Seat Types and Height
Moderator: Shoshanah Marohn
-
- Posts: 55
- Joined: 21 Jan 2016 10:09 am
- Location: Salisbury, MD, USA
Seat Types and Height
I'm new to the forum and a beginner, so hope I do this correctly. How important is the "seat" to your playing. I've read that the height should be 19" to 21" and I note that professional pedal steel guitar seats provide "fixed" seating, meaning no swivels, casters, wheels, etc. How does the height relate to how your knees fit underneath the instrument and when/how do you know that you need to heighten the legs and rods on your instrument. I am trying to outfit my practice area and thought I would just purchase an old wood chair. Maybe I'm making this more difficult than it needs to be but thought I'd ask. This forum is great and I appreciate the advice, in advance. Thanks!
Proud to be an American!
- Mike Wheeler
- Posts: 3058
- Joined: 18 Oct 2004 12:01 am
- Location: Delaware, Ohio, USA
Welcome to the Forum, Dale. Don't worry about protocols here. Just ask questions when you need answers. We're all here to share info and experiences.
As to you steel seat....
When seated your legs should form a 90 degree angle under the guitar...(that is the correct height)
With good posture, you should be able to sit at you steel for at least an hour...(the seat needs adequate padding for you backside)
A pak-a-seat isn't needed unless you frequently need to carry your gear around to gigs, or jams, etc. Or if you're short on storage space for your steel accessories one would be handy.
As far as knee levers go, the steel should be adjusted to fit you, not the other way around.
Others may have more considerations. Hope this helped.
As to you steel seat....
When seated your legs should form a 90 degree angle under the guitar...(that is the correct height)
With good posture, you should be able to sit at you steel for at least an hour...(the seat needs adequate padding for you backside)
A pak-a-seat isn't needed unless you frequently need to carry your gear around to gigs, or jams, etc. Or if you're short on storage space for your steel accessories one would be handy.
As far as knee levers go, the steel should be adjusted to fit you, not the other way around.
Others may have more considerations. Hope this helped.
Best regards,
Mike
Mike
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
First off, I tried an office chair that had casters. When I would hit a knee lever, the seat wanted to turn in that direction, but not real bad. And if you are on a hard floor, it can slide back a little away from the guitar. Both not major problems, but I still don't recommend using one.
I'm not positive about the heights of seats.
As for the knee levers, I think height is very important. You don't want your knees hitting the bottom of the guitar, and I prefer them not touching the vertical levers. Since I play in cowboy boots, my right leg on the volume pedal would hit the bottom of the guitar. So I had to put a lift kit on the guitar and switch to a low profile volume pedal. I also found that the way my knee levers are adjusted, there is more distance between the towards the bottom, so I didn't have my leg right against the levers at the top of the lever. On my guitar, my knee would activate one of the levers slightly, throwing my guitar out of tune a little.
I'm not positive about the heights of seats.
As for the knee levers, I think height is very important. You don't want your knees hitting the bottom of the guitar, and I prefer them not touching the vertical levers. Since I play in cowboy boots, my right leg on the volume pedal would hit the bottom of the guitar. So I had to put a lift kit on the guitar and switch to a low profile volume pedal. I also found that the way my knee levers are adjusted, there is more distance between the towards the bottom, so I didn't have my leg right against the levers at the top of the lever. On my guitar, my knee would activate one of the levers slightly, throwing my guitar out of tune a little.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
Mike made a few other points. The legs should be at a 90 degree angle, but I've seen many players that their legs aren't, and they play great. It would seem to me, it would be more comfortable to have your thigh parallel to the bottom of the guitar (unless you tilt your guitar). But I also think the right legs of many players aren't at a 90 degree angle, depending where they place their volume pedal.I place mine back from the pedal bar, and my leg is pretty much close to a right angle. If I was to do like many others, and have my volume pedal placed right next to, or attached to the pedal bar, my leg wouldn't be at a right angle, and I find it really uncomfortable.
Seat padding... A big thumbs up from me on Michael's advice. Since I have had my mild strokes, I have balance issues. One band I play with has a solid line of monitors that I would have to step over. So I stay in my seat the whole 4 hours, but I do stand up a little during breaks. If I need to go to the restroom, one of the band members helps me step over, or pushes the monitors out of the way, so I don't fall. So, that padding is very important to me.
Seat padding... A big thumbs up from me on Michael's advice. Since I have had my mild strokes, I have balance issues. One band I play with has a solid line of monitors that I would have to step over. So I stay in my seat the whole 4 hours, but I do stand up a little during breaks. If I need to go to the restroom, one of the band members helps me step over, or pushes the monitors out of the way, so I don't fall. So, that padding is very important to me.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
Height: get close to the bottom of the guitar, but not quite touching it. Too low and the levers feel odd, too high and bellcranks tickle yer thighs.
Padding: quite dense, as you can't shift much.
The steel seats are popular because they meet those criteria for the vast majority of us. A thick phone book on the average chair will get the height, but fail for padding.
If you're not looking to gig yet (or don't mind schlepping a duffel bag), a drum throne meets the need well. Some steel players prefer them anyway
Padding: quite dense, as you can't shift much.
The steel seats are popular because they meet those criteria for the vast majority of us. A thick phone book on the average chair will get the height, but fail for padding.
If you're not looking to gig yet (or don't mind schlepping a duffel bag), a drum throne meets the need well. Some steel players prefer them anyway
2 pedal steels, a lapStrat, and an 8-string Dobro (and 3 ukes)
More amps than guitars, and not many effects
More amps than guitars, and not many effects
- Ben Edmonds
- Posts: 258
- Joined: 23 Jan 2007 10:08 pm
- Location: Greenfield, Massachusetts, USA
-
- Posts: 1181
- Joined: 14 Mar 2013 6:36 pm
- Location: Medford Oklahoma, USA
Dale, a search on forum archives will reveal a tremendous amount of info/discusions and many homemade seats that might help and even inspire you. I can't help but feel returning to your steel at a proper height and comfort level, familiarizes and promotes a better routine for practice and even learning? I'm aware that the pac a seat wasn't always around, but it's one accessory I don't want to be without.
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
Gee Lane. The bellcranks tickling my thighs is the closest I get to having a girlfriend.Height: get close to the bottom of the guitar, but not quite touching it. Too low and the levers feel odd, too high and bellcranks tickle yer thighs.
On the subject of keyboard seats, the student I had yesterday had one that I think was too low. When I played keyboards, I had one that could be adjusted close to the height of a steel seat. So, I believe there are different styles that are lower than the rest. Maybe take a tape measure with you, and check the height if you are going to buy one.
And, I used a good drum throne for years. Worked great. But Ben is right. Drum thrones are a bugger to carry around if you need to conserve space.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
- Mike Wheeler
- Posts: 3058
- Joined: 18 Oct 2004 12:01 am
- Location: Delaware, Ohio, USA
Richard, I use a piano x-frame bench seat (adjustable) and I did take a tape measure with me when I bought it...to make sure I got the height I wanted.
I don't play out anymore so the bench seat is fine. But I'd have a nice pack-a-seat by Mr. Naylor if I did any travel. I like his designs a lot!
I don't play out anymore so the bench seat is fine. But I'd have a nice pack-a-seat by Mr. Naylor if I did any travel. I like his designs a lot!
Best regards,
Mike
Mike
- Dustin Kleingartner
- Posts: 207
- Joined: 27 Oct 2015 9:39 am
- Location: Saint Paul MN, USA
- Contact:
- Allan Jirik
- Posts: 391
- Joined: 16 Feb 2010 3:45 pm
- Location: Wichita Falls TX
-
- Posts: 31
- Joined: 26 Sep 2014 9:27 am
- Location: Germany
That's one question I was about to ask. I live in Germany, with fairly limited access to steel accessories of all kinds, and shipping a seat over from the US will likely be prohibitively expensive.Lane Gray wrote:Height: get close to the bottom of the guitar, but not quite touching it. Too low and the levers feel odd, too high and bellcranks tickle yer thighs.
Padding: quite dense, as you can't shift much.
The steel seats are popular because they meet those criteria for the vast majority of us. A thick phone book on the average chair will get the height, but fail for padding.
If you're not looking to gig yet (or don't mind schlepping a duffel bag), a drum throne meets the need well. Some steel players prefer them anyway
I thought about trying a drum seat when I finally get my WBS - good to hear this is not such an absurd idea, but others actually do it as well.
I have mine set at 21" as I am average height. Padding is adequate, as my brain gets uncomfortable before my backside does.Ben Edmonds wrote:Portable folding keyboard seat can be bought for around thirty bucks and for me have the height and padding I need.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
- Scott Duckworth
- Posts: 3470
- Joined: 6 Apr 2013 8:41 am
- Location: Etowah, TN Western Foothills of the Smokies
- Contact:
Well, here's my seat..
It works out good, cause I'm usually fishing for a note or chord...
It works out good, cause I'm usually fishing for a note or chord...
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
- Ian Worley
- Posts: 2119
- Joined: 14 Jan 2012 12:02 pm
- Location: Sacramento, CA
- Ian Worley
- Posts: 2119
- Joined: 14 Jan 2012 12:02 pm
- Location: Sacramento, CA
-
- Posts: 55
- Joined: 21 Jan 2016 10:09 am
- Location: Salisbury, MD, USA
-
- Posts: 267
- Joined: 8 Oct 2007 1:16 pm
- Location: Pikeville, North Carolina
Walker Seat
Hello Dale, I am Walker Seats. Ergonomics is an important issue with any instrument. The seat you choose is not as important as the fit. I used a cut off bar stool for years and it worked fine. If you play a lot of different places, you will enjoy a "pack-a-seat." There are several brands and all are good. I'll be glad to talk to you about Walker Seats. Call me! Bryant Aycock @ 919-222-8015
-
- Posts: 166
- Joined: 14 Nov 2005 1:01 am
- Location: Gilmer, Texas, USA
Agree
Have the same set-up here. Works on guitar as well as my Hammond organ.Ben Edmonds wrote:Portable folding keyboard seat can be bought for around thirty bucks and for me have the height and padding I need. Folds up flat so I I find it easier and lighter to carry than a drum throne which I used to use.
- Joe Naylor
- Posts: 2711
- Joined: 19 Jan 2004 1:01 am
- Location: Avondale, Arizona, USA
steelseat.com
I build a lot of seats and my "standard height" is 20" and other seat manufacturers have been 21".
I use firm foam and others use soft foam.
From an ergonomics stand point your upper legs should be horizontal or slightly different.
Now saying all that I have seen all different heights. Heard that YOU MUST do this or that to reach pedals or knee levers.
Height is an indicator but all people with a certain height do not have the same length of legs.
my 2 cents worth.
Joe Naylor
www.steelseat.com
I use firm foam and others use soft foam.
From an ergonomics stand point your upper legs should be horizontal or slightly different.
Now saying all that I have seen all different heights. Heard that YOU MUST do this or that to reach pedals or knee levers.
Height is an indicator but all people with a certain height do not have the same length of legs.
my 2 cents worth.
Joe Naylor
www.steelseat.com
Joe Naylor, Avondale, AZ (Phoenix) Announcer/Emcee owner www.steelseat.com *** OFFERING SEATS AND Effects cases with or without legs and other stuff ****** -Desert Rose Guitar S-10, Life Member of the Arizona Carport Pickers Assoc., Southwest Steel Guitar Assoc., Texas Steel Guitar Assoc., GA Steel Guitar Assoc., KS Steel Guitar Assoc. (Asleep at the Steel) tag line willed to me by a close late friend RIP