| Author |
Topic: Reverb pan for Nashville 400 |
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 29 Dec 2010 3:57 pm |
|
I need to know the model # for the reverb pan in a Nashville 400. If anyone has a source as well, I need to purchase one.
Thanks. |
|
|
|
Chuck Snider R.I.P.
From:
West Virginia, USA - Morgantown, WV
|
Posted 29 Dec 2010 11:09 pm
|
|
Steve, there are a few places to acquire a replacement reverb tank. I've had good luck with Mojo, and they were very helpful over the phone to insure I got the correct reverb unit. www.mojotone.com
There is also Antique Electronic Supply www.tubesandmore.com/
And you might want to call the folks down at Peavey. you can google them, then call them up, they are usually pretty helpful as well. And they're not far from you.
-Chuck
_________________
GFI U-12 Ultra Keyless, Carter Black U-12, both with Alumitones, and a sweet '70 Sho-Bud Permanent D-10, NV400 in Rick Johnson cabs, NV112, '73 Vibrosonic in Rick Johnson cabs, Hilton pedal, Steeler's Choice seat, Bessdang Gizmos from Dale Hansen, and a few other widgets and doodads.
I may not sound good, I just don't wanna sound bad. |
|
|
|
Derrell Stephens
From:
Shreveport, La. USA
|
Posted 30 Dec 2010 9:35 am
|
|
I think I have one in stock...I'll look Friday when I get back from travels.
D |
|
|
|
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 31 Dec 2010 9:25 am tank
|
|
| Thanks, I appreciate it. |
|
|
|
Derrell Stephens
From:
Shreveport, La. USA
|
Posted 4 Jan 2011 12:31 pm
|
|
| Steve I have a 2EB2C1B Ruby Pan (2 springs), but no 4EB2C1B Accutronics. The impedances are the same but the decay may be different. |
|
|
|
Steve Spitz
From:
New Orleans, LA, USA
|
Posted 4 Jan 2011 4:35 pm tank
|
|
Thanks Derrell, I`ll consider it. Do you think the decay is longer,or how would it compare to the stock tank?
Thanks again. |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 4 Jan 2011 5:30 pm
|
|
Peavey typically uses:
9EB2C1B, 3 spring medium decay
4EB2C1B, 2 spring medium decay
codes are:
4 and 9 are 16 3/4" long
E 600 ohms input impedance (not DC ressitance)
B 2,250 ohms output impedance
2 medium decay (1.75 to 3.0 sec.)
C Input Insulated, Output Grounded
1 No Lock
B mounting, Horizontal, Open Side Down |
|
|
|
Ken Fox
From:
Nashville GA USA
|
Posted 4 Jan 2011 7:05 pm
|
|
The Ruby tank is perfect as well for the Peavey amps, here are the Ruby specs:
Ruby RRVL-2EB2C1B
Replacement for many Peavey amps. Length: 42,5cm. 2x2 springs. 600 Ohm / 56 Ohm (input impedance / DC). 2250 Ohm / 200 Ohm (output impedance / DC). |
|
|
|
