Zane King Rock & Blues Steel Guitar
Moderator: Shoshanah Marohn
Zane King Rock & Blues Steel Guitar
As most of you know by now, I am a risk taker when it comes to anything related to my steel guitar. Maybe it is more than risk and I'm just a complete rebel but don't get me wrong I LOVE the traditional side of this instrument. That said, I'm still intrigued by the capability of the pedal steel when it comes to Rock & Blues music. I don't believe we have even seen the half of what can be done by taking the instrument in that direction. That said, I am still very much pursuing this possibility within my own musical journey.
The following link is my latest attempt with my Jackson 12 string and a Roland Cube 80. Again, this is intended to be just a jam session of experimentation. I'm not trying to create a hit song here. I'm attempting to develop my style and technique in this musical arena. Also, give the whole thing a listen. It took me about a minute into this video to really catch the groove.
Zane King "The BLUES THANG" You Tube Video link:
http://www.youtube.com/watch?v=H9YCmsgE ... e=youtu.be
The following link is my latest attempt with my Jackson 12 string and a Roland Cube 80. Again, this is intended to be just a jam session of experimentation. I'm not trying to create a hit song here. I'm attempting to develop my style and technique in this musical arena. Also, give the whole thing a listen. It took me about a minute into this video to really catch the groove.
Zane King "The BLUES THANG" You Tube Video link:
http://www.youtube.com/watch?v=H9YCmsgE ... e=youtu.be
Zane King
Email: zaneking@me.com
Email: zaneking@me.com
- Sonny Jenkins
- Posts: 4376
- Joined: 19 Sep 2000 12:01 am
- Location: Texas Masonic Retirement Center,,,Arlington Tx
-
- Posts: 1034
- Joined: 3 Apr 2006 12:01 am
- Location: Hardin, Kentucky, USA
- Mark van Allen
- Posts: 6378
- Joined: 26 Sep 1999 12:01 am
- Location: Watkinsville, Ga. USA
- Contact:
- Steve Lipsey
- Posts: 1900
- Joined: 9 May 2011 8:51 pm
- Location: Portland, Oregon, USA
- Contact:
Wow! Eddie van Halen better move over and get out of your way!
www.facebook.com/swingaliband & a few more....
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham "CooderNator" archtop parlor electric reso w/Fishman & Lollar string-through
Ben Bonham "ResoBorn" deep parlor acoustic reso with Weissenborn neck and Fishman
Ben Bonham Style 3 Tricone., 1954 Oahu Diana, 1936 Oahu Parlor Squareneck
Williams S10s, Milkman Pedal Steel Mini & "The Amp"
Ben Bonham "CooderNator" archtop parlor electric reso w/Fishman & Lollar string-through
Ben Bonham "ResoBorn" deep parlor acoustic reso with Weissenborn neck and Fishman
Ben Bonham Style 3 Tricone., 1954 Oahu Diana, 1936 Oahu Parlor Squareneck
- Michael Strauss
- Posts: 407
- Joined: 8 Jan 2007 10:07 am
- Location: Delray Beach,Florida
Wow! Now that's what I'm talking about. A great clip to play to people who don't understand the infinite possibilities a pedal steel it's capable of. Thank you, great job.
Carter S-12U, Sho-Bud LGD (80's), Fender Jazz King, Korg Pandora Toneworks PX4D, Modulus Q6, Ampeg B5R, Lapstick Travel Guitar mod to lapsteel
- Jerry Hayes
- Posts: 7489
- Joined: 3 Mar 1999 1:01 am
- Location: Virginia Beach, Va.
- Scott Duckworth
- Posts: 3470
- Joined: 6 Apr 2013 8:41 am
- Location: Etowah, TN Western Foothills of the Smokies
- Contact:
And they just thought steel was for country, swing, or Hawaiian...
Amateur Radio Operator NA4IT (Extra)
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
http://www.qsl.net/na4it
I may, in fact, be nuts. However, I am screwed onto the right bolt... Jesus!
Thanks for listening and contributing!
Mark Van Allen - You are likely right about the 1/10th. As I have stated many times here, our instrument is still in its infancy. The expression that it affords us players seems to be significantly more than other instruments. In many ways, I'm a more studied and accomplished pianist. However, I can't even begin to express my musical soul on those 88 hammers like I can with my musical bicycle!
Thanks fellows for all the names mentioned in your response. I am acquainted with Robert Randolph. I hope to record and jam with him someday. That would be adventure.
Mark Van Allen - You are likely right about the 1/10th. As I have stated many times here, our instrument is still in its infancy. The expression that it affords us players seems to be significantly more than other instruments. In many ways, I'm a more studied and accomplished pianist. However, I can't even begin to express my musical soul on those 88 hammers like I can with my musical bicycle!
Thanks fellows for all the names mentioned in your response. I am acquainted with Robert Randolph. I hope to record and jam with him someday. That would be adventure.
Zane King
Email: zaneking@me.com
Email: zaneking@me.com
- Jan Viljoen
- Posts: 480
- Joined: 30 Mar 2011 7:00 am
- Location: Pretoria, South Africa
Zane's Blues
Just Brilliant Zane.
I see you are using the bar almost like a pencil to point to the strings.
What was your settings on the Cube?
Have you spoken to Randolph's team yet?
I see you are using the bar almost like a pencil to point to the strings.
What was your settings on the Cube?
Have you spoken to Randolph's team yet?
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
Jan, I use the classic amp setting most of the time. It's all just a matter of how you dial in the gain and the volume on the distorted channel. It's a balancing act for sure!
As for RR, I haven't spoke to his camp recently. We have met and he certainly seems to appreciate my approach to the steel guitar. We have talked about several thoughts and ideas. I'm more acquainted with Lonnie Bennett. My hope is that Lonnie or someone might let RR see this video so that he can see some of my latest efforts in that style. Personally, I think it would be fantastic for RR and I to jam together. Players tend to feed from one another on that kind of thing. I believe without a doubt Robert would bring me up a level or two. Only then to likely rip something off that would leave me speechless! He is a real performer!
As for RR, I haven't spoke to his camp recently. We have met and he certainly seems to appreciate my approach to the steel guitar. We have talked about several thoughts and ideas. I'm more acquainted with Lonnie Bennett. My hope is that Lonnie or someone might let RR see this video so that he can see some of my latest efforts in that style. Personally, I think it would be fantastic for RR and I to jam together. Players tend to feed from one another on that kind of thing. I believe without a doubt Robert would bring me up a level or two. Only then to likely rip something off that would leave me speechless! He is a real performer!
Zane King
Email: zaneking@me.com
Email: zaneking@me.com
- Jan Viljoen
- Posts: 480
- Joined: 30 Mar 2011 7:00 am
- Location: Pretoria, South Africa
I wish there was more interest in this style of steel guitar playing. Does anyone know of a forum/website kind of thing where slide playing and steel guitar played in more of rock/blues style is promoted? While this Forum here is obviously wonderful it is also very obvious that this place exists for the more traditional roots of our instrument. I know there are exceptions here, of course. That said, I just wish I could find a site where more extreme playing on steel guitars and slides is being promoted. Any thoughts or ideas?
Zane King
Email: zaneking@me.com
Email: zaneking@me.com
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
- Jan Viljoen
- Posts: 480
- Joined: 30 Mar 2011 7:00 am
- Location: Pretoria, South Africa
Zane's rock and blues.
Zane,
I seems to me that there is a shortage of the kind of websites that play pedal-steel-rock.
I am sure you are fully acquainted with Robert's music, but I found this web with two video clips.
http://www.democraticunderground.com/1034959
Here is a web that discusses some pedal steel music. Just basic stuff.
http://www.thegearpage.net/board/archiv ... 15706.html
And then something about Hal Merrill.
http://www.halmerrill.com/bio/
And girl singers from Germany.
https://www.youtube.com/watch?v=wTvBD8x3_-A
Let's hope this genre will expand.
I seems to me that there is a shortage of the kind of websites that play pedal-steel-rock.
I am sure you are fully acquainted with Robert's music, but I found this web with two video clips.
http://www.democraticunderground.com/1034959
Here is a web that discusses some pedal steel music. Just basic stuff.
http://www.thegearpage.net/board/archiv ... 15706.html
And then something about Hal Merrill.
http://www.halmerrill.com/bio/
And girl singers from Germany.
https://www.youtube.com/watch?v=wTvBD8x3_-A
Let's hope this genre will expand.
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
Chris, that is perfect!!!! I do get a lot of milage with my name. I think that would just be over the top cool! I also like your suggestion but goodness gracious I don't need one more thing to be in charge of these days! That said, I have had some discussions with a lot of folks about this subject. For me, there has to be a better way to get exposure via You Tube/Vevo. Still, a website that was ran like a social forum has to have some value, but I'm sure no authority on that topic.
Jan, thanks for links! All cool stuff. Robert certainly is an ambassador for the future and expansion of steel guitar enthusiast. It's good to have him here as a member of this Forum. He loves steel guitar and greatly respects the history of the instrument. There are others out there too. Many others! That said, I still don't see much infrastructure being built in order to promote this side of our beloved instrument. If anything, I think there is likely more being done to hurt that development than anything. That's not to say it is intentional. It is just the mere fact that for decades the pedal steel (lap steels not included in this conversation) has been looked at as almost exclusively as a Country Music instrument. That's okay of course. I say put a pedal steel in every band! Require it! That all said, I just know there is more. Much more! My goal with this video link above and all of this conversation is to simply keep the firing burning and to start fires where possible.
I think the more I type this message the more convinced I become bOb that we need a spot on this Forum for this type of thing. Likely it already exists and I'm just stuck in a rut coming to the Steel Players topics every time I open up this website. Please advise me.
Jan, thanks for links! All cool stuff. Robert certainly is an ambassador for the future and expansion of steel guitar enthusiast. It's good to have him here as a member of this Forum. He loves steel guitar and greatly respects the history of the instrument. There are others out there too. Many others! That said, I still don't see much infrastructure being built in order to promote this side of our beloved instrument. If anything, I think there is likely more being done to hurt that development than anything. That's not to say it is intentional. It is just the mere fact that for decades the pedal steel (lap steels not included in this conversation) has been looked at as almost exclusively as a Country Music instrument. That's okay of course. I say put a pedal steel in every band! Require it! That all said, I just know there is more. Much more! My goal with this video link above and all of this conversation is to simply keep the firing burning and to start fires where possible.
I think the more I type this message the more convinced I become bOb that we need a spot on this Forum for this type of thing. Likely it already exists and I'm just stuck in a rut coming to the Steel Players topics every time I open up this website. Please advise me.
Zane King
Email: zaneking@me.com
Email: zaneking@me.com
- Jan Viljoen
- Posts: 480
- Joined: 30 Mar 2011 7:00 am
- Location: Pretoria, South Africa
Zane,
When I got up this morning, I wondered what the reaction on this thread would be.
But you nailed it!!
Every band of any kind should have a (pedal) steel in it.
Surely, now the games have begun.
When I got up this morning, I wondered what the reaction on this thread would be.
But you nailed it!!
Every band of any kind should have a (pedal) steel in it.
Surely, now the games have begun.
Sierra S10, Stage One, Gibson BR4, Framus, Guya 6&8, Hofner lap, Custom mandolins, Keilwerth sax.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
Roland Cube 80XL, Peavey112-Valve King and Special, Marshall 100VS.
- Chris Templeton
- Posts: 2576
- Joined: 25 Sep 2012 4:20 pm
- Location: The Green Mountain State
Zane, You would really be great at tapping on your fretboard steel. A little compression, maybe some distortion and something to mute the strings over the low strings while you're tapping and you should be good to go.
Here's some some songs with tapping, guitar style and steel: http://thetapper.bandcamp.com.
It should be fun for you since you are an expert at your positions and right hand. With tapping, you also don't have to drag that bar around:0)
Precise pedal and knee bends while tapping is really nice too.
I was Robert Randolph's guitar tech in 2002 and was hoping he might start tapping. He did tap some with two bars though; which is hard to keep in tune, especially at speeds He is an amazing steeler and so are Chuck and Derrick Campbell (pedal and lap players respectively) from the "Sacred Steel" vein. Check them out of they're in your neighborhood, for an uplifting take on the "twang".
Here's some some songs with tapping, guitar style and steel: http://thetapper.bandcamp.com.
It should be fun for you since you are an expert at your positions and right hand. With tapping, you also don't have to drag that bar around:0)
Precise pedal and knee bends while tapping is really nice too.
I was Robert Randolph's guitar tech in 2002 and was hoping he might start tapping. He did tap some with two bars though; which is hard to keep in tune, especially at speeds He is an amazing steeler and so are Chuck and Derrick Campbell (pedal and lap players respectively) from the "Sacred Steel" vein. Check them out of they're in your neighborhood, for an uplifting take on the "twang".
- Wally Moyers
- Posts: 1153
- Joined: 4 Aug 1998 11:00 pm
- Location: Lubbock, Texas
- Contact:
Zane, I'm very interested in this kind of playing! It would be cool if b0b would consider adding a subject to the index for this kind of playing... It could really spark some interesting ideas..Zane King wrote:I wish there was more interest in this style of steel guitar playing. Does anyone know of a forum/website kind of thing where slide playing and steel guitar played in more of rock/blues style is promoted? While this Forum here is obviously wonderful it is also very obvious that this place exists for the more traditional roots of our instrument. I know there are exceptions here, of course. That said, I just wish I could find a site where more extreme playing on steel guitars and slides is being promoted. Any thoughts or ideas?
Wally M. - thanks for your comment here. I believe there is indeed merit for this on the Forum. After my reply above, I did search for this kind of topic here on the Forum. Certainly, there have been some threads (and good ones) that talk about this more aggressive approach to pedal steel. That said, likely there is some need for there to be online community where this can be discussed and promoted. I do think it would indeed be some great dialogue and eventually it could help the growth overall of the instrument. Still, I don't have time to try and re-event the wheel so my hope here that bOb will consider a whole section dedicated to this conversation. I haven't asked him yet. I'm sure it has been discussed before. Does anyone know if this has ever been brought up to make a whole section of the Forum that would be dedicated to the more (rock I will call it) side of the pedal steel?
Zane King
Email: zaneking@me.com
Email: zaneking@me.com
- Chris Templeton
- Posts: 2576
- Joined: 25 Sep 2012 4:20 pm
- Location: The Green Mountain State
I don't really disagree with you Chris. Yet I don't want to see us give up either. I don't know the answer exactly but I do know there is something to this. Even your Tapper is a product of the pedal steel to some degree. In the right arena of promotion that could really take off. Keep pushing!!
Zane King
Email: zaneking@me.com
Email: zaneking@me.com
- Wally Moyers
- Posts: 1153
- Joined: 4 Aug 1998 11:00 pm
- Location: Lubbock, Texas
- Contact:
Instead of rock, I would suggest "out of the box" type section. It could be jazz, rock, blues, western swing, anything that pushes the current limits of traditional steel styles.. In the 80s I did some shows with "Asleep At The Wheel" when Wally Murphy was playing with them. He did some great out of the box playing that had the crowd on their feet... Anything new and innovative would be great to hear...
- Chris Templeton
- Posts: 2576
- Joined: 25 Sep 2012 4:20 pm
- Location: The Green Mountain State
Wally, I saw/heard the Wheel with Wally Murphy several times and he was one of the best steel players they ever had in their lineup. He sure would tear up that Dekley. John Ely was totally outstanding too and I feel he is the best living Hawaiian player there is today. Go hear him at the Hawaiian show in Joliet this year. John is fantastic and a really nice person too.
It's a strange time in the music world these days and the youngsters like to get their stuff for free. (did I just say youngsters?).
Thanks for your encouraging word's Zane. Keep on pushing it too.
It's a strange time in the music world these days and the youngsters like to get their stuff for free. (did I just say youngsters?).
Thanks for your encouraging word's Zane. Keep on pushing it too.
- Chris Templeton
- Posts: 2576
- Joined: 25 Sep 2012 4:20 pm
- Location: The Green Mountain State