McKenna Resonator Guitars: 8 String Woodbody Tricone
Moderator: Brad Bechtel
-
- Posts: 424
- Joined: 20 Apr 2002 12:01 am
- Location: South Windsor, Connecticut, USA
- Contact:
McKenna Resonator Guitars: 8 String Woodbody Tricone
I've been working on this tricone model for about a month. It is a little different in construction in that it uses the standard Dobro style Body size, coverplate, and soundscreens instead of the tricone coverplate and lattice (I never really cared too much for the origional style tricone coverplate). With a little trial and error and experimentation, I was able to use similar parts inside the body as well as the same hardware I use on my standard single cone guitars and the same body mold.
The inside of the guitar is braced well under the floor where the cones sit and uses light weight square sound posts/supports (not dowels). The neck uses a shorter (but similar) neck pole that I use in the single cone guitars and mounts to a block about mid way in the guitar forward of the cones. The hole in the top between the 2 soundscreens gains access to the wood screw that secures the neck pole to the block.
The scale length is 24 3/4" shortened from the 25" I use on the single cone guitars so that the rear cone will clear the tailblock.
The guitar is made from Birch (top, back, and sides) with a mahogany neck (like my other standard models).
As of now, it is still under construction, but I have it strung up to see how everything sounds. It has a very nice tricone tone and volume but with the warmth of the wood body. I have it setup for G6 tuning, but with the proper gauge strings can be tuned to most anything.
I will be offering them in 6,7, and 8 string models.
Here are a few photos of the building process...
Here is the bottom half on the body showing the neck pole coming through the body and the mounting block, as well as the cone floor. The forward end of the pole gets mortised into the neck.
The inside of the guitar is braced well under the floor where the cones sit and uses light weight square sound posts/supports (not dowels). The neck uses a shorter (but similar) neck pole that I use in the single cone guitars and mounts to a block about mid way in the guitar forward of the cones. The hole in the top between the 2 soundscreens gains access to the wood screw that secures the neck pole to the block.
The scale length is 24 3/4" shortened from the 25" I use on the single cone guitars so that the rear cone will clear the tailblock.
The guitar is made from Birch (top, back, and sides) with a mahogany neck (like my other standard models).
As of now, it is still under construction, but I have it strung up to see how everything sounds. It has a very nice tricone tone and volume but with the warmth of the wood body. I have it setup for G6 tuning, but with the proper gauge strings can be tuned to most anything.
I will be offering them in 6,7, and 8 string models.
Here are a few photos of the building process...
Here is the bottom half on the body showing the neck pole coming through the body and the mounting block, as well as the cone floor. The forward end of the pole gets mortised into the neck.
Last edited by Gregg McKenna on 19 Nov 2012 6:17 am, edited 5 times in total.
-
- Posts: 424
- Joined: 20 Apr 2002 12:01 am
- Location: South Windsor, Connecticut, USA
- Contact:
Here's how it looks without the top with the cones installed. The upper linings are not installed yet.
Here's the cone floor being glued in
Last edited by Gregg McKenna on 19 Nov 2012 5:54 am, edited 1 time in total.
-
- Posts: 424
- Joined: 20 Apr 2002 12:01 am
- Location: South Windsor, Connecticut, USA
- Contact:
Here's the guitar with the top glued on and bindings installed. The small hole between the 2 soundscreens is for the screw that holds the neck pole to the block. A mahogany brace crosses over at the 12:00 position at the front of the resonator opening.
The body size and shape are the same as my single cone guitars.
Last edited by Gregg McKenna on 19 Nov 2012 5:55 am, edited 1 time in total.
-
- Posts: 424
- Joined: 20 Apr 2002 12:01 am
- Location: South Windsor, Connecticut, USA
- Contact:
-
- Posts: 424
- Joined: 20 Apr 2002 12:01 am
- Location: South Windsor, Connecticut, USA
- Contact:
Here it is with the coverplate and hardware installed. (Keep in mind the guitar has not had the finishing done yet, and some of the position dots and neck decal is not installed). I have the soundscreens located a little higher than on the single cone guitars to clear the brace near the resonator opening.
If you look closely, you might be able to see the cones through the coverplate (although its somewhat hard to see in the photo).
Last edited by Gregg McKenna on 19 Nov 2012 6:06 am, edited 1 time in total.
-
- Posts: 143
- Joined: 15 Oct 2006 12:01 am
- Location: Goulais River,Ontario,Canada
- Tom Pettingill
- Posts: 2246
- Joined: 23 Apr 2007 11:10 am
- Location: California, USA (deceased)
- Michael Maddex
- Posts: 1141
- Joined: 18 Apr 2007 5:02 pm
- Location: Northern New Mexico, USA
- Contact:
- Mark Eaton
- Posts: 6047
- Joined: 15 Apr 2005 12:01 am
- Location: Sonoma County in The Great State Of Northern California
- chris ivey
- Posts: 12703
- Joined: 8 Nov 1998 1:01 am
- Location: california (deceased)
-
- Posts: 103
- Joined: 28 Mar 2009 9:02 am
- Location: South Carolina, USA
-
- Posts: 451
- Joined: 18 May 2005 12:01 am
- Location: Florida, USA
-
- Posts: 1081
- Joined: 20 Jul 2004 12:01 am
- Location: Silver Spring, Maryland, USA
-
- Posts: 424
- Joined: 20 Apr 2002 12:01 am
- Location: South Windsor, Connecticut, USA
- Contact:
Thank you for the compliments. I was playing it for awhile today on the bench. The Birch seems to bring out the tone in the cones nicely and makes a good speaker cabinet too.
String spacing is the same as my single cone guitars, and the palm rest is stock (although not much room left under there for more strings).
String spacing is the same as my single cone guitars, and the palm rest is stock (although not much room left under there for more strings).
-
- Posts: 193
- Joined: 27 Dec 2010 3:26 pm
- Location: Chassell, Michigan, USA
Ooh! This is so cool in so many ways:
The deception, like a '68 Dodge Dart with a Hemi stuffed under the hood. "Yup, boys. Just a regular ol' dobro type geetar."
8 strings for tunings options out to Pluto.
What looks to be a really well thought out design. The stick screw hole is brilliant. How many times have I had one of my guitars all back together after a cone cleaning and remembered "I FORGOT TO CHECK THE STICK SCREW!"
I have 7 and 8 string McKenna's that are much played and much loved. I don't need another guitar..., I don't need another guitar..., I don't need another guitar..., I don't need another guitar...,
A happy, safe, and blessed Thanksgiving to all,
Bogue
The deception, like a '68 Dodge Dart with a Hemi stuffed under the hood. "Yup, boys. Just a regular ol' dobro type geetar."
8 strings for tunings options out to Pluto.
What looks to be a really well thought out design. The stick screw hole is brilliant. How many times have I had one of my guitars all back together after a cone cleaning and remembered "I FORGOT TO CHECK THE STICK SCREW!"
I have 7 and 8 string McKenna's that are much played and much loved. I don't need another guitar..., I don't need another guitar..., I don't need another guitar..., I don't need another guitar...,
A happy, safe, and blessed Thanksgiving to all,
Bogue
- Roy Thomson
- Posts: 4386
- Joined: 4 Aug 1998 11:00 pm
- Location: Wolfville, Nova Scotia,Canada
-
- Posts: 2833
- Joined: 19 Jul 2005 12:01 am
- Location: Santa Rosa, California, USA
Like Mr. Sandberg above, I don't NEED another guitar. But it's the sound of the thing that is important to me. There really is nothing like a tricone for either tone or acoustic volume. I'll sell my other guitars.......errrr....except for the other McKenna of course. I need to decide 6 or 8. I have been thinking very strongly about going back to 6. I can do almost everything I do on 6. But I tend to lean towards 8 because that little bit of stuff the extra two strings give me makes a really big difference. I am holding my breath in anticipation of the price.
Amor vincit omnia
-
- Posts: 2833
- Joined: 19 Jul 2005 12:01 am
- Location: Santa Rosa, California, USA
-
- Posts: 355
- Joined: 11 Jun 2008 7:35 am
here's some pics of my ol' Donmo galvo tricone..
http://i1216.photobucket.com/albums/dd3 ... oguts6.jpg
http://i1216.photobucket.com/albums/dd3 ... oguts7.jpg
http://i1216.photobucket.com/albums/dd3 ... oguts3.jpg
http://i1216.photobucket.com/albums/dd3 ... 010097.jpg
just for G.I.
http://i1216.photobucket.com/albums/dd3 ... oguts6.jpg
http://i1216.photobucket.com/albums/dd3 ... oguts7.jpg
http://i1216.photobucket.com/albums/dd3 ... oguts3.jpg
http://i1216.photobucket.com/albums/dd3 ... 010097.jpg
just for G.I.
DUDE! That thing is COOL!Ron Ellison wrote:here's some pics of my ol' Donmo galvo tricone..
http://i1216.photobucket.com/albums/dd3 ... oguts6.jpg
http://i1216.photobucket.com/albums/dd3 ... oguts7.jpg
http://i1216.photobucket.com/albums/dd3 ... oguts3.jpg
http://i1216.photobucket.com/albums/dd3 ... 010097.jpg
just for G.I.
Great pic at the end. I love how it has the finish of an old washtub.
If Music Be the Food of Love, Play On. -Shakespeare
___________________________________________
1941 Ric B6 / 1948 National Dynamic / 1951 Bronson Supro / Custom teak wood Allen Melbert / Tut Taylor Dobro / Gold Tone Dojo / Martin D15S / Eastman P10
___________________________________________
1941 Ric B6 / 1948 National Dynamic / 1951 Bronson Supro / Custom teak wood Allen Melbert / Tut Taylor Dobro / Gold Tone Dojo / Martin D15S / Eastman P10
-
- Posts: 657
- Joined: 13 Nov 2001 1:01 am
- Location: Greeneville, TN, USA
-
- Posts: 424
- Joined: 20 Apr 2002 12:01 am
- Location: South Windsor, Connecticut, USA
- Contact:
- Mark Eaton
- Posts: 6047
- Joined: 15 Apr 2005 12:01 am
- Location: Sonoma County in The Great State Of Northern California