Newest McGregor Build Completed! LA LUNA

Lap steels, resonators, multi-neck consoles and acoustic steel guitars

Moderator: Brad Bechtel

Post Reply
Don McGregor
Posts: 635
Joined: 13 Dec 2008 9:07 am
Location: Memphis, Tennessee

Newest McGregor Build Completed! LA LUNA

Post by Don McGregor »

Announcing the long awaited completion of LA LUNA, steel of my dreams. Finally.
She has Lacewood necks and rails, and an African Mahogany, stair stepped deck.
These amazing, clear, acrylic, Lunar Phase fret boards, that allow the full grain of the Lacewood to show through were designed, laser etched, and polished by my good friend Mark Bracewell, Chief Luthier and Magician at Willow Glen Guitars. Mark is also a very fine fellow. The finish is a light Amber Aniline dye sealed with a couple of coats of shellac, several coats of pore filler, and many coats of nitrocellulose lacquer applied with rattle cans, and level sanded between every four coats.
Not finding a source for new end plates or aluminum key heads, I have re-purposed these, which I purchased used, cutting down two sets of 10 string key heads into 8 stringers.
I routed the pickup cavities to fit either George L’s, which, so far, I am liking a lot, or narrow mount Jerry Wallace Truetones, which I already know I like, and which I also have on hand. I will be changing the pickups back and forth until I settle on one. I feel certain other pickups would fit, also.
Thank you to everyone on this forum for providing me and the rest of the entire steel guitar community with advice, information, and caring. Of course, I owe the biggest thanks of all to my wife and children for putting up with me spending so many hours out puttering around in the shop while the world goes on whirling around outside.

Image
Image
Image
Image
Image
Image
Image
User avatar
Jon Light
Posts: 13745
Joined: 4 Aug 1998 11:00 pm
Location: Saugerties, NY
Contact:

Post by Jon Light »

Congratulations! What a beautiful guitar. You deserve to feel proud.
Ken Campbell
Posts: 846
Joined: 25 Aug 2013 7:55 am
Location: Ferndale, Montana

Post by Ken Campbell »

Goodness yes. Spectacular!
User avatar
Tom Pettingill
Posts: 2246
Joined: 23 Apr 2007 11:10 am
Location: California, USA (deceased)

Post by Tom Pettingill »

Great job Don!
Paul Honeycutt
Posts: 860
Joined: 28 Mar 2005 1:01 am
Location: Colorado, USA

Post by Paul Honeycutt »

Amazing! That's such a beautiful guitar. Post some sound clips when you can.
Bill Hatcher
Posts: 7252
Joined: 6 Nov 1998 1:01 am
Location: Atlanta Ga. USA

Post by Bill Hatcher »

nice!!!! congrats!!!
User avatar
Mike Neer
Posts: 10990
Joined: 9 Dec 2002 1:01 am
Location: NJ
Contact:

Post by Mike Neer »

I admire your building skills, Don. Best of luck with that beauty!
User avatar
Peter Jacobs
Posts: 982
Joined: 4 Aug 1998 11:00 pm
Location: Northern Virginia

Post by Peter Jacobs »

Wow, Don-- that's just beautiful. Very clean and sleek. Great choice on the fret markers, too.
norm mcdaniel
Posts: 291
Joined: 5 Nov 2000 1:01 am
Location: waco tx

Post by norm mcdaniel »

:eek: :eek: Don---I wish Oh how I wish I had one as well. Verry nice guitar and all parts too

Best of Luck
Norm in Waco Tx :) :)
Don McGregor
Posts: 635
Joined: 13 Dec 2008 9:07 am
Location: Memphis, Tennessee

Post by Don McGregor »

Building an instrument is a learning experience, and this one taught me a lot. I now know where I want to go with my next couple of builds.
Thank you all again for all your positive support.
I will try to get a recording up soon.
User avatar
George Piburn
Posts: 2045
Joined: 1 Jul 2003 12:01 am
Location: The Land of Enchantment New Mexico
Contact:

Beautiful

Post by George Piburn »

Congratulations Don - looks great !!

We have learned to take the Brass to a plate shop for Buffing and Nickel plating.
It eliminates the eventual Tarnish that Brass gets, only need to wipe to shine up during string changes.

The Nickel plate preserves the quality tone of the Brass - Chrome is too hard and alters the tone to a more Sharp Quality.

I am a big lover of LaceWood -- you have a collectible in your estate now. :D

Looking Forward to more of your awesome builds.

GeorgeBoards
Don McGregor
Posts: 635
Joined: 13 Dec 2008 9:07 am
Location: Memphis, Tennessee

Post by Don McGregor »

Thank you, George. I do like the look of tarnished brass, myself, but also love Nickel. I am planning on having some plating done in the future. I may even pull these parts off at some point, and get them plated. I have a few Nickel plated bridges set aside for the next few builds. This only my second build, so I am trying different things. One thing I discovered is that Lacewood is a VERY porous wood, and takes a LOT of grain filling. My hat is off to anyone who gets a perfect, mirror, Lacquer finish on it. It took me a while to get a handle on it.
User avatar
Ron Mielzynski
Posts: 108
Joined: 30 Aug 2011 9:14 pm
Location: Illinois, USA
Contact:

Post by Ron Mielzynski »

Beautiful piece. Lots of nice details in those close up pics.
RAM Guitars
www.RAMguitars.com
User avatar
Tom Pettingill
Posts: 2246
Joined: 23 Apr 2007 11:10 am
Location: California, USA (deceased)

Post by Tom Pettingill »

Don McGregor wrote:... One thing I discovered is that Lacewood is a VERY porous wood, and takes a LOT of grain filling....
Grain filling is a pain, but there are some decent products that can ease the pain. For Lacewood you might like Zpoxy Finishing Resin. It has a nice and thin viscosity, very good open time, and sands very well unlike some other options. LMI is one source, but its easily found in many model / hobby type shops. Keep in mind that Zpoxy is a brand name and it is their Finishing Resin that you want http://www.lmii.com/products/finishing/ ... hing-resin

I apply it with a squeegee like in this video https://www.youtube.com/watch?v=YYHxMg7n9cI
User avatar
George Piburn
Posts: 2045
Joined: 1 Jul 2003 12:01 am
Location: The Land of Enchantment New Mexico
Contact:

YES ZPoxy

Post by George Piburn »

We use the ZPoxy , and get it from Amazon typically from a hobby shop. I get the 15 minute Finishing.

It has a light amber to it , and will darken your project a tiny bit , but it is desirable.

Another Tip is to Thin it some with Denatured Alcohol which help to drive it down into the grain.

You may need to do the treatment 2-3 times but not to worry, the clear lacquer will instantly make any funky looking stuff go clear.

We use a Blade from a Utility knife and old tee shirt doused with the Denatured to wipe after each scrape. You do the scrape while the ZPoxy is gelling up, to make it go easier, and reduce sanding after the treatments.

Make certain you allow it to dry 24 hours before each re-treatment, and to dry scrape it as well.

All of this will make the lacquer later go so much easier and way less coats to get to the mirror status.

Thank you Tom for bringing this up! :D

Image
Don McGregor
Posts: 635
Joined: 13 Dec 2008 9:07 am
Location: Memphis, Tennessee

Post by Don McGregor »

WOW, Tom and George. I googled until my fingers were numb looking for something like this. I will definitely use it next time. I did find, and wind up using a product called "CrystaLac", which worked pretty well, though at times it seemed a little too thick for some of the pores. It took several applications, and still many coats of lacquer to finally get something I could really buff out.
I look at the Pettingill and Georgeboards posts all the time, and then go out in the shop, and try to figure out how I can do that. I am continually in awe of the beautiful instruments you guys turn out. It means a lot to receive encouragement from builders like you.
User avatar
George Piburn
Posts: 2045
Joined: 1 Jul 2003 12:01 am
Location: The Land of Enchantment New Mexico
Contact:

Amazon Glue Shop

Post by George Piburn »

I just ordered some for my year end super secret builds.

http://www.amazon.com/Pacer-Z-Poxy-Fini ... G5OQ2VRUGK

Hope this helps you and others too. :D
Don McGregor
Posts: 635
Joined: 13 Dec 2008 9:07 am
Location: Memphis, Tennessee

Post by Don McGregor »

I just ordered mine, too. Thank you both for the great tip.
User avatar
Tom Pettingill
Posts: 2246
Joined: 23 Apr 2007 11:10 am
Location: California, USA (deceased)

Post by Tom Pettingill »

Always glad to help if I can :D

A quick tip. Zpoxy flows, spreads, and levels very well, but as we get into winter months, colder weather will make it thicker. After I get it all squeegeed off, I'll hit it with a hair dryer and warm things up. It helps to let the resin sink into the pores and lets air bubbles to come to the top.

In all, I think that you will like the Zpoxy, but no matter how you cut it, grain filling has been the bane of fine finishers for generations.
On finishing in general, there is no quick and easy, just different levels of not so bad. Most don't realize, but you can get some serious time invested in an instruments finish. The most important part of the whole process is patience. In the end, you will forget all about the pain when its done.

.
Image
Don McGregor
Posts: 635
Joined: 13 Dec 2008 9:07 am
Location: Memphis, Tennessee

Post by Don McGregor »

My shop is not insulated yet, so Winter is a hard time to find conditions conducive to fine finishes. Too, I'm in the soggy Delta, so I have to wait for the humidity to drop down and play nice. Sounds like I will be using a hair dryer soon. That picture is what I'm shooting for.
Post Reply