacer. As far as the rods, they are prob too long and you may need to order shorter ones from Doug. But try shortening the legs first to see if you can make it work for you.
I have an Encore with the lift kit. You should be able to shorten the legs by removing the plastic orange spacer in the legs. Try opening up the ends of the legs to remove the plastic spacer. As far as the rods, they are prob too long and you may need to order shorter ones from Doug. But try shortening the legs first to see if you can make it work for you.
-
Derrick Unger
- Posts: 252
- Joined: 31 Jan 2016 8:24 pm
- Location: Newark Ohio, USA
pedal rods
I might add you might be able to use all-thread from your local hardware...dirt cheap... for your pedal rods...probably less than $10...I've done this on several steels.
Music is good for the soul..playing it is even better! Gretsch6strLapSteel*PeaveyNashville400*HudsonSD-10*DigitechRP360*FenderChampion100*PeaveyKB300*Goodrich120*Behringerx1204*BehringerMini4*Mullen S10"Discovery"*Peavey Vegas400*Princeton112plus*SuperChampX2*SidekickReverb65*Rumble100*MarshallMG50DFX*Nashville112