Msa Classic
Moderator: Shoshanah Marohn
-
- Posts: 92
- Joined: 12 Oct 2000 12:01 am
- Location: ENGLAND
Msa Classic
I have been offered a superb looking MSA CLASSIC S10 5X4 in exchange for my rebuilt SHO-BUD.The MSA has a GLE66 p/u fitted would this be worth a swap?as the SHO-BUD is too heavy it is a twin neck with a pad thanks .
THANKS AND GOD BLESS JIM.
THANKS AND GOD BLESS JIM.
-
- Posts: 110
- Joined: 11 May 1999 12:01 am
- Location: Cincinnati, Ohio
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
If one will weigh an MSA "without the case" and compare it to other brands of the same era, they may be surprised to learn the MSA was little if any heavier than other guitars.
If the MSA is heavier in specific instances, that weight difference is most likely attributed to the fact there was an aluminum frame around the underside perimeter of the MSA, which others did not have at the time.
The aluminum frame certainly contributed greatly to the mechanical reliability, stability and the reputation of MSA guitars staying in tune exceptionally well.
The aluminum frame also quite possibly played a great role in contributing to the fact that so many MSA guitars are still functioning perfectly and being played today that are between 20 and 30 years old.
If the MSA is heavier in specific instances, that weight difference is most likely attributed to the fact there was an aluminum frame around the underside perimeter of the MSA, which others did not have at the time.
The aluminum frame certainly contributed greatly to the mechanical reliability, stability and the reputation of MSA guitars staying in tune exceptionally well.
The aluminum frame also quite possibly played a great role in contributing to the fact that so many MSA guitars are still functioning perfectly and being played today that are between 20 and 30 years old.
-
- Posts: 92
- Joined: 12 Oct 2000 12:01 am
- Location: ENGLAND
My 26 year old MSA Classic S12 is not that heavy,i have never weighed it but i believe the case weighs as much as the guitar.This guitar is very stable,stays in tune and hardly ever breaks a string.I thought about buying a new steel but instead i installed a
George L E66 pickup in this little jewel.I really dont think i could find a steel guitar
that i would be happier with.Well maybe a new
MSA.
Wayne Broyles
George L E66 pickup in this little jewel.I really dont think i could find a steel guitar
that i would be happier with.Well maybe a new
MSA.
Wayne Broyles
-
- Posts: 21192
- Joined: 16 Feb 1999 1:01 am
- Location: Glen Burnie, Md. U.S.A.
-
- Posts: 1580
- Joined: 14 Jan 2002 1:01 am
- Location: Keller, Texas/Birmingham, AL, R.I.P.
- Contact:
- Mike Perlowin
- Posts: 15171
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA
- Contact:
-
- Posts: 110
- Joined: 11 May 1999 12:01 am
- Location: Cincinnati, Ohio
I meant no offense to the MSA.
I should point out that my old MSA Classic D-10 was the sweetest sounding and playing guitar I ever had, and the tuning was rock solid. But it was brutally heavy to schlep around. The heaviest guitar I ever lifted was an early 60's Rickenbacker. It must have weighed 80 lbs.
Mason
I should point out that my old MSA Classic D-10 was the sweetest sounding and playing guitar I ever had, and the tuning was rock solid. But it was brutally heavy to schlep around. The heaviest guitar I ever lifted was an early 60's Rickenbacker. It must have weighed 80 lbs.
Mason
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
Mason E....Your comment was certainly not taken as being offensive. Many felt the same in that the old MSA guitars were too heavy, which was one reason why we later built the small SS model.
In my response post I simply wanted to mention that the weight of the MSA "case" itself, is what started the rumor that the MSA guitar was so heavy.
Prior to making the decision to include a heavy case, I had sent out a survey asking players if they wanted a lighter case which did not protect the guitar as well, or a heavier case which did. They overwhelmingly said they wanted a heavier case to best protect the guitar. That decision turned out to be a "catch 22" for MSA.
I also want to thank you for being a past MSA owner and for your positive comments about your guitar.
In my response post I simply wanted to mention that the weight of the MSA "case" itself, is what started the rumor that the MSA guitar was so heavy.
Prior to making the decision to include a heavy case, I had sent out a survey asking players if they wanted a lighter case which did not protect the guitar as well, or a heavier case which did. They overwhelmingly said they wanted a heavier case to best protect the guitar. That decision turned out to be a "catch 22" for MSA.
I also want to thank you for being a past MSA owner and for your positive comments about your guitar.
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
- Rex Thomas
- Posts: 1202
- Joined: 17 Jan 2002 1:01 am
- Location: Thompson's Station, TN
Just my opinions based on experience, ok? No schmoozing, no playing favorites, just past facts:
Commenting on Jim's (compuserve) original question, IMHO, if the MSA S-10 is really a single neck 10 it would still be lighter than the SD-10 Sho-Bud, aluminum frame & all.
Since the MSA has an E-66, I'd say go for it. With a little brighter pickup, & the build quality, it will LAST. You'll give out before it does. I've had other guitars where the opposite was the case.
Speaking of cases I wasn't familiar with the heavier MSA case. My 2 gtrs. had the ABS cases (it's ok Jim S., I wouldn't have known they were ABS if they bit me or flat out killed me.) and although the mileage might vary, those cases were INDESTRUCTIBLE. Hey, those cases went EVERYWHERE; plane, bus, truck, dropped at least twice by roadies who wouldn't know a steel guitar from an egg slicer. So I have respect for the ABS case, in my case.
Another past fact (once again, mileage may vary) was both my MSA's NEVER broke strings. It did lend itself to more time playing & less time kadanking with it.
FWIW, go with the MSA. I think you'll be happier in the long run. <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Rex Thomas on 11 October 2002 at 10:16 AM.]</p></FONT>
Commenting on Jim's (compuserve) original question, IMHO, if the MSA S-10 is really a single neck 10 it would still be lighter than the SD-10 Sho-Bud, aluminum frame & all.
Since the MSA has an E-66, I'd say go for it. With a little brighter pickup, & the build quality, it will LAST. You'll give out before it does. I've had other guitars where the opposite was the case.
Speaking of cases I wasn't familiar with the heavier MSA case. My 2 gtrs. had the ABS cases (it's ok Jim S., I wouldn't have known they were ABS if they bit me or flat out killed me.) and although the mileage might vary, those cases were INDESTRUCTIBLE. Hey, those cases went EVERYWHERE; plane, bus, truck, dropped at least twice by roadies who wouldn't know a steel guitar from an egg slicer. So I have respect for the ABS case, in my case.
Another past fact (once again, mileage may vary) was both my MSA's NEVER broke strings. It did lend itself to more time playing & less time kadanking with it.
FWIW, go with the MSA. I think you'll be happier in the long run. <FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Rex Thomas on 11 October 2002 at 10:16 AM.]</p></FONT>
- Bobby Lee
- Site Admin
- Posts: 14863
- Joined: 4 Aug 1998 11:00 pm
- Location: Cloverdale, California, USA
- Contact:
ABS is a plastic, according to the Oxford University Press:
------------------
<small><img align=right src="http://b0b.com/b0b.gif" width="64" height="64">Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (F Diatonic), Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6), Roland Handsonic
I love my plastic Wheel-Eze case.<SMALL>The ABS (acrylonitrile-butadiene-styrene) family of plastics are copolymers: uses include telephone and computer body shells and piping.</SMALL>
------------------
<small><img align=right src="http://b0b.com/b0b.gif" width="64" height="64">Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (F Diatonic), Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6), Roland Handsonic
- Al Marcus
- Posts: 9440
- Joined: 12 May 1999 12:01 am
- Location: Cedar Springs,MI USA (deceased)
- Contact:
I think my Sho-Bud Professional was one of the heavy guitars I had.
I had a S10 Msa classic and I always carried it around in my van or trunk of my car, Without the Case.
I thought it was pretty light. It had 5 pedals and 4 knee levers, a nice little guitar.
These guitars are well engineered and well built to last.
Put in a George L E66 pickup in it and you are all set.
......................al
I had a S10 Msa classic and I always carried it around in my van or trunk of my car, Without the Case.
I thought it was pretty light. It had 5 pedals and 4 knee levers, a nice little guitar.
These guitars are well engineered and well built to last.
Put in a George L E66 pickup in it and you are all set.
......................al
-
- Posts: 2218
- Joined: 21 Jun 1999 12:01 am
- Location: Keller Texas USA, R.I.P.
Thanks for the clearification Bobby L. I never felt a need to go to the trouble to research the true definition of ABS, but I do appreciate your taking the time to do so and calling it to my attention.
I do recall our case supplier was very emphatic and specific when telling us, the MSA case should not to be referred to as merely "plastic".
Perhaps he should have said, ABS is a superior derivative to the product known as "plastic", and the intent for the different connotation was to denote a higher quality while circumventing the mental image we each have when we hear the word,"plastic".
I do recall our case supplier was very emphatic and specific when telling us, the MSA case should not to be referred to as merely "plastic".
Perhaps he should have said, ABS is a superior derivative to the product known as "plastic", and the intent for the different connotation was to denote a higher quality while circumventing the mental image we each have when we hear the word,"plastic".
-
- Posts: 6870
- Joined: 27 Nov 2000 1:01 am
- Location: Oklahoma City, OK USA, (deceased)
- Contact:
- Fred Shannon
- Posts: 3363
- Joined: 27 Sep 2002 12:01 am
- Location: Rocking "S" Ranch, Comancheria, Texas, R.I.P.
- Contact:
My first steel was an MSA Classic S10, with ABS case. The case was fine, but the handle kept coming off.
Overall, a highly reliable and playable instrument.
<FONT SIZE=1 COLOR="#0e236b">
Oxford Univ Press also says Bakelite is a plastic.
Overall, a highly reliable and playable instrument.
<FONT SIZE=1 COLOR="#0e236b">
Oxford Univ Press also says Bakelite is a plastic.
Anyone care to cause a stir by posting about a "Plastic Rickenbaker Lap Steel" over in "No Peddlers"? </font><FONT SIZE=1 COLOR="#8e236b"><p align=CENTER>[This message was edited by Joey Ace on 12 October 2002 at 08:33 AM.]</p></FONT><SMALL>"a thermosetting plastic produced by the polymerization of phenol (C6H5OH) and methanal (formaldehyde, HCHO). "</SMALL>
-
- Posts: 6870
- Joined: 20 Apr 2002 12:01 am
- Location: Over there
ABS? it's plastic. My new Monte Carlo? Plastic. Our old double-knit polyester pants? Plastic. The carpet in your house? Artificial body parts? Good lap steels? The MSA Millenium? The "Mica" my Emmons is covered in? Good old model car, cheap watch, table radio PLASTIC. If it's good enough for Dustin Hoffman(see Graduate, the)then it's good enough for me.