Origin Effects SlideRig Pedal for Little Feat Tone
Moderator: Shoshanah Marohn
-
- Posts: 2
- Joined: 9 Apr 2012 9:44 am
- Location: Oxfordshire, UK
Origin Effects SlideRig Pedal for Little Feat Tone
I've just started selling a compressor pedal, aimed at slide guitarists. My aim in designing the unit, was to try to recreate the 70's Little Feat studio slide-tone.
The circuit is based around two high quality 1176-style (studio comp) compressors used in a chain arrangement. This makes the guitar very sensitive and also really helps iron out peaks. More to the point, the dual compressor circuits create super-sustaining solo lines with a characteristic attack and shimmer.
The pedal features two sets of controls, to allow the player to dial in two differing settings and quickly jump between them in a live scenario.
• 100% Class-A discrete signal path
• Ultra-fast "FET" response
• Attack & Release presets
• Studio-grade "discrete" preamplifier
• Rugged VU-style meter
• Low-noise electronics
• Optimised for guitar/bass but also great for
processing recorded instruments
• Selectable True or Buffered Bypass
• 50 hours life from single 9V / PP3 cell
• Optional external power (9-18V DC)
• Traditional Through-Hole PCB
I've made some demo clips and would love to know what people think...
This should work for Pedal/Lap-Steel too - sadly, I no longer have either, so haven't tried it!
http://www.youtube.com/watch?v=sg2oA46hHfc
http://www.youtube.com/watch?v=DZi6NOUn6o8
More info can be found at:
www.origineffects.com
http://www.facebook.com/OriginEffects
The circuit is based around two high quality 1176-style (studio comp) compressors used in a chain arrangement. This makes the guitar very sensitive and also really helps iron out peaks. More to the point, the dual compressor circuits create super-sustaining solo lines with a characteristic attack and shimmer.
The pedal features two sets of controls, to allow the player to dial in two differing settings and quickly jump between them in a live scenario.
• 100% Class-A discrete signal path
• Ultra-fast "FET" response
• Attack & Release presets
• Studio-grade "discrete" preamplifier
• Rugged VU-style meter
• Low-noise electronics
• Optimised for guitar/bass but also great for
processing recorded instruments
• Selectable True or Buffered Bypass
• 50 hours life from single 9V / PP3 cell
• Optional external power (9-18V DC)
• Traditional Through-Hole PCB
I've made some demo clips and would love to know what people think...
This should work for Pedal/Lap-Steel too - sadly, I no longer have either, so haven't tried it!
http://www.youtube.com/watch?v=sg2oA46hHfc
http://www.youtube.com/watch?v=DZi6NOUn6o8
More info can be found at:
www.origineffects.com
http://www.facebook.com/OriginEffects
-
- Posts: 551
- Joined: 12 Mar 2004 1:01 am
- Location: Hendersonville, Tennessee, USA
- Rich Peterson
- Posts: 893
- Joined: 8 Dec 2008 8:21 pm
- Location: Moorhead, MN
-
- Posts: 2
- Joined: 9 Apr 2012 9:44 am
- Location: Oxfordshire, UK
Origin Effects SlideRig US Pricing
I'm based in the UK. The cost of an exported SlideRig would be $299 + $39.99 shipping (UK to USA express 2/3 days).
I currently have some units for sale on Ebay, or will be more than happy to deal direct.
Also, I'm happy to accept returns, subject to condition - all the usual stuff!!!
Thanks for your interest!
I currently have some units for sale on Ebay, or will be more than happy to deal direct.
Also, I'm happy to accept returns, subject to condition - all the usual stuff!!!
Thanks for your interest!
- Per Berner
- Posts: 1808
- Joined: 10 Aug 2004 12:01 am
- Location: Skövde, Sweden
- Contact:
- Rich Peterson
- Posts: 893
- Joined: 8 Dec 2008 8:21 pm
- Location: Moorhead, MN
- Mike Perlowin
- Posts: 15171
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA
- Contact:
Impressive.
I have a question. Why, when you use an external power supply, does it require one with a positive ground? What is the advantage of a positive ground over a negative one?
I have a question. Why, when you use an external power supply, does it require one with a positive ground? What is the advantage of a positive ground over a negative one?
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
-
- Posts: 2
- Joined: 9 Apr 2012 9:44 am
- Location: Oxfordshire, UK
Hi Mike.Mike Perlowin wrote:Impressive.
I have a question. Why, when you use an external power supply, does it require one with a positive ground? What is the advantage of a positive ground over a negative one?
When in use, the negative side of the supply is connected to electrical ground - this gives you a positive supply voltage inside the pedal.
I think you are possibly referring to the fact that in most cases the centre pin of the 2.1mm power-connector is wired-negative (so the outer part of the connector is positive. If so, there is no advantage - it's just convention (this is what most manufacturers specify). It just makes it easier to buy a supply that works on lots of pedals!
-
- Posts: 381
- Joined: 24 Jul 2001 12:01 am
- Location: Newtown, PA
-
- Posts: 2
- Joined: 9 Apr 2012 9:44 am
- Location: Oxfordshire, UK
- James Mayer
- Posts: 1526
- Joined: 5 Sep 2006 12:01 am
- Location: back in Portland Oregon, USA (via Arkansas and London, UK)
- Mike Perlowin
- Posts: 15171
- Joined: 4 Aug 1998 11:00 pm
- Location: Los Angeles CA
- Contact:
Simon, I must admit I'm confused. In past years, the center pin was positive and the ground was negative, and then many of the manufacturers reversed this.Simon Keats wrote:
I think you are possibly referring to the fact that in most cases the centre pin of the 2.1mm power-connector is wired-negative (so the outer part of the connector is positive. If so, there is no advantage - it's just convention (this is what most manufacturers specify). It just makes it easier to buy a supply that works on lots of pedals!
Today I have some pedals that are wired one way, and some that are wired the other. If it doesn't make any difference, why did the manufacturers change the system?
I've been told that if you hook up the wrong power supply you can damaged the unit.
Please visit my web site and Soundcloud page and listen to the music posted there.
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
http://www.mikeperlowin.com http://soundcloud.com/mike-perlowin
-
- Posts: 2
- Joined: 9 Apr 2012 9:44 am
- Location: Oxfordshire, UK
-
- Posts: 2
- Joined: 9 Apr 2012 9:44 am
- Location: Oxfordshire, UK
Certainly using the wrong supply can damage a pedal (or anything electrical). Mine are protected against reverse-connected supplies (as I would think most are these days).Mike Perlowin wrote:Simon, I must admit I'm confused. In past years, the center pin was positive and the ground was negative, and then many of the manufacturers reversed this.Simon Keats wrote:
I think you are possibly referring to the fact that in most cases the centre pin of the 2.1mm power-connector is wired-negative (so the outer part of the connector is positive. If so, there is no advantage - it's just convention (this is what most manufacturers specify). It just makes it easier to buy a supply that works on lots of pedals!
Today I have some pedals that are wired one way, and some that are wired the other. If it doesn't make any difference, why did the manufacturers change the system?
I've been told that if you hook up the wrong power supply you can damaged the unit.
I guess a supply is one more thing a company can sell you and so perhaps that's why some companies deviate from the normal polarity! Older pedals using germanium transistors do need a negative supply, and so there's another "slightly less pessimistic" reason!
-
- Posts: 381
- Joined: 24 Jul 2001 12:01 am
- Location: Newtown, PA