MSA Knee lever kit

Brad Rigby · Post by **Brad Rigby** » 15 Dec 2014 3:32 pm

I need a Vertical lever kit for a MSA S-10
Email / zumplayer@hotmail.com

Thanks
Brad

Lane Gray · Post by **Lane Gray** » 15 Dec 2014 5:02 pm

Go to www.psgparts.com
Or www.steelguitars.me

Billy Knowles · Post by **Billy Knowles** » 15 Dec 2014 8:21 pm

Steel Guitars of the North Country has them

Brad Rigby · Post by **Brad Rigby** » 16 Dec 2014 8:27 am

Thanks for the info.

Brad Rigby · Post by **Brad Rigby** » 16 Dec 2014 9:23 am

Does anyone know whether psgparts.com is in business.
Both phone numbers are inoperable and no reply to email attempts.

Thanks
Brad

Brad Rigby · Post by **Brad Rigby** » 16 Dec 2014 10:37 am

Finally reached Michael

Thanks

Lane Gray · Post by **Lane Gray** » 16 Dec 2014 2:04 pm

Everything in the kit is self explanatory, except for the wood screw. To make sure that the lever pull doesn't rotate on the shaft, the lever doesn't use a stop at the end of the shaft. The wood screw goes into the deck, under the lever pull.

Michael Yahl · Post by **Michael Yahl** » 17 Dec 2014 6:02 am

Lane, wood screw?

Got a pic whenever you land back at home?

Lane Gray · Post by **Lane Gray** » 17 Dec 2014 6:55 am

Your kit came with one, Michael. I took this awhile ago, and I disconnected the lever from the pull so you can see it.

EDIT: Perhaps your kit didn't come with it, and Reece told me that they used a screw. Since the screw stops the lever and not the shaft, you CAN'T overpower it and twist the pull or the stop.

Michael Yahl · Post by **Michael Yahl** » 17 Dec 2014 9:17 am

No, I've never supplied those screws but I'll throw them in the kits.

It's a good simple idea that I wasn't aware of before.

Thanks for the info.

Michael

The Steel Guitar Forum