New 10 string Pedal steel Wide String Spacing.

Instruments, mechanical issues, copedents, techniques, etc.

Moderator: Shoshanah Marohn

Jimmie Hudson
Posts: 1475
Joined: 18 Jan 2014 5:06 pm
Location: North Carolina, USA
Contact:

New 10 string Pedal steel Wide String Spacing.

Post by Jimmie Hudson »

I am looking to get feedback here on the forum on a new 10 string Pedal Steel Guitar with a 3/8 inch string spacing like some 6 and 8 string lap steels and some dobros have.
Would you share you opinion on whether you would like the wide 3/8 string spacing or would prefer the standard narrow spacing that is on most new 10 string pedal steels.
Thanks for your time and opinions.
I am thinking of coming out with a wide 3/8 string spacing Pedal steel is the reason for this poll.
Larry Phleger
Posts: 582
Joined: 18 Jan 1999 1:01 am
Location: DuBois, PA

Post by Larry Phleger »

I have always preferred the 3/8" spacing. I have never seen it used on a name brand steel, so I have learned to deal with the closer spacing that is standard on today's PSGs. If a pedal steel was built with a 3/8" spacing, the standard 10 string tone bars would be a little too short. I have built several non-pedal 10 steels using the 3/8" spacing and found the 12 string tone bar to be more appropriate for use with them.
Jimmie Hudson
Posts: 1475
Joined: 18 Jan 2014 5:06 pm
Location: North Carolina, USA
Contact:

tone bar

Post by Jimmie Hudson »

Larry Phleger wrote:I have always preferred the 3/8" spacing. I have never seen it used on a name brand steel, so I have learned to deal with the closer spacing that is standard on today's PSGs. If a pedal steel was built with a 3/8" spacing, the standard 10 string tone bars would be a little too short. I have built several non-pedal 10 steels using the 3/8" spacing and found the 12 string tone bar to be more appropriate for use with them.
The 12 string tone bar is very good for the 3/8 string spacing guitar. That is what I use with my guitar.
I also use a 12 string pickup to be sure to reach all the strings well.
User avatar
Dave Zirbel
Posts: 4170
Joined: 4 Aug 1998 11:00 pm
Location: Sebastopol, CA USA

Post by Dave Zirbel »

Those old Fender 10 stringers (models 800 and 2000) had 3/8" spacing. They feel great! :D
Last edited by Dave Zirbel on 21 Mar 2015 6:12 pm, edited 1 time in total.
Dave Zirbel-
Sierra S-10 (Built by Ross Shafer),ZB, Fender 400 guitars, various tube and SS amps
Roger Shackelton
Posts: 3911
Joined: 18 Mar 1999 1:01 am
Location: MINNESOTA (deceased)

Post by Roger Shackelton »

I believe Buddy Emmons stated once in an interview that he would have liked to play a D-10 string PSG with 3/8 string spacing.??

Roger
Richard Wilhelm
Posts: 204
Joined: 8 May 2013 7:05 am
Location: Ventura County, California

Post by Richard Wilhelm »

If I was planning on buying another steel, that is what I would get. I don`t understand why it`s not done. I find the 3/8" to be just right on my Fender, and I have narrow fingers.
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx

Fender 400, Fender FM212, G&L ASAT.

Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you.
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

My home-built S12 has 3/8" spacing by accident and I don't care for it, having got used to the 11/32" spacing on my old D10. When I was making the changer, sloppy thinking had me drill and tap the rear crossbar for the split tuners at 3/8" centres, thinking that they would be a near enough approximation to the 9mm spacing I got from using metric steel stock for the fingers. But it wasn't, so I made some thin washers to increase it.

Image

I want to make a new crossbar as soon as I have time.

11/32" = 8.73mm
3/8" = 9.53mm

so a little light sanding of the parts should achieve 11/32, although 9mm is probably a good compromise spacing anyway. (We live in a strange twilight zone over here where steel is metric but brass and aluminium are still in inches.)
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
Charles Kurck
Posts: 154
Joined: 15 Mar 2010 1:14 pm
Location: Living in Arkansas but Heaven is home

Post by Charles Kurck »

What many of us call spacing is actually the distance from center to center of the strings.
The distance between the strings is even less than the somewhat standard .34375” which is 11/32” at the changer.
Using common gauges of .036 and .038 on the E9th neck the distance between string 9 and 10 is only .30675 which is less than 5/16”.
With a tapered neck the area where we pick is even less than that.
It seems to me that it would be feasible to make a changer that shims could be added between the fingers to equalize the spacing between the strings.
User avatar
Jim Smith
Posts: 7946
Joined: 4 Aug 1998 11:00 pm
Location: Midlothian, TX, USA

Post by Jim Smith »

Charles Kurck wrote:What many of us call spacing is actually the distance from center to center of the strings.
The distance between the strings is even less than the somewhat standard .34375” which is 11/32” at the changer.
Using common gauges of .036 and .038 on the E9th neck the distance between string 9 and 10 is only .30675 which is less than 5/16”.
With a tapered neck the area where we pick is even less than that.
It seems to me that it would be feasible to make a changer that shims could be added between the fingers to equalize the spacing between the strings.
While your proposal "might" be possible, it certainly isn't practical. Center to center spacing has been standard forever. Who wants to re-shim their changer (and nut roller) every time you change string gauges and/or tuning?
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

Charles is correct in that what we call spacing should properly be called pitch - except in a musical context that would be confusing.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Jamie Frost
Posts: 15
Joined: 5 Feb 2012 8:52 am
Location: Spokane, WA

Post by Jamie Frost »

I'm with Dave Z, I really like it. The Sho-Bud built Fenders have this spacing as well.
User avatar
Charles Kurck
Posts: 154
Joined: 15 Mar 2010 1:14 pm
Location: Living in Arkansas but Heaven is home

Post by Charles Kurck »

Jim Smith:
I do not suggest shimming a guitar to match changing string gauges.
My changer idea would be to use shims so that all the fingers could be the same size
but the changer block would have progressively wider centers.
This would be a onetime factory setup using common string gauges as a reference.
For a changer with supports between each finger shims would not be needed
because the changer could have builtin wider centers for the bass strings.
Stephen Williams
Posts: 257
Joined: 4 Jun 2013 7:11 pm
Location: from Wales now in Berkeley,Ca, USA

Post by Stephen Williams »

My home built guitar has 3/8" spacing and I like it a lot. The normal steel spacing seems way too tight for me. What was the reason the spacing is so tight?
User avatar
Jim Smith
Posts: 7946
Joined: 4 Aug 1998 11:00 pm
Location: Midlothian, TX, USA

Post by Jim Smith »

Stephen Williams wrote:My home built guitar has 3/8" spacing and I like it a lot. The normal steel spacing seems way too tight for me. What was the reason the spacing is so tight?
I don't know for sure, but I always assumed that as more strings were added to the tuning, the spacing was reduced to help minimize the finger stretch between the top and bottom strings.
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

From the history I've read, mostly on this forum, the crucial change seems to have been from eight strings to ten.
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
User avatar
chris ivey
Posts: 12703
Joined: 8 Nov 1998 1:01 am
Location: california (deceased)

Post by chris ivey »

i don't think i could tell if strings were 1/32 inch closer or wider..i'm comfy with the emmons spacing.....which actually seems narrower than my old sho-bud professional.
User avatar
Lee Dassow
Posts: 840
Joined: 17 Mar 2010 8:01 am
Location: Jefferson, Georgia USA

Post by Lee Dassow »

I wonder what the spacing is on the new Mullen.
I never thought to ask. T.L.
2015 Mullen D-10 Royal Precision 9x8,-1990 BMI S-10 5x5-1972 Silver face Fender pro Reverb amp,-1965 Fender Super Reverb Amp,- 1966 Fender Showman Amp Two 15" JBL speakers,- 2006 65 Fender Twin Reverb reissue Amp,- 1982 Peavey Session 500 amp,-1978 Peavey Session 400,Goodrich Volume Pedals,John Pearse Steel Bars,
Richard Wilhelm
Posts: 204
Joined: 8 May 2013 7:05 am
Location: Ventura County, California

Post by Richard Wilhelm »

It`s amazing what 1/32" makes. You`ll adding 9/32", less than 1/3" total string width to a 10 string guitar. But to me, it`s the difference between awkwardly tight and just perfect.
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx

Fender 400, Fender FM212, G&L ASAT.

Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you.
Jimmie Hudson
Posts: 1475
Joined: 18 Jan 2014 5:06 pm
Location: North Carolina, USA
Contact:

ttt

Post by Jimmie Hudson »

tttt
User avatar
Don Chance
Posts: 28
Joined: 27 Feb 2015 9:01 am
Location: North Texas, USA
Contact:

Post by Don Chance »

Having PSG string spacing more like a dobro would really nice.
"Learn the rules like a pro, so you can break them like an artist." Pablo Picasso
User avatar
Ian Rae
Posts: 5826
Joined: 10 Oct 2013 11:49 am
Location: Redditch, England
Contact:

Post by Ian Rae »

Richard Wilhelm wrote:It's amazing what 1/32" makes.
I use four different trombone mouthpieces depending on which size of instrument I'm using. Their nominal inside diameters are 26.00mm, 25.73mm, 25.40mm, and 25.00mm.

The smallest increment is between the first two - works out at 0.011", a measurement we're all familiar with! The largest is still only 0.016". If I pick up the wrong one I know it as soon as I put it on my face - no need to blow. Why should not our fingers be just as sensitive?

[for reference, 1/32" = 0.031"]
Make sleeping dogs tell the truth!
Homebuilt keyless U12 7x5, Excel keyless U12 8x8, Williams keyless U12 7x8, Telonics rack and 15" cabs
Richard Wilhelm
Posts: 204
Joined: 8 May 2013 7:05 am
Location: Ventura County, California

Post by Richard Wilhelm »

This post is for Jimmy Hudson. If you do go ahead and build a new pedal steel, you might also think of terms of improving the scale length. I play a Fender long scale 400 in which you can easily change the bridge position. I also play in Eb9, this is because I feel I get better tone and it keeps from breaking the high G# string on the 24 1/2" scale with the solid bridge (a little bicycle chain grease also helps). Another player on the Fender Steel Forum recently decresed his scale length to 24 3/16", also to reduce string breakage. I
followed suite and did the same thing, but I came to 24 7/32". I did this not to keep from breaking strings which I had solved, but to give the strings more resonence and better pick attack. Now I tried 24 3/16" (6/32") but the tone went from perfectly round and focused to muddy and unfocused. That 1/32" absolutely made a world of difference. There's that same number again. Keep in mind that the early Fender guitars have pickups of around 10 ohm impedance compared to the modern steel pickup of around.of around 17 ohm. I don't know if that makes a difference but this is all food for thought. Good luck.
"Be Kind to Animals, don't eat Them"
"If you know music, you°ll know most everything you°ll need to know" Edgar Cayce
"You're only young forever" Harpo Marx

Fender 400, Fender FM212, G&L ASAT.

Was part of a hippie-Christian store in Cotati, California (circa 1976) called THE EYE OF THE RAINBOW. May God love you.
Jimmie Hudson
Posts: 1475
Joined: 18 Jan 2014 5:06 pm
Location: North Carolina, USA
Contact:

tuning

Post by Jimmie Hudson »

Richard Wilhelm wrote:This post is for Jimmy Hudson. If you do go ahead and build a new pedal steel, you might also think of terms of improving the scale length. I play a Fender long scale 400 in which you can easily change the bridge position. I also play in Eb9, this is because I feel I get better tone and it keeps from breaking the high G# string on the 24 1/2" scale with the solid bridge (a little bicycle chain grease also helps). Another player on the Fender Steel Forum recently decresed his scale length to 24 3/16", also to reduce string breakage. I
followed suite and did the same thing, but I came to 24 7/32". I did this not to keep from breaking strings which I had solved, but to give the strings more resonence and better pick attack. Now I tried 24 3/16" (6/32") but the tone went from perfectly round and focused to muddy and unfocused. That 1/32" absolutely made a world of difference. There's that same number again. Keep in mind that the early Fender guitars have pickups of around 10 ohm impedance compared to the modern steel pickup of around.of around 17 ohm. I don't know if that makes a difference but this is all food for thought. Good luck.
I use a 24 inch scale and the pickups are in the 19 ohm range I have one of the guitars built. As soon as I get the photos I will post them. I like the 3/8 or .375 wide string spacing way better than the standard 10 string .312 to .340 spacing.
Jimmie Hudson
Posts: 1475
Joined: 18 Jan 2014 5:06 pm
Location: North Carolina, USA
Contact:

Photos of the Hudson 3/8 Wide string spacing guitar

Post by Jimmie Hudson »

The New Hudson 10 String 3/8 wide string spacing Pedal Steel guitar. Order your today.
Standard 3 floors and 4 knees, Pull Release Changer,
Real Maple Hardwood body neck and keyhead natural clear coat finish, Colors and stains Optional.
Standard E9th setup. Geoege L Eon Pickup is standard.
Base price starts at $995.00
Call for more information.
704-986-6481 8AM-9PM EST.
Image
Roger Shackelton
Posts: 3911
Joined: 18 Mar 1999 1:01 am
Location: MINNESOTA (deceased)

Post by Roger Shackelton »

Does anyone have a sketch of a pull release changer?

I find it difficult to imagine how this design works. :)


Roger
Post Reply