Sho-Bud Pick-Up

Steel guitar amplifiers, effects, etc.

Moderator: Shoshanah Marohn

Post Reply
Paul Gavic
Posts: 24
Joined: 15 Apr 2011 6:04 pm
Location: Wisconsin, USA

Sho-Bud Pick-Up

Post by Paul Gavic »

I just picked up a '73 Sho-Bud Pro II. The previous owner put a replacement pick-up in the E9 neck that looks like a Tru-Tone because of the larger magnets but is shorting out and cannot be adjusted close to the strings. I would like to buy a Sho-Bud pick-up that is as close to original as possible. How can I find a good one?
Image
User avatar
Tom Wolverton
Posts: 2874
Joined: 8 May 2008 3:52 pm
Location: Carpinteria, CA

Re: Sho-Bud Pick-Up

Post by Tom Wolverton »

James Morehead or Jerry Wallace should be able to help you out.

Nice guitar, by the way. I didn't know they made narrow pedals as early as '73. Beautiful wood.
To write with a broken pencil is pointless.
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

Lovely guitar! Maybe the pedals were modded? How about a pic of the underside?
User avatar
Dave Grafe
Posts: 4457
Joined: 29 Oct 2004 12:01 am
Location: Hudson River Valley NY
Contact:

Post by Dave Grafe »

Square cut body with narrow pedals, but has the colored fretboard, very nice!
Paul Gavic
Posts: 24
Joined: 15 Apr 2011 6:04 pm
Location: Wisconsin, USA

Post by Paul Gavic »

I am not sure of the year can you help me out by looking at these pictures?
Image
Image
User avatar
John Billings
Posts: 9344
Joined: 11 Jul 2002 12:01 am
Location: Ohio, USA

Post by John Billings »

A very beautiful guitar,,, but not a '73. I'm into the older ones, from '59 to '74. So I can't add anything else.
Paul Gavic
Posts: 24
Joined: 15 Apr 2011 6:04 pm
Location: Wisconsin, USA

Post by Paul Gavic »

Might be getting off topic here but here is a picture of the underside. Quite a few mods and a broken bell crank. Not sure what year it is.
Image
User avatar
Tom Wolverton
Posts: 2874
Joined: 8 May 2008 3:52 pm
Location: Carpinteria, CA

Post by Tom Wolverton »

If you can find the serial number on the guitar, this might help you narrow it down:

http://www.donblood.net/page5.php
To write with a broken pencil is pointless.
User avatar
Dave Grafe
Posts: 4457
Joined: 29 Oct 2004 12:01 am
Location: Hudson River Valley NY
Contact:

Post by Dave Grafe »

...and tear-drop levers, too :?
User avatar
Kevin Mincke
Posts: 3093
Joined: 27 Dec 1998 1:01 am
Location: Farmington, MN (Twin Cities-South Metro) USA
Contact:

Post by Kevin Mincke »

Grover tuners, gumby head...77/78
User avatar
James Morehead
Posts: 6944
Joined: 19 May 2003 12:01 am
Location: Prague, Oklahoma, USA - R.I.P.

Post by James Morehead »

Beautiful wood! Stay with Truetones. That particular Truetone may not be made for your guitar--can't tell from your pictures. But Jerry Wallace makes the closest thing to original Shobud pickups. Infact better. Trying to use originals, you will play heck to find originals that are not microphonic or wound to optimum performance. 17.5K and 11K on the coiltap seems to be the ideal winding (with the modern day wire available) for most shobud guitars.
"Good judgement comes from experience, and a lot of that comes from bad judgement"~old cowboy proverb.
shobud@windstream.net
Post Reply