Portland Steel Jam this spring/summer?

Upcoming steel guitar shows, concerts, jam sessions, club dates, etc.

Moderator: Dave Mudgett

Post Reply
User avatar
Andy DePaule
Posts: 2576
Joined: 20 Jun 1999 12:01 am
Location: Saigon, Viet Nam & Springfield, Oregon
Contact:

Portland Steel Jam this spring/summer?

Post by Andy DePaule »

About the Portland Steel Jam this spring or summer....
Does anyone know if it will be done again?
If yes, When?
Went to one a while back and there were some very good players and great music with a good band too.
Sure be nice to catch it again.
Thanks,
Andy
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project.
User avatar
Ken Pippus
Posts: 2618
Joined: 8 Feb 2007 7:55 am
Location: Langford, BC, Canada

Post by Ken Pippus »

Spoke to Larry the other day. Venue is shut down during the spring window. Will likely have another jam in the fall.

Shame to miss one. Those are often the high point of my month.
User avatar
Andy DePaule
Posts: 2576
Joined: 20 Jun 1999 12:01 am
Location: Saigon, Viet Nam & Springfield, Oregon
Contact:

Thanks Ken

Post by Andy DePaule »

Thanks Ken,
Agree it would have been nice.
Andy
Inlaid Star Guitar 2006 by Mark Giles. SD-10 4+5 in E9th; http://luthiersupply.com/instrument-gallery.html
2017 Mullen SD-10, G2 5&5 Polished Aluminum covering. Custom Build for me. Great Steel.
Clinesmith Joaquin Murphy style Aluminum 8 String Lap Steel Short A6th.
Magnatone Jeweltone Series Lap Steel, Circa 1950? 6 String with F#minor7th Tuning.
1956 Dewey Kendrick D-8 4&3, Restoration Project.
1973 Sho~Bud Green SD-10 4&5 PSG, Restoration Project.
User avatar
Jeff Repp
Posts: 200
Joined: 2 Feb 2007 2:36 pm
Location: Rock Creek, OR, USA

Post by Jeff Repp »

If the Ponderosa isn't available could it return to the Beaverton Elks club?
User avatar
Lynn Stafford
Posts: 2233
Joined: 17 Sep 2002 12:01 am
Location: Ridgefield, WA USA
Contact:

Post by Lynn Stafford »

Jeff Repp wrote:If the Ponderosa isn't available could it return to the Beaverton Elks club?
Jeff, the Beaverton Elks sold that building and built another much smaller one elsewhere on the same property. Unfortunately, the new building probably wouldn't accommodate the jam.
Best regards,
Lynn Stafford

STEEL GUITAR WEST
http://www.steelguitarwest.com
Steel Guitar Technician (Restoration, Set-up, Service and Repair work)

Previous Emmons Authorized Dealer & Service Technician (original factory is now closed)

ZumSteel Authorized Service Technician
----------------------------------
User avatar
Ken Pippus
Posts: 2618
Joined: 8 Feb 2007 7:55 am
Location: Langford, BC, Canada

Post by Ken Pippus »

Bummer. Liked that place.
User avatar
Thomas Floyd
Posts: 54
Joined: 28 Mar 2017 8:35 am
Location: Gilchrist, Oregon, USA

Post by Thomas Floyd »

I'm just curious. Are there any Pedal Steel Guitar workshops in the Portland OR surrounding areas? I'm thinking of like a clinic.... with a couple of teachers. Maybe like a Friday evening and all day Saturday with a jam at the end.
Jesus Loves Me AND The Pedal Steel Guitar

MSA S-10
Gary Thorsen
Posts: 233
Joined: 14 May 2014 11:24 am
Location: Oregon, USA

workshop

Post by Gary Thorsen »

there's a regular Tuesday evening get-together over at Bob Muller's house in Wilsonville that's pretty close to a workshop. You might want to check that out.
User avatar
Thomas Floyd
Posts: 54
Joined: 28 Mar 2017 8:35 am
Location: Gilchrist, Oregon, USA

Post by Thomas Floyd »

Thanks Gary. We live inear central oregon, but we go to the valley once a month or so, and maybe I can stop in sometime. It would be nice to sit in and learn!
Jesus Loves Me AND The Pedal Steel Guitar

MSA S-10
User avatar
Larry Behm
Posts: 4400
Joined: 4 Aug 1998 11:00 pm
Location: Mt Angel, Or 97362

Post by Larry Behm »

Andy if we had a jam would you come and play? We miss seeing and hearing you old friend. Put on your coat, Oct is just around the corner.
'70 D10 Black fatback Emmons PP, Hilton VP, BJS bars, Boss GE-7 for Dobro effect, Zoom MS50G, Flamma Reverb, Planet Wave cables, Quilter 202 Toneblock, Telonics 15” speaker.

Phone: 971-219-8533
Post Reply