Illuminated fretboard for Steelies
- Richard Topping
- Posts: 9
- Joined: 29 Dec 2014 9:38 am
- Location: United Kingdom
Illuminated fretboard for Steelies
Hi folks,
If you sometimes have a problem seeing your fretboard onstage or at home, then you might be interested in my illuminated fretboards.
You can see them on my website and obtain a quotation.
Although they are custom-made to your requirements, you'll probably be pleasantly surprised at the price.
The website is www.live-edge-fretboards.co.uk
Best regards,
Richard.
If you sometimes have a problem seeing your fretboard onstage or at home, then you might be interested in my illuminated fretboards.
You can see them on my website and obtain a quotation.
Although they are custom-made to your requirements, you'll probably be pleasantly surprised at the price.
The website is www.live-edge-fretboards.co.uk
Best regards,
Richard.
- Malcolm McMaster
- Posts: 1416
- Joined: 30 May 1999 12:01 am
- Location: Beith Ayrshire Scotland
Have tried this out on my guitar, great quality product at a great price, and Richard is a great guy to deal with.
MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case.
- Rene Brosseau
- Posts: 495
- Joined: 21 Mar 2006 1:01 am
- Location: Chatham,Ontario, Canada
fretboard
Great idea ! Have you shipped to Canada yet?
Franklin #130, Melobar Skreemer, Wechter Scheerhorn Resonator, Nashville 112, Boss DD 3 &/or Profex II
-
- Posts: 1161
- Joined: 16 Dec 2003 1:01 am
- Location: Covington, Georgia, USA
- Richard Topping
- Posts: 9
- Joined: 29 Dec 2014 9:38 am
- Location: United Kingdom
Re: fretboard
Hi Rene,Rene Brosseau wrote:Great idea ! Have you shipped to Canada yet?
Thanks - glad you like it.
I only started production in December, so haven't sent any to Canada yet.
The fretboards are all made-to-order, but the typical price is 110 UK pounds excluding shipping, with good discount if you buy more than one.
The illuminated fretboard sits on top of you guitar's fretboard and does not need any modifications to your guitar.
The scale-length and the widths/taper are made specifically to your requirements, and you can decide whether you want the cable to be at the front or at the rear of the fretboard.
It is available in 5 colours.
Anyhoo...If you go onto my website's How to Order page you'll be able to key in some sizes from your guitar and obtain a quote.
Best regards,
Richard.
- Richard Topping
- Posts: 9
- Joined: 29 Dec 2014 9:38 am
- Location: United Kingdom
-
- Posts: 167
- Joined: 22 May 2013 10:54 am
- Location: Castle Rock, CO
- Richard Topping
- Posts: 9
- Joined: 29 Dec 2014 9:38 am
- Location: United Kingdom
- Richard Sinkler
- Posts: 17067
- Joined: 15 Aug 1998 12:01 am
- Location: aka: Rusty Strings -- Missoula, Montana
Copied from a currency converter:The fretboards are all made-to-order, but the typical price is 110 UK pounds excluding shipping, with good discount if you buy more than one.
110 British Pound Sterling equals
166.88 US Dollar
Is this right?
They do look really cool. I have had nights where I couldn't see.
Carter D10 8p/8k, Dekley S10 3p/4k C6 setup,Regal RD40 Dobro, NV400, NV112 . Playing for 53 years and still counting.
- Richard Topping
- Posts: 9
- Joined: 29 Dec 2014 9:38 am
- Location: United Kingdom
- John McClung
- Posts: 5106
- Joined: 4 Aug 1998 11:00 pm
- Location: Olympia WA, USA
- Contact:
These look great.
Just historically curious: didn't MSA announce a product like this a year or two ago? Was it never released?
Just historically curious: didn't MSA announce a product like this a year or two ago? Was it never released?
E9 INSTRUCTION
If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
If you want to have an ongoing discussion, please email me, don't use the Forum messaging which I detest! steelguitarlessons@earthlink.net
MSA Lfrets
'83 MSA Classic SS D-10 8+8, Peavey Session 400 & NV 112, BJS Bars, Pod XT, Steel Seat by Joe Naylor, Goodrich L120.
- Malcolm McMaster
- Posts: 1416
- Joined: 30 May 1999 12:01 am
- Location: Beith Ayrshire Scotland
John, believe the built into neck ones are available on new guitars from factory, but don't believe the retro fit ones are available yet, think this may be due to Kyle being off work for a considerable time after falling and injuring his shoulder, perhaps Kyle can update.
MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case.
-
- Posts: 2191
- Joined: 13 Nov 2006 1:01 am
- Location: Texas, USA
Hey....will you be at the Dallas Ft Worth show or have some of these there to purchase? I believe they will sell very fast if you do. Can we order by make of guitar? I play a Carter SD-10 and I believe they are all the same specs no matter what year it is. And when will you have just a plain white led available soon?
Thanks
Thanks
- Richard Topping
- Posts: 9
- Joined: 29 Dec 2014 9:38 am
- Location: United Kingdom
Hi David,
Thanks for your interest.
The plain white/clear version is almost ready and should be available end Feb.
You asked a good question regarding a standardised fretboard, but I'd have to drastically reduce the range of options in order to do this.
Just now I offer 5 different colours (excluding white) plus the choice of having the cable at the front or the rear of the guitar, making 10 possible configurations.
I suppose if the colours were limited to one or two instead of five then I could offer an "off the shelf" fretboard to suit a range of guitar makes.
Delivery is currently only 2 weeks, so there's no real reason to reduce the range at present, but it's definitely something I'll keep in mind.
I had hoped to attend the Dallas show, but sadly I won't manage this year.
Best regards,
Richard.
Thanks for your interest.
The plain white/clear version is almost ready and should be available end Feb.
You asked a good question regarding a standardised fretboard, but I'd have to drastically reduce the range of options in order to do this.
Just now I offer 5 different colours (excluding white) plus the choice of having the cable at the front or the rear of the guitar, making 10 possible configurations.
I suppose if the colours were limited to one or two instead of five then I could offer an "off the shelf" fretboard to suit a range of guitar makes.
Delivery is currently only 2 weeks, so there's no real reason to reduce the range at present, but it's definitely something I'll keep in mind.
I had hoped to attend the Dallas show, but sadly I won't manage this year.
Best regards,
Richard.
-
- Posts: 2806
- Joined: 7 Oct 2000 12:01 am
-
- Posts: 1564
- Joined: 15 Apr 2003 12:01 am
- Location: Texas
- Malcolm McMaster
- Posts: 1416
- Joined: 30 May 1999 12:01 am
- Location: Beith Ayrshire Scotland
Brian, the MSA retro fit one is around $340, it is a different style of construction.
MSA Millenium SD10, GK MB200, Sica 12inch cab, Joyo American Sound Pedal/ Jay Ganz Straight Ahead amp, Telonics 15inch in Peavey cab, Digitech RP150, Peterson tuner.Hilton volume pedal.Scott Dixon seat and guitar flight case.
-
- Posts: 13
- Joined: 10 Feb 2004 1:01 am
- Location: Green Bay, Wisconsin, USA
Illuminated fretboards
I just received and tried out the illuminated fretboard from Richard Topping. Awesome product and a great person to do business with.
-
- Posts: 5857
- Joined: 4 Aug 1998 11:00 pm
- Location: Oceanside, Calif, USA
- Contact:
-
- Posts: 2191
- Joined: 13 Nov 2006 1:01 am
- Location: Texas, USA